Results 191 to 200 of about 1,694,054 (255)
Some of the next articles are maybe not open access.
PYROLYTIC AND OXIDATIVE STRUCTURES IN HDDI MILD COMBUSTION
International Journal of Energy for a Clean Environment, 2010The typical structure of un-premixed counter-diffusion flames in standard conditions can be significantly modified when injected flows are diluted and/or pre-heated. The increase of the fuel and/or oxidant flow dilution up to extreme conditions can lead to the formation of nonignitable mixtures. The oxidation processes can be sustained just in case the
Sabia P +4 more
openaire +10 more sources
Modeling of Ammonia MILD Combustion in Systems with Internal Recirculation
Combustion Science and Technology, 2023The present work focuses on the combustion of alternative renewable fuels, ammonia in this case, in a system, such as the Laboratory Unit CYclonic (LUCY) burner.
L. Giuntini +5 more
semanticscholar +1 more source
MILD COMBUSTION FOR FUEL-NOxREDUCTION
Combustion Science and Technology, 2004One source of pollution in the combustion of fossil fuels is the formation of nitrogen oxides. Their production is strictly bound to the presence of molecular nitrogen in the combustion air and to the so-called fuel nitrogen, that is, the N chemically bound to the fuel.
A. Cavigiolo +4 more
openaire +3 more sources
Mild Combustion of Industrial Hydrogen-Containing Byproducts
Industrial & Engineering Chemistry Research, 2007In this work, a laboratory-scale burner has been used to investigate the sustainability of mild combustion with the coke oven gas (COG), an industrial byproduct mainly constituted by methane and hydrogen (CH 4 / H 2 40/60% by volume). Operating conditions for stable mild combustion have been identified and operating parameters maps have been deduced ...
DERUDI, MARCO +2 more
openaire +3 more sources
Plasma Assisted MILD Combustion
53rd AIAA Aerospace Sciences Meeting, 2015A new test platform for plasma assisted MILD combustion is developed. The burner consists of three coaxial channels: a center fuel jet, a coflowing dielectric barrier discharge (DBD) reactor, and a vitiated air section. The preheating burner upstream of the vitiated air section enables an increase of the oxidizer temperature up to 1300 K near the exit ...
Tomoya Wada +2 more
openaire +1 more source
Mild Combustion of Surrogate Liquid Fuels
2010Recently significant efforts have been made in order to obtain high thermal efficiencies in high temperature combustion processes without the adverse effect of, in particular, high NOx emissions caused by high temperature flames [1]. It was found that a massive exhaust gas recirculation coupled with a preheating of the combustion air generates ...
DERUDI, MARCO, ROTA, RENATO
openaire +2 more sources
MILD Combustion: the Future for Lean and Clean Combustion Technology
International Review of Mechanical Engineering (IREME), 2014The future of today's society is greatly depending on the energy development. Due to the depletion of fossil fuel and the gradual development of energy generation from renewable sources, energy security becomes an important intergovernmental issue. This paper discusses the energy needs and the new combustion technology that will aid in achieving lean ...
Noor, M. M. +2 more
openaire +1 more source
Numerical and experimental investigation of a mild combustion burner
Combustion and Flame, 2007Abstract An industrial burner operating in the MILD combustion regime through internal recirculation of exhaust gases has been characterized numerically. To develop a self-sufficient numerical model of the burner, two subroutines are coupled to the CFD solver to model the air preheater section and heat losses from the burner through radiation.
GALLETTI, CHIARA +2 more
openaire +2 more sources
2010
Mild Combustion processes evolve in a temperature and concentration range outside the limit of interest of standard combustion processes, with the aim of lowering the maximum temperature of the whole process below the value at which massive pollutants formation occurs.
Mariarosaria de Joannon +2 more
openaire +3 more sources
Mild Combustion processes evolve in a temperature and concentration range outside the limit of interest of standard combustion processes, with the aim of lowering the maximum temperature of the whole process below the value at which massive pollutants formation occurs.
Mariarosaria de Joannon +2 more
openaire +3 more sources
Combustion Processes in Mild Combustion
2005Mild Combustion is a process completely different both from deflagration, detonation, explosion in a classic form, and also from the processes that generate diffusion flames. Therefore it deserves to be analyzed separately from these processes and quoted with a specific name.
A Cavaliere, M de Joannon
openaire +2 more sources

