Results 71 to 80 of about 22,482 (311)
Effect of 135Xe and 135Xem Migration on Reactivity in Molten Salt Reactor
Yuanzineng kexue jishu, 2022 Fissile material dissolved in the molten salt is employed in molten salt reactor(MSR), which circulates through the primary loop. Considering the flow characteristic of fuel in MSR, the neutron poison calculation model such as Xe is different from ...
WU Chen;YU Chenggang;CAI Xiangzhou;CHEN Jingen
doaj
Electrochemical behaviour of thorium(IV) in molten LiF–CaF2 medium on inert and reactive electrodes [PDF]
, 2010 The electrochemicalbehaviour of the Th(IV)/Th system was examined in moltenLiF–CaF2medium on inert (molybdenum), reactive (nickel) and liquid (bismuth) electrodes in the 810–920 °C temperature range by several electrochemical techniques.
Cassayre, Laurent +3 more
core +2 more sources
Advanced Energy Materials, EarlyView.Lithium‐ion batteries are ubiquitous but pose significant safety risks especially with high‐energy‐density electrode materials. This study reports a nanocomposite gel electrolyte (NGE) with a flame‐retardant magnesium hydroxide (MH) matrix, which offers robust mechanical properties, high ionic conductivity, and enhanced thermal safety.
Cory M. Thomas +5 more
wiley +1 more source
Fast Spectrum Molten Salt Reactor Options [PDF]
, 2011 During 2010, fast-spectrum molten-salt reactors (FS-MSRs) were selected as a transformational reactor concept for light-water reactor (LWR)-derived heavy actinide disposition by the Department of Energy-Nuclear Energy Advanced Reactor Concepts (ARC) program and were the subject of a preliminary scoping investigation.
Gehin, Jess C +5 more
openaire +2 more sources
Advanced Energy and Sustainability Research, EarlyView.Hydrogen‐powered aviation offers a transformative pathway to zero‐emission flight by eliminating in‐flight CO2 emissions. Key considerations include propulsion systems (fuel cells and hydrogen combustion), cryogenic storage and insulation challenges, infrastructure and cost barriers, and supply‐chain constraints.
Mubasshira +4 more
wiley +1 more source
Characterisation of molten salts for their application to Molten Salt Reactors
PAM Review Energy Science & Technology, 2019 Molten Salt Reactors (MSRs) are one of the six Gen (IV) reactor designs chosen by the Generation IV International Forum for further development. A key area of concern for MSRs is the selection of molten salt composition. Parameters such as heat capacity, thermal conductivity, and viscosity are essential to consider when selecting a salt mixture for use
Jake Barnes +3 more
openaire +2 more sources
Investigation of electrorefining of metallic alloy fuel onto solid Al cathodes [PDF]
, 2007 This work concerned the electrorefining of UZr and UPuZr alloys on a solid aluminium cathode, in the LiCl-KCl eutectic melt containing U3+, Pu3+, Np3+, Zr2+ or Zr 4+, Am3+, Nd3+, Y3+, Ce3+ and Gd3+ chlorides. During constant current electrolyses, the use
Cassayre, Laurent +6 more
core +1 more source
Copper Contact for Perovskite Solar Cells: Properties, Interfaces, and Scalable Integration
Advanced Energy and Sustainability Research, EarlyView.Copper electrodes, as low‐cost, scalable contacts for perovskite solar cells, offer several advantages over precious metals such as Au and Ag, including performance, cost, deposition methods, and interfacial engineering. Copper (Cu) electrodes are increasingly considered practical, sustainable alternatives to noble‐metal contacts in perovskite solar ...
Shuwei Cao +4 more
wiley +1 more source
INTERNALLY COOLED MOLTEN-SALT REACTORS [PDF]
, 1959 The initial and long-term nuclear characteristics of two internally cooled heteroingeneous graphite-moderated two-region molten-salt reactors were studied. The reactors have doubling times of 22.5 and 27.5 years. Methods of decreasing the doubling times by removing the Pa/sup 233/ from the core and by increasing the specific power of the reactor are ...
openaire +2 more sources
AIChE Journal, EarlyView.Abstract A model‐guided core–shell catalyst design is presented for methanol synthesis, featuring a phase change material (PCM) core encapsulated by a Cu–Zn–Al2$$ {}_2 $$O3$$ {}_3 $$ (CZA) catalytic shell. The PCM enables in situ thermal management by absorbing reaction heat at its melting point, mitigates the kinetic decline at high temperatures and ...
Canan Karakaya, Tugba Turnaoglu
wiley +1 more source