Results 151 to 160 of about 3,985,486 (233)

Combined Effects of Thermal Cycling Aging and Reinforcement Content on the Ball‐On‐Disk Wear of Additively Manufactured Polylactic Acid Composites

Polymer Composites, EarlyView.
Thermal Aging and Tribological Tests of Additive Manufactured PLA Composites. ABSTRACT This study focuses on the additive manufacturing of pure polylactic acid (PLA) specimens and milled glass fiber (GF)‐filled PLA composites under thermal cycling aging and wear tests. Wear tracks have been analyzed via 3D optical profiling and SEM imaging.
Sinan Fidan, Satılmış Ürgün, Nevin Gamze Karsli, Taner Yilmaz, Mustafa Özgür Bora, Mehmet İskender Özsoy   +5 more
wiley   +1 more source

Filtering dynamics of an interference comb filter in a ytterbium-doped mode-locked fiber laser. [PDF]

Sci Rep
Xu H, Zhang L, Yao Y, Wang M, Liu Y, Li X, Li J, Nie Z, Li X.   +8 more
europepmc   +1 more source

Wear‐Activated Surface Engineering of Thermoplastic Polyurethane/Graphene Nanoplatelet Nanocomposites for Ice Friction Control

Polymer Composites, EarlyView.
Wear‐activated surface engineering of TPU/GNP nanocomposites through improved filler dispersion and interfacial anchoring of functionalized graphene nanoplatelets, leading to finer post‐abrasion textures and enhanced ice traction. ABSTRACT Graphene‐reinforced thermoplastic polyurethane (TPU) composites offer a promising route for developing ...
Sara Zahmatkesh, Siu‐Ning Leung, Reza Rizvi   +2 more
wiley   +1 more source

Wavelength-Switchable Ytterbium-Doped Mode-Locked Fiber Laser Based on a Vernier Effect Filter. [PDF]

Micromachines (Basel)
Xu H, Zhang L, Li X, Li J, Liu Y, Yao Y, Wang M.   +6 more
europepmc   +1 more source

Photovoltaic Effect in a III‐IV‐V Compound Semiconductor

Progress in Photovoltaics: Research and Applications, EarlyView.
A large reduction of the GaAs band gap is obtained with incorporation of 6.5% Ge during epitaxy without introducing extended defects or composition inhomogeneity. Heterojunction solar cell devices were fabricated with 0.76‐V open circuit voltage and an internal quantum efficiency above 40% at energies below the bandgap of the GaAs emitter.
José M. Ripalda, Pablo Caño, Micaela Rodriguez‐Peña, Miguel Angel Sevillano‐Bendezú, Aurelia Trevisan, Raghavendra Juluri, Aitana Cano, Iván García, Alicia Gonzalo, Enrique Navarro, Jeronimo Buencuerpo, Paul Koenraad, Ana María Sanchez, Yolanda Gonzalez   +13 more
wiley   +1 more source

A High-Energy, Wide-Spectrum, Spatiotemporal Mode-Locked Fiber Laser. [PDF]

Micromachines (Basel)
Ge B, Lou Y, Guo S, Cai Y, Zhang X.
europepmc   +1 more source

In Situ Curing‐Enabled 3D Printing of Continuous Fiber‐Reinforced Thermosetting Composites

Journal of Polymer Science, EarlyView.
In situ curing‐enabled the 3D printing of continuous fiber/thermoset composites, which were reviewed. Particularly, four types of in situ curing, were discussed, including Radiation‐induced curing, photothermal curing, electrothermal curing, and frontal polymerization. AI‐integrated printing was also analyzed.
Xiaofei Wu, Harrison Hayworth, Shiren Wang   +2 more
wiley   +1 more source

Dissimilar soliton molecule formed by dissipative pulses in a single-mode mode-locked fiber laser. [PDF]

Opt Express
Xu S, Viry A, Sander MY.
europepmc   +1 more source

Stair‐Climbing Wheelchairs for Enhanced Mobility: A Comprehensive Review of Fundamental Mechanisms, Design Concepts, and Performance Analysis

Journal of Field Robotics, EarlyView.
ABSTRACT People with physical disabilities face significant mobility challenges while climbing uneven surfaces and staircases. In these circumstances, traditional wheelchairs do not provide stable, safely controlled mobility, underscoring the importance of building superior stair‐climbing wheelchairs for both medical and infrastructure purposes.
Gopisetti Manikanta, S. M. Abhinandan, Anand Reddy, G. Chandana, Divya, P. Anil Kumar, Ch. Venkata Rao, Ashish Garg, Ravi C. Soni, Jogendra Kumar, Bhargav Akkinepally   +10 more
wiley   +1 more source

Construction optimization and functional applications of fluorescent nanodiamonds

Responsive Materials, EarlyView.
This review summarizes synthesis, surface modification and optical properties of fluorescent nanodiamonds. Their advances in quantum sensing, single‐photon emission and biomedicine are discussed, and existing challenges and future directions are presented.
Yunpeng Yang, Sen Zhang, Chao Chen, Wensi Yang, Zuanquan Chen, Rui Fan, Linlin Liu, Benjian Liu, Kang Liu, Zhibo Zhang, Bing Dai, Jiaqi Zhu   +11 more
wiley   +1 more source