Results 81 to 90 of about 5,905 (222)
The Stress Relaxation Of Modified Bitumens
International Journal on Pavement Engineering & Asphalt Technology, 2015 Abstract The Asphalt pavements in Central and Eastern Europe have to be resistant to high and very low temperatures and climatic changes. Especially emphasize influence of low temperatures seems to be critical parameter. That is why the modified bitumens with low temperature susceptibility and with high resistance to low temperature cracking are ...
Pavel Coufalík +4 more
openaire +1 more source
Evaluation of the fatigue macro-cracking behavior of crumb rubber modified bituminous mixes
Materiales de Construccion, 2014 The use of crumb rubber modified bitumen (CRMB) in asphalt mixes is a road engineering technology that has become increasingly important in recent years.
F. Moreno-Navarro +4 more
doaj +1 more source
Characteristics of two-component epoxy modified bitumen
, 2010 Coal tar bearing emulsions were used in the Netherlands as binder in anti-skid surfaces for runways because of their perfect adhesion and fuel resistance properties. They are however toxic and will not be allowed anymore after 2010.
Zandvoort, F. +14 more
core +1 more source
Journal of Analytical Methods in Chemistry, 2016 Over the recent years, bitumen modification with polymers, acids, or mineral fillers has gained relevance to adjust its performance properties. This work reports the use of polyphosphoric acid (PPA) for the modification of formulated bitumen.
Catarina Varanda +4 more
doaj +1 more source
CHARACTERISATION OF POLYMER MODIFIED BITUMEN
INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT, 2023 This study focuses on characterizing Polymer Modified Bitumen (PMB) using Ethyl Vinyl Acetate (EVA) as the modifier. The objective of the research is to investigate the effects of EVA modification on the properties of bitumen, including penetration, softening point, ductility, and specific gravity.
openaire +1 more source
Fatigue and Rutting Performance of FAA and Conventional Asphalt Mixture Systems
Fatigue &Fracture of Engineering Materials &Structures, Volume 49, Issue 8, Page 3500-3511, August 2026.ABSTRACT This study evaluates the laboratory fatigue and rutting performance of two specification‐compliant asphalt mixture systems: an FAA‐compliant airfield mixture designed according to FAA AC 150/5370‐10H and a conventional highway mixture designed according to the Turkish General Directorate of Highways requirements.
Yalcin Karakaya, Murat Guler
wiley +1 more source
POLYMER MODIFIED ASPHALT NANOCOMPOSITES
, 2011 Asphalt one of the versatile materials of antique, inspite of its compositional variations and complexities, widely employed in various applications like water proofing, paving etc. Due to the complex physical and chemical nature, Asphalt seldom performs
MARKANDAY SUBRAMANIAN, SURESHKUMAR
core
The Influence of Crumb Rubber on Modified Bitumen Properties
, 2017 Rubber derived from grinding of recycled cars and trucks tyres may be successfully used as a bitumen modifier. Number of researches reported sufficient characteristics of rubber modified asphalt binders or modified asphalt mixes in terms of improved ...
Audrius Vaitkus +3 more
core +1 more source
Study of the zero shear viscosity of SBS copolymer modified bitumens
Budownictwo i Architektura, 2014 The paper presents the results of the zero shear viscosity (ZSV) determined by using a dynamic shear rheometer (DSR). The tests were conducted with the use of 50/70 penetration grade bitumen produced from Venezuelan and Russian crude oils (named V50/70 ...
Mieczysław Słowik, Marta Andrzejczak
doaj +1 more source
Properties of bitumen modified with latex
IOP Conference Series: Materials Science and Engineering, 2019 Abstract A lot of effort has been made to improve the base bitumen properties by adding different types of modifier. The current issue of pavement failure has raised a concern that high specification of bitumen is essential to counter the asphalt pavement challenges.
N. H. Daniel +7 more
openaire +1 more source