Results 1 to 10 of about 108,792 (260)
Research on the Hydrodynamic Noise Characteristics of a Mixed-Flow Pump
This study presents a comprehensive investigation of the internal noise characteristics of a mixed-flow pump by combining computational fluid dynamics (CFD) and computational acoustics. The turbulent flow field of the pump is simulated using the unsteady
Leilei Ji, Weidong Shi
exaly +3 more sources
Dynamic Characteristics of Rotating Stall in Mixed Flow Pump [PDF]
Rotating stall, a phenomenon that causes flow instabilities and pressure hysteresis by propagating at some fraction of the impeller rotational speed, can occur in centrifugal impellers, mixed impellers, radial diffusers, or axial diffusers. Despite considerable efforts devoted to the study of rotating stall in pumps, the mechanics of this phenomenon ...
Xiaojun Li +4 more
openaire +3 more sources
Large-Eddy Simulation of Unsteady Flow in a Mixed-Flow Pump [PDF]
This article describes the large‐eddy simulation (LES) of the internal flows of a high–specific‐speed, mixed‐flow pump at low flow‐rate ratios over which measured head‐flow characteristics exhibit weak instability. In order to deal with a moving boundary interface in the flow field, a form of the finite‐element method in which overset grids are applied
Chisachi Kato +2 more
doaj +4 more sources
The energy performance and radial force of a mixed flow pump with symmetrical and unsymmetrical tip clearance are investigated in this paper. As the tip clearance increases, the pump head and efficiency both decrease.
Lei Tan, Yabin Liu, Baoshan Zhu
exaly +3 more sources
CFD Analysis of Cavitation Phenomena in Mixed-Flow Pump [PDF]
This paper deals with the CFD analysis of cavitating flow in the mixed-flow pump with the specific speed of 1.64 which suffers from a high level of noise and vibrations close to the optimal flow coefficient. The ANSYS CFX package has been used to solve URANS equations together with the Rayleigh-Plesset model and the SST-SAS turbulence model has been ...
Milan Sedlar +2 more
exaly +2 more sources
Influence of Bionic Waveform Leading Edge Blade on Drag Reduction Characteristics of Mixed Pump [PDF]
Because the helical axial flow gas-liquid mixing pump has the great advantage of conveying gas-liquid two-phase mixed medium, it has become the main core equipment for deep-sea oil and natural gas exploitation.
W. Han +6 more
doaj +1 more source
In this article, a typical mixed-flow pump was adopted as the research object to investigate the influence of the inlet structure within the impeller on the performance and internal flow patterns of the mixed-flow pump. First, three different blade inlet
Zhenggang Huo, Xiaoting Zha
doaj +1 more source
The Influence of a Pumping Chamber on Hydraulic Losses in a Mixed-Flow Pump [PDF]
In this study, entropy generation theory based on computational fluid dynamics (CFD) is used to study the influence of a pumping chamber type (guide vane and volute scheme) on the spatial distribution of hydraulic loss in a mixed-flow pump. The CFD data of the mixed-flow pump with a volute is validated by external characteristic test data under Q = 561.
Zhang, Huiyan +4 more
openaire +1 more source
Research on configuration and performance of water ramjet pressurized water intake system
Water ramjet is the most ideal power propulsion device for high-speed underwater weapons. However, failure to start it at low-speed makes it hard for the engine to be widely used.
YANG Hao +5 more
doaj +1 more source
A cavitation performance prediction method for pumps: Part2-sensitivity and accuracy
At present, in the case of pump fast optimization, there is a problem of rapid, accurate and effective prediction of cavitation performance. In “A Cavitation Performance Prediction Method for Pumps PART1 -Proposal and Feasibility” [1], a new cavitation ...
Long Yun +4 more
doaj +1 more source

