Results 61 to 70 of about 2,657,616 (308)

Study of Mechanical and Wear Behaviour of Hyper-Eutectic Al-Si Automotive Alloy Through Fe, Ni and Cr Addition [PDF]

Materials Research, 2018
Effect of Fe, Ni and Cr addition on the wear behavior of hyper-eutectic Al-Si automotive alloy has been studied. Dry sliding wear tests have been conducted using pin-on-disc wear testing machine under normal loads of 20N and constant sliding speed of 0 ...
Mohammad Salim Kaiser, Sakib Hasan Sabbir, Mohammad Syfullah Kabir, Mashiur Rahman Soummo, Maglub Al Nur   +4 more
doaj   +2 more sources

Fully Additive Vertical Organic Electrochemical Transistors on Renewable and Compostable Substrates Enable Ultrasensitive Bioelectronics

Advanced Functional Materials, EarlyView.
Fully additive vertical organic electrochemical transistors (vOECTs) with channel‐length of 226 nm on a 50 µm compostable substrate achieve >106 current modulation and ∼36 mS transconductance. Ion‐selective integration enables 1.1 mA dec−1 sensitivity and 36 µm detection limit, highlighting a scalable platform for sustainable electronics and ...
Giulia Frusconi, Samuele Lavelli, Zsolt M. Kovács‐Vajna, Fabrizio Torricelli   +3 more
wiley   +1 more source

Adhesive wear and particle emission: Numerical approach based on asperity-free formulation of Rabinowicz criterion

Friction, 2018
In 1953 Archard formulated his general law of wear stating that the amount of worn material is proportional to the normal force and the sliding distance, and is inversely proportional to the hardness of the material.
Valentin L. Popov, Roman Pohrt
doaj   +1 more source

Advances in Sustainable and Wearable Textile Based Soft Robotics

Advanced Functional Materials, EarlyView.
This Review examines advances in wearable textile‐based soft robotics, focusing on sustainable materials, integrated sensing, and scalable actuation. It discusses manufacturing and system integration across healthcare, assistive robotics, prosthetics, and human–machine interfaces, and highlights key challenges in circular design, including life‐cycle ...
Zahir Abbas, Marzia Dulal, Sophia K. Novoselov, Victoria K. Novoselov, Kostya S. Novoselov, Shaila Afroj, Nazmul Karim   +6 more
wiley   +1 more source

Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon [PDF]

, 2012
Owing to the capricious wear of cutting tools, ultra precision manufacturing of silicon through single point diamond turning (SPDT) operation becomes a challenging task.
Reuben, Robert L, Goel, Saurav, Luo, Xichun, Pen, Hongmin   +3 more
core   +2 more sources

Biodegradable and Biocompatible Functional Polymers for Biomedical Applications

Advanced Functional Materials, EarlyView.
Biodegradable and biocompatible functional polymers integrate electrical, mechanical, and stimuli‐responsive functionalities while enabling programmed degradation under physiological conditions. This review introduces recent advances in conductive, shape‐memory, self‐healing, photocurable, and adhesive polymer systems, emphasizing material design ...
Won Bae Han, Shuvra Mondal, Sungkeun Han, Chan‐Hwi Eom, Venkata Ramesh Naganaboina, Suk‐Won Hwang   +5 more
wiley   +1 more source

Gradient‐Conductivity Architecture Enables Synchronous Enhancement of Sensitivity and Detection Range in Multifunctional All‐Paper Sensors

Advanced Functional Materials, EarlyView.
A gradient‐engineered all‐paper sensor is fabricated by integrating MXene and in situ grown AgNPs within hierarchical cellulose networks. The device breaks the sensitivity–detection range trade‐off through cascaded conductive pathways, enabling ultrahigh pressure sensitivity, humidity–pressure decoupled dual‐mode sensing, and outstanding EMI shielding,
Ao Li, Jun Xu, Dezhong Xu, Zhaohui Zhang, Jiyi Li, Daxian Cao, Kefu Chen, Mizi Fan   +7 more
wiley   +1 more source

Effects of process parameters and carbon nanotubes content on microstructure and properties of laser cladding composite coatings using Ni-Ti-Cr-carbon nanotubes

Materials Research Express, 2022
The Ni-Ti-Cr-carbon nanotubes (CNTs) composite coatings was successfully fabricated by laser cladding. The optical microscope was used to observe the metallographic structure of the composite coating, the phase composition of the composite layer was ...
Kexin Zhou, Yifu Shen
doaj   +1 more source

Preferential Interfacial Engineering of Hydrogels via Interdigitated Nanoparticle Assembly

Advanced Functional Materials, EarlyView.
Robust surface functionalization of hydrogel surfaces is performed via interdigitated metal nanoparticle assembly, inducing strong affinity with the hydrogel matrix. The partially exposed nanoparticle domains act as interfacial nanobridges that mediate both chemical and physical bonding with diverse materials, including small molecules, fluorous ...
Hyeonjin Kim, Hyeseoung Lim, Ji Min Lee, Heeyeon Kang, Yongkwon Song, Woojae Chang, So‐Jin Park, Jin Yoo, Atsushi Hozumi, Jinhan Cho, Jongkuk Ko, Sanghyuk Wooh   +11 more
wiley   +1 more source

Obstructive sleep apnea: a follow-up program in its relation to temporomandibular joint disorder, sleep bruxism and orofacial pain

BMC Oral Health, 2023
Objective To evaluate the correlation between obstructive sleep apnea (OSA) and temporomandibular joint (TMJ) morphology, tooth wear condition, orofacial pain through a follow-up program.
Ruoyu Ning, Junjie Chen, Yanqin Lu, Jing Guo   +3 more
doaj   +1 more source