Results 21 to 30 of about 1,667,500 (133)
Effect of blending of medium-temperature phase change material on the bitumen storage heat
Heliyon, 2023 This study aims to investigate the feasibility of using D-Mannitol as a phase-change material (PCM) to increase the energy storage capacity and improve the thermomechanical characteristics of the modified bitumen.
Loubna Najemi +2 more
doaj +1 more source
Deformation behaviour of bitumen and bituminous mixes [PDF]
, 2005 The main goal of this dissertation is to develop simple and accurate models for the transient monotonic and cyclic deformation behaviour of bitumen and asphalt mixes.
Ossa, Edgar Alexander
core +2 more sources
High-Temperature Performance Enhancement of Bitumen by Waste PET-Derived Polyurethane
Advances in Materials Science and Engineering, 2022 Bitumen performance enhancement through modification by reactive polymers gained significant attention in the road construction industry. Polymeric bitumen additives, such as polyurethane, improve bitumen properties at low and high in-service ...
Desalegn A. Mersha +1 more
doaj +1 more source
Applied Sciences, 2023 Recently, bitumen pavements have been widely used for road paving. Various scholars have used modified bitumen in road paving to improve pavement performance, thus increasing the service life.
Ruixia Li +3 more
doaj +1 more source
The Rationale for the Use of Modified Bitumen Coated Overburden Rocks for Haul Roads of Coal Mines [PDF]
E3S Web of Conferences, 2019 Kuzbass is a leader in the field of mining of coal as one of the main materials for industry and civilian use. Its production rate its is constantly increasing, which can not but affect the problem of using secondary material (in particular, rocks that ...
Ivanov Sergey, Martel Nikita
doaj +1 more source
Acta Technica Jaurinensis, 2023 Reclaimed asphalt pavement (RAP) is gained from road reconstructions; however, its usage is less optimised in Hungary and neighbouring regions, since on the project level the proportion of RAP in the asphalt mixes is only 10-15%.
Csaba Toth, Laszlo Petho, Szabolcs Rosta
doaj +1 more source
, 2023 Plastic addition to bitumen increases the stiffness of the binder, reduces its workability due to the increase in viscosity, and causes storage stability issues. Thus, plastic pre-treatment methods are needed.
Vargas, Camilo +3 more
core +1 more source
Investigating the rheological properties and compatibility behaviours of RET/PE and WR/CR/SBS compound-modified bitumen [PDF]
, 2023 Two types of elastomer/plastic compound-modified bitumen were developed by means of incorporating the reactive elastomeric terpolymer (RET) into the plastic (high-density polyethylene HDPE or recycled polyethylene RPE) modified bitumen and adding the wax
Liu, X +17 more
core +2 more sources
Performance Investigation of Modified Bitumen With Ethylene-Vinyl Acetate Polymer and Rubber Powder by Performing Classical and Superpave Tests [PDF]
پژوهشهای زیرساختهای عمرانی, 2021 In this study, ethylene vinyl acetate (EVA) polymer and rubber powder were used as 85/100 bitumen modifiers. First, classical bitumen tests including penetration grade and softening point were performed on the samples and improvement of bitumen base ...
Behrooz Damyar +2 more
doaj +1 more source
Ts. Dr. Khairil Azman produces NanoPearm to increase bitumen capacity for road pavement [PDF]
, 2021 GAMBANG, 6 May 2021 - A Kuching-born lecturer, Ts. Dr. Khairil Azman Masri, 33, has produced Nanopearm - Nanosilica Modified Asphalt Binder, which is a product based on nanomaterials and bitumen to increase the capacity and durability of ...
Safriza, Baharuddin +1 more
core +1 more source