Results 141 to 150 of about 207,013 (295)

A Family of Sodium Solid‐State Electrolytes Based on the NaGaxAl1‐xCl4 Solid Solution

Advanced Materials Interfaces, EarlyView.
ABSTRACT Sodium‐based metal chloride solid electrolytes are promising for sodium solid‐state batteries due to their excellent oxidation stability, which, as shown for Li halides, can coexist with high ionic conductivity. To explore cationic substitution effects, we synthesized NaGaxAl1‐xCl4 (0 ≤ x ≤ 1) via ball milling and investigated structural and ...
Hao Guo, Matteo Bianchini
wiley   +1 more source

Reducing Interfacial Separation Force in High‐Speed Constrained‐Surface Projection Stereolithography Using a Dual‐Modulus Silicone Release Film

Advanced Materials Interfaces, EarlyView.
A dual‐modulus silicone release film creates distributed stress concentrations at high‐/low‐modulus boundaries, triggering multi‐site crack initiation and rapid interfacial detachment. The architecture lowers the peak separation force by 97.6%, shortens detachment time, and enables stable continuous projection stereolithography at 720 mm h−1, offering ...
Xiaogang Li, Xiaoqing Kang, Hong Xiao, Yugang Duan   +3 more
wiley   +1 more source

Spontaneous Nanopatterning and Strain Relaxation in SiGe Layers Grown by Oxidative Solid‐Phase Epitaxy

Advanced Materials Interfaces, EarlyView.
Thin SiGe buffer layers are grown by oxidative solid‐phase epitaxy, resulting in a nanopatterning of varying Ge concentration across the surface of the sample. The nanopatterning is caused by a hexagonal network of dislocations on the SiGe/Si(111) interface, and is visible by scanning electron microscopy, providing a non‐destructive method for ...
Sophie E. Bierer, Trevor R. Smith, Arezoo Mafi, Sunzhuoran Wang, Chengqian Liao, Vatsalkumar Patel, Andrew P. Knights, Ryan B. Lewis   +7 more
wiley   +1 more source

Development of a Solid‐Liquid Hybrid Electrolyte Composed of LiTa2PO8 and [C2mim][FSA]–Li[FSA] Ionic Liquid for Rechargeable Lithium Metal Batteries

Advanced Materials Interfaces, EarlyView.
LiTa2PO8 (LTPO) suffers from high interfacial resistance when paired with Li metal due to poor solid‐solid contact. Coating LTPO with an ionic liquid (IL) markedly improves interfacial stability, maintaining favorable resistance up to 2000 cycles. However, contact between IL‐coated LTPO and Li metal induces discoloration of LTPO, which is attributed to
Mizuki Fukuda, Dorian Unbehauer, Koichi Hamamoto, Akihito Imanishi, Yuwei Liu, Tetsuya Tsuda   +5 more
wiley   +1 more source

Sulfonate‐Functionalized Boron Nitride Interfacial Layers for Long‐Life Zinc Metal Anodes

Advanced Materials Interfaces, EarlyView.
A multifunctional SDBS‐modified boron nitride nanosheet (SDBS–BNNS) interphase regulates Zn2+ transport and stabilizes the Zn/electrolyte interface in aqueous zinc batteries. Exposed sulfonate groups provide affinity for Zn2+, while the BNNS framework serves as a mechanically robust, water‐blocking barrier, homogenizing interfacial Zn2+ flux and ...
Ingyu Choi, Minseo Kim, Ki‐Min Roh, Sung Ho Song, Seulgi Kim, Dongju Lee   +5 more
wiley   +1 more source

Model of End Milling Force Based on Undeformed Chip Surface with NURBS in Peripheral Milling

, 2010
A new cutting force model for peripheral milling is presented based-on a developed algorithm for instantaneous undeformed chip surface with NURBS. To decrease the number of the differential element, the contact cutting edges of end-milling cutter with ...
Pu XY(普雄鹰), Zhao JB(赵吉宾), Liu WJ(刘伟军)   +2 more
core  

Wood‐Derived Nanocellulose‐Biocarbon Fresnel‐Zone Plate Lenses for Sub‐THz Frequency Applications

Advanced Materials Technologies, EarlyView.
Wood‐derived nanocellulose and lignin‐based biocarbon were combined to fabricate fully bio‐based Fresnel zone plate (FZP) lenses for sub‐terahertz frequencies. These sustainable FZP lenses exhibit low dielectric loss and high directivity, achieving performance comparable to that of metallic references, and remain functional under environmental stress ...
Riikka Haataja, Mikko Kokkonen, Niina Halonen, Sami Myllymäki, Umair Rafique, Mandeep Singh, Ossi Laitinen, Heli Jantunen, Kristiina Oksman, Henrikki Liimatainen   +9 more
wiley   +1 more source

Programmable Crack Networks for Wide‐Range and Reversible Strain Sensing in Vertically Oriented van der Waals Molybdenum Disulfide Thin Films

Advanced Materials Technologies, EarlyView.
Vertically oriented van der Waals MoS2 thin films enable a mechanically programmable crack network for strain sensing. The initial mechanical programming protocol establishes a programmed crack configuration along weak interlayer and interdomain interfaces.
Yinli Wang, Hiroyuki Hirakata
wiley   +1 more source

In‐House Manufacturing of 3D ECM Culture Chips via Vacuum Thermoforming for Enhanced Imaging Applications

Advanced Materials Technologies, EarlyView.
Desktop vacuum thermoforming enables rapid, low‐cost fabrication of 96‐channel polystyrene culture chips with very thin imaging interfaces. The resulting platform supports cell lines, primary cells, and patient‐derived organoids, and enables high‐resolution confocal microscopy and single‐cell visualization, providing an accessible approach for advanced
Aleksandra Fomina, Adam Tam, Jennifer Lam, Nila C. Wu, Nancy T. Li, Alison P. McGuigan   +5 more
wiley   +1 more source

Two‐Step Thermal Upcycling of Flexible Printed Circuit Board Waste Into Metallic Copper Nanoparticles: Synthesis and Characterization

Advanced Materials Technologies, EarlyView.
A two‐step thermal upcycling process converts flexible printed circuit board waste into high‐purity copper nanoparticles using polymer degradation and arc discharge. The synthesized nanoparticles exhibit controlled morphology and high metal purity.
Bikesh S. Ghinangju, Rumana Hossain, Veena Sahajwalla   +2 more
wiley   +1 more source