Results 11 to 20 of about 2,331 (118)
Ku Band microstrip patch antenna
2015 23nd Signal Processing and Communications Applications Conference (SIU), 2015 In this study, a microstrip antenna operating at 11.56 GHz is designed and simulation results are presented. The antenna air thickness is 5 mm and the gap between the antenna and ground is 2.5 mm. Cell size is regarded as 0.75 mm. The antenna was simulated in the frequency range of 5-15 GHz. S11, the input reflection coefficient parameter has the value
Çalışkan, Kaan +4 more
openaire +2 more sources
Microstrip antenna design with low frequency
2018 26th Signal Processing and Communications Applications Conference (SIU), 2018 In this paper, we design patch antenna for high frequency (HF) and very high frequency (VHF). Due to size problems, patch antennas are not suitable for lower frequencies. In order to overcome these problems we try to different approach. First of all, we think a dipoi antenna for a certain frequency, in which desired microstrip antenna operate, then we ...
Eksim, Ali, Cumurcu, Onur
openaire +2 more sources
International Journal for Research in Applied Science and Engineering Technology, 2022 Abstract: Performance parameters like return loss, voltage standing wave ratio, gain, and radiation pattern are calculated. Design frequency is 2.4 GHz, the copper-coated substrate material is RT Duroid 5880 having dielectric constant ε=2.2 and thickness is 1.6 mm. The feeding technique, employed in Microstrip patch Antenna is Microstrip 50 Ω feed line.
Pradeep Kumar +2 more
openaire +1 more source
Small Microstrip Patch Antennas
Electronics Letters, 1995 As stated in Chapter 1, one of the many advantages of microstrip patch technology over its competitors is its low profile and hence small volume. Another key advantage of this printed antenna is the relative ease in which it can be connected to the feed network, as was highlighted in Chapter 2.
openaire +1 more source
The microstrip antenna for 5GHz [PDF]
Journal of the Korea Academia-Industrial cooperation Society, 2011 In this paper, 5Ghz microstrip patch antenna for wireless LAN is designed, fabricated, and measured. To obtain wide bandwidth and high gain, antenna parameters such as patch size(W, L), the length of the slot(C), and the slot width(D) are simulated by HFSS(High Frequency Structure Simulator).
openaire +1 more source
Microstrip Antenna Development for Radar Sensor. [PDF]
Sensors (Basel), 2023 Nagy L.
europepmc +1 more source
Low-Loss Paper-Substrate Triple-Band-Frequency Reconfigurable Microstrip Antenna for Sub-7 GHz Applications. [PDF]
Sensors (Basel), 2023 Singh AK +8 more
europepmc +1 more source
The Design and Development of a Microstrip Antenna for Internet of Things Applications. [PDF]
Sensors (Basel), 2023 Anchidin L +4 more
europepmc +1 more source
Broadband Flexible Microstrip Antenna Array with Conformal Load-Bearing Structure. [PDF]
Micromachines (Basel), 2023 Tang C +6 more
europepmc +1 more source
Low-Profile Dual-Polarized Double-Layer Microstrip Antenna for 5G and 5G Wi-Fi. [PDF]
Micromachines (Basel), 2023 An W, Tian X, Wang J, Wang S.
europepmc +1 more source