Results 11 to 20 of about 9,594 (227)
Fused mullite is used in refractories and as an abrasive due to its suitable properties. Mullite is formed over a wide range in the Al2O3–SiO2 phase system, preferably as 3:2 or 2:1 mullite.
D. Mühmer +3 more
doaj +2 more sources
Mullite-2c – a natural polytype of mullite
A single crystal (∼ 20 µm × 20 µm × 330 µm) of mullite-2c, a natural polytype of mullite, was separated from a radially grown cluster of acicular crystals from Ettringer Bellerberg (Quarternary Eifel volcanic fields, Germany).
Lenz, Stephan +4 more
openaire +4 more sources
Study on synthesizing mullite with bauxite tailing
To enhance the efficient utilization of bauxite tailings,the mullite was synthesized by bauxite tailings in molybdenum wire furnace at 1 550℃ and 1 650℃ for 4 h.The sintered samples were analyzed by X-ray diffraction(XRD),scanning electron microscopy(SEM)
Liu Dongfang +5 more
doaj +1 more source
Light-Absorbing-Layer-Free Flash Lamp Annealing for High-Throughput Fabrication of All-Solution-Processed Oxide Electronics. [PDF]
A flash lamp annealing strategy using a mullite chuck enables rapid conversion of sol–gels to metal oxides on silicon and ultra‐thin glass without extra light‐absorbing layers. Direct light absorption initiates the transformation, and the low thermal conductivity of mullite promotes heat accumulation.
Li Z +5 more
europepmc +2 more sources
Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia [PDF]
The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition
M. A. Aswad +2 more
doaj +2 more sources
Preparation of hollow fiber membranes from mullite particles with aid of sintering additives
Porous mullite hollow fiber membranes were prepared with a combined phase-inversion and sintering method, using three sintering additives including yttrium stabilized zirconia (YSZ), small mullite particles (SMP), and titanium oxide (TiO2) to promote the
Hua Liu +5 more
doaj +1 more source
A novel strategy is proposed to design an exclusive nanostructured mullite spherical feedstock for environmental barrier coatings (EBCs) via atmosphere plasma spraying (APS).
Fei Xiao +7 more
doaj +1 more source
Preparation of mullite whiskers reinforced SiC/Al2O3 composites by microwave sintering [PDF]
Mullite whiskers reinforced SiC/Al2O3 composites were prepared by microwave sintering in a microwave chamber with TE666 resonant mode. Original SiC particles were coated with SiO2 using sol-gel processing and mixed with Al2O3 particles.
Wei Li +4 more
doaj +1 more source
Ceramic cores provide complex internal cavity structures in the investment precision castings of hollow blades for aero-engine. The silica/mullite ceramic cores were fabricated by hot injection molding, adding fused mullite powders with different ...
WU Xiaofei +5 more
doaj +1 more source
Cobalt incorporation in mullite [PDF]
Mullite (nominally 3Al_2O_3.2SiO_2) is technologically important material for advanced ceramics applications. Depending on the synthesis procedure, mullite is able to incorporate considerable amounts of transition metal cations [1]. While Cr^3+, Fe^3+ and V^3+ have the strongest tendency of incorporation in mulllite, only low or very low amounts of Fe ...
Kurajica, Stanislav +3 more
openaire +3 more sources

