Results 51 to 60 of about 8,779,886 (295)

Moisture Management of Polyester/Micro-modal Fabric and Its Moisturizing Effect

Textile Science and Engineering, 2013
Polyester/polypropylene (PP) and polyester/micro-modal (PMM) fabrics with double structures were prepared by subtracting loops on the skin side and face side, respectively. The moisture management properties of the PP and PMM fabrics were characterized using a moisture management tester (MMT), after which the properties were compared with those of ...
Gwang Wung Yang, Sung Yeon Hong, Han Yong Jeon   +2 more
openaire   +1 more source

Zein‐Based Adhesives: Sustainable Extraction and Application in Bioadhesive Technologies

Advanced Engineering Materials, EarlyView.
Zein is extracted from corn gluten meal using a simple and scalable process with high yield (~90%). The resulting protein is applied in bioadhesives modified with Ca2+ and Fe3+ ions, exhibiting substrate‐dependent adhesion. The findings demonstrate competitive bonding performance and highlight the role of ionic interactions in tuning adhesion ...
Paula Bertolino Sanvezzo, Daniela Winsley Valereto Friozi, Vinícius de Oliveira, Marcia Cristina Branciforti   +3 more
wiley   +1 more source

Two-layer fabrics for moisture management

Research Journal of Textile and Apparel, 2020
Purpose Woven fabrics have been popularised in use owing to their superior properties and functionality. Today, weavers strive to add value to their product to be competitive and to secure profit in performance fabrics such as technical fabrics, smart fabrics and sportswear fabrics.
Niles, Nilhan, Fernando, Sandun, Rathnayake, Nipuni, Hewamalavi, Ayesha, Weerasinghe, Samudika   +4 more
openaire   +1 more source

Handbook of Establishing and Maintaining Oxygen‐Free Atmospheres

Advanced Engineering Materials, EarlyView.
This study presents a practical framework for creating oxygen‐free atmospheres at ambient pressure using silane‐doped inert gases. The results show that ultra‐low oxygen levels and strongly reduced water content can be achieved through controlled silane dosing, drying systems, and sensor monitoring.
Sascha Jan Zimmermann, René Gustus, Lienhard Wegewitz, Wolfgang Maus‐Friedrichs   +3 more
wiley   +1 more source

Additive Gaussian Process Regression for Predictive Design of High‐Performance, Printable Silicones

Advanced Engineering Materials, EarlyView.
A chemistry‐aware design framework for tuning printable polydimethylsiloxane (PDMS) for vat photopolymerization (VPP) is developed using additive Gaussian process (GP) modeling. Polymer network mechanics informs variable groupings, feasible formulation constraints, and interaction variables.
Roxana Carbonell, Martha Leach, Hongtao Song, Carolyn Seepersad   +3 more
wiley   +1 more source

The Effect of Softeners Applications on Moisture Management Properties of Polyester/Cotton Blended Sandwich Weft-Knitted Fabric Structure

Coatings, 2021
Prolonged drying times of terry fabrics is a problem as they can not be re-used until completely dry. To resolve this issue, we have designed a sandwich polyester in the mid-layer with low moisture content that could reduce the drying time with excellent
Amna Siddique, Tufail Hassan, Sharjeel Abid, M. Ashraf, A. Hussain, Faizan Shafiq, M. Khan, I. Kim   +7 more
semanticscholar   +1 more source

Tailored Hierarchical Porous Copper Architectures via Three Dimensional Printing and Pressure‐less Sintering for Next‐Generation Lithium‐Metal Batteries

Advanced Engineering Materials, EarlyView.
A hierarchical porous copper current collector is fabricated via three‐dimensional printing combined with pressureless sintering to stabilize lithium metal anodes. The interconnected architecture lowers local current density, guides uniform Li deposition within pores, and suppresses dendrite growth.
Alok Kumar Mishra, Mukul Shukla
wiley   +1 more source

Al–Cu Composite Casting of Laser‐Deoxidized Copper: Bonding, Interfacial Chemistry, and Thermal Conductivity

Advanced Engineering Materials, EarlyView.
This study investigates laser‐based oxide removal of Cu inserts in oxygen‐free conditions and examines long‐term oxidation kinetics and surface chemistry under different atmospheres via X‐ray photoelectron spectroscopy. Al–Cu compound casting with differently oxidized surfaces is performed, and intermetallic phase formation, morphology, and thermal ...
Timon Steinhoff, Finn‐Lennard Janthur, Sascha Zimmermann, Sarah Seffer, Jörg Hermsdorf, René Gustus, Ludger Overmeyer, Wolfgang Maus‐Friedrichs, Hans Jürgen Maier, Christian Klose   +9 more
wiley   +1 more source

Moisture and Surface Properties of Radically Photo-Grafted Poly-(Ethylene Terephthalate) Woven Fabric

Fibers
This study aims at the modification of the surface properties of twill-5 polyethylene terephthalate (PET) fabric, in particular to improve its hydrophilicity. It compares the hydrophilic potential and efficacy of two vinyl monomers radically grafted onto
Roberta Bongiovanni, Jinping Guan, Ada Ferri, Alessandra Vitale   +3 more
doaj   +1 more source

Additive Manufacturing of Continuous Fibre Reinforced Composites: Process, Characterisation, Modelling, and Sustainability

Advanced Engineering Materials, EarlyView.
Additive manufacturing provides precise control over the placement of continuous fibres within polymer matrices, enabling customised mechanical performance in composite components. This article explores processing strategies, mechanical testing, and modelling approaches for additive manufactured continuous fibre‐reinforced composites.
Cherian Thomas, Amir Hosein Sakhaei
wiley   +1 more source