Results 1 to 10 of about 646 (163)
On the effect of drag forces in mooring system restoring forces [PDF]
Mooring line is a major source of stability and plays a key role in the global response of offshore floating wind turbine. In the current state of the research, a formulation based on the analytical catenary equation is most commonly used for the ...
Ullah Zahid +3 more
doaj +2 more sources
The paper aims at investigating the interactions between a floating wave energy device (WEC) and its mooring system under a variety of wave conditions (regular and irregular, perpendicular and oblique, ordinary and extreme). The analyzed WEC is the DEXA,
Luca Martinelli, Barbara Zanuttigh
doaj +3 more sources
Peak mooring forces in the horizontal interlaced multi-layered moored floating pipe breakwater
Present study aims to investigate the influence of relative breakwater width W/L (W=width of breakwater, L=wavelength), wave steepness Hi/gT2 (Hi=incident wave height, T=wave period) and relative wave height d/W (d=water depth) on forces in the moorings ...
Vishwanath Mane +3 more
doaj +3 more sources
Numerical Study on the Mooring Force in an Offshore Fish Cage Array
The mooring force in a fish cage array subjected to currents and waves is investigated using the finite element method. Firstly, the numerical model of a fish cage array with six gravity cages is built by Ansys/APDL.
Zhongchi Liu +2 more
doaj +1 more source
Stability Assessment of the Flexible System using Redundancy [PDF]
In this study, dynamic behavior of a mooring line in a floating system is analyzed by probability approaches. In dynamics, most researches have shown the system model and environments by mathematical expression.
Yonghui Park
doaj +1 more source
The size of container vessels is continuously growing, always exceeding expectations. Port authorities and terminals need to constantly adapt and face challenges related to maritime infrastructure, equipment, and operations, as these are the principal ...
Sara Sanz Sáenz +3 more
doaj +1 more source
Estimation of the Mooring Force
In the first report, outline of the basic designing of the single point mooring systems (SPM) was explained. And it was pointed out that the dynamic stability analysis can be applied practically to the primary planning of SPMs. Slow oscillation or weather vane motion of a moored ship sometimes causes excessive mooring force and whether the oscillation ...
Jun Obokata, Toshio Nakajima
openaire +3 more sources
A ship’s automatic mooring system relies on vacuum suction pads with rubber seals to withstand external loads, such as mooring forces. This paper focused on the design requirements and performance testing of vacuum suction pads to develop a high ...
Jaehyeon Ahn +6 more
doaj +1 more source
Mooring Drag Effects in Interaction Problems of Waves and Moored Underwater Floating Structures
In contrast to either considering structures with full degrees of freedom but with wave force on mooring lines neglected or with wave scattering and radiation neglected, in this paper, a new analytic solution is presented for wave interaction with moored
Cheng-Tsung Chen +2 more
doaj +1 more source
The conventional mooring positioning technique is cost-effective; however, it shows poor maneuverability and positioning precision. In this study, to calculate the mooring tension, mooring cables were discretized into lumped mass models using the lumped ...
Dapeng Zhang +3 more
doaj +1 more source

