Results 31 to 40 of about 90,779 (353)
Ceramic microstructure and adhesion [PDF]
Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 1985 When a ceramic is brought into contact with a ceramic, a polymer, or a metal, strong bond forces can develop between the materials. The bonding forces will depend upon the state of the surfaces, cleanliness and the fundamental properties of the two solids, both surface and bulk.
openaire +1 more source
Effect of 1 wt% LiF additive on the densification of nanocrystalline Y2O3 ceramics by spark plasma sintering [PDF]
, 2011 Densification of nanocrystalline cubic yttria (nc-Y2O3) powder, with 18 nm crystal size and 1 wt% LiF as a sintering additive was investigated. Specimens were fabricated by spark plasma sintering at 100 MPa, within the temperature range of 700–1500 °C ...
Chaim, Rachman +3 more
core +2 more sources
Scientific Reports, 2017 In recent years, magnesium (Mg) alloys show a promising application in clinic as degradable biomaterials. Nevertheless, the poor corrosion resistance of Mg alloys is the main obstacle to their clinical application.
Feng Peng +5 more
doaj +1 more source
Cells‐Micropatterning Biomaterials for Immune Activation and Bone Regeneration
Advanced Science, 2022 Natural tissues are composed of ordered architectural organizations of multiple tissue cells. The spatial distribution of cells is crucial for directing cellular behavior and maintaining tissue homeostasis and function.
Bingjun Zhang +8 more
doaj +1 more source
Improvement of mechanical properties of zirconia-toughened alumina by sinter forging [PDF]
, 1994 ZTA powder with a composition of 85 wt% alumina/15 wt% zirconia was prepared by a gel precipitation method. Sinter forging was performed with this powder to enhance the mechanical properties of ZTA materials.
Burggraaf, A.J. +3 more
core +3 more sources
Effect of impurities and sintering temperature on properties of MgO-CaZrO3 ceramic [PDF]
, 2013 CaZrO3 -MgO ceramics are useful as refractories in kilns for the cement production. One method of manufacture of such ceramics is by sintering from m-ZrO2 and dolomite MgCa(CO3 )2 mixtures. In this work electrofused m-ZrO2 grains (fraction
Aglietti, Esteban Fausto +2 more
core +2 more sources
Novel Ceramics and Metal-Ceramic Composites via Fused Deposition Process [PDF]
, 1999 Indirect fused·· deposition process is utilized.·.. to ·fabricate controlled porosity ceramic structures using alumina, mullite, zirconia, LSCF-perovskite, tricalcium phosphate and hydroxyapatite, where pore size, pore shape and pore connectivity are ...
Atisivan, Raj +2 more
core +1 more source
Effect of the microstructure on the lifetime of dental ceramics [PDF]
Dental Materials, 2011 To evaluate the effect of the microstructure on the Weibull and slow crack growth (SCG) parameters and on the lifetime of three ceramics used as framework materials for fixed partial dentures (FPDs) (YZ - Vita In-Ceram YZ; IZ - Vita In-Ceram Zirconia; AL - Vita In-Ceram AL) and of two veneering porcelains (VM7 and VM9).Bar-shaped specimens were ...
Borba, M.; id_orcid 0000-0001-7587-9839 +6 more
openaire +3 more sources
Open Ceramics, 2022 Alumina slurries with high solids loading were hydrophobically modified by triethanolamine lauryl sulfate (TLS) to prepare ceramic foams with highly closed porosity and high strength.
Jin Zhao +6 more
doaj +1 more source
Solid Freeform Fabrication of Functional Silicon Nitride Ceramics by Laminated Object Manufacturing 1 [PDF]
, 2000 The processing of silicon nitride (Si3N4) structural ceramics by Laminated Object Manufacturing (LOM) using ceramic tape preforms was investigated. The key processing stages involved green shape formation (which used the LOM process), followed by the ...
Agarwala, M. +4 more
core +1 more source