Results 101 to 110 of about 1,198 (205)

Effect of gas flow rate during Metal Inert Gas (MIG) welding on tensile strength / Ahmad Safri Mohammed Salleh [PDF]

, 2005
This final project is a study about the effect of different gas flow rate used in Metal Inert Gas (MIG) welding on mechanical properties. Other variables such as stand off, current and speed of the welding were fixed.
Mohammed Salleh, Ahmad Safri
core  

ANALISIS KETANGGUHAN IMPACT PADA KAMPUH V PENGELASAN MIG (Metal Inert Gas) MATERIAL ASSAB 705 DENGAN VARIASI ARUS PENGELASAN

, 2023
Perkembangan teknologi serta kebutuhan konstruksi yang kokoh menjadikan teknik pengelasan sebagai pilihan utama dalam proses pembangunan konstruksi. Poros yang digunakan di pabrik gula sering mengalami kerusakan yang tidak wajar, salah satunya karena ...
Wisnu Aji Wibowo
core   +1 more source

Effect of gas flow rate during Metal Inert Gas (MIG) welding on tensile strength / Khairul Bahrein Khalid [PDF]

, 2005
This final project is a study about the effect of different gas flow rate used in Metal Inert Gas (MIG) welding on mechanical properties. Other variables such as stand off, current and speed of the welding were fixed.
Khalid, Khairul Bahrein
core  

Analisa perbandingan kekuatan hasil proses sambungan las TIG (Metal Inert Gas) dan MIG (Metal Inert Gas) terhadap aluminium 5083

, 2018
Aluminium merupakan jenis logam yang paling banyak digunakan sebagai bahan baku dalam perindustrian karena sifat aluminium sangat baik memiliki daya tahan yang unggul.
noerdianto, dian
core  

Effects of Oxide Powders as Activating Flux on AMIG 304L Welds

Crystals
Activating metal inert gas (AMIG) welding was designed to address difficulties with MIG welding, such as the limitation on workpiece thickness that may be welded in a single pass.
Kamel Touileb, Rachid Djoudjou, Abousoufiane Ouis, Abdeljlil Chihaoui Hedhibi, Hussein Alrobei, Ibrahim Abdullah Alnaser, Rizwan Ahmed Malik, Ubair Abdus Samad   +7 more
doaj   +1 more source

Pulsed metall inert gas (MIG) welding and its effects on the microstructure and element distribution of an aluminum matrix reinforced with SiC composite material

Materialwissenschaft und Werkstofftechnik, 2017
This study aims to demonstrate the effects of pulsed current on the welding pool and fusion zone microstructures of the aluminum 2014 alloy matrix composite material reinforced with 14 and 20 vol% SiC particles. A programmable synergic controlled MIG welding machine with pulsed power supply was used.
openaire   +5 more sources

Mechanical Properties of MIG Joints for Dissimilar Aluminum Alloys

Al-Khawarizmi Engineering Journal, 2017
The research aims to investigate the effects of GMAW or MIG welding process on the mechanical properties of dissimilar aluminum alloys 2024-T351 and AA 6061- T651.
Nawres Jabar Nasser
doaj  

Research of a Multi-Frequency Waveform Control Method on Double-Wire MIG Arc Welding

, 2017
To improve the energy efficiency and quality of the welding seam during the double-wire metal inert-gas (MIG) arc welding production a new multi-frequency waveform control method was proposed in this paper. In this method a multi-frequency modulation was
周亢, Yao P, Zhou, K (reprint author), Chinese Acad Sci, State Key Lab High Temp Gas Dynam, Inst Mech, Beijing 100190, Peoples R China.   +2 more
core   +1 more source

Microstructure and Mechanical Properties of Al-Mg-Zn-Er-Zr Alloy via Multi-Pass Metal Inert Gas (MIG) Welding

Metals
The microstructure and mechanical properties of the joint of a novel Al-Mg-Zn-Er-Zr alloy fabricated by multi-pass MIG welding using ER5E61 filler wire were investigated first. The results show that multi-pass MIG welding induces heterogeneous grains in the weld metal: equiaxed grains, columnar grains, and cover-pass feather-like grains. The weld metal
Haoran Che, Wu Wei, Feiran Zhang, Jieming Gao, Li Cui, Ying Han, Ting Li, Hui Huang, Shengping Wen, Wei Shi, Zuoren Nie   +10 more
openaire   +1 more source

Proceso de soldadura GMAW, para aceros ordinarios al carbón, aceros inoxidables y aluminio

Revista Politécnica, 2013
Resumen.- En sus primeras aplicaciones comerciales, el proceso fue usado para soldar aluminio con un gas de protección inerte, dando lugar al término “MIG”(metal inert gas) el cual es todavía comúnmente usado cuando se refiere a este proceso.
Mario Granja, Victor Hidalgo
doaj