Results 101 to 110 of about 78,044 (266)
Advanced Materials Interfaces, EarlyView.Ultrathin MXene/EMF composite foams achieve a specific shielding efficiency of 749.6 dB.dB·cm3$\mathrm{dB}\cdot {\mathrm{cm}}^{3}$/g, while the silver‐enhanced MXene/Ag/EMF reaches 81.4 dB shielding effectiveness at just 1.0 mm thickness. Both composites exhibit rapid Joule heating, retain stability up to 250∘C$^\circ{\rm C}$, and withstand 1000 ...
Abdullah A. Mahmood +7 more
wiley +1 more source
Progress on the Failure Mechanisms and Optimization Strategies on Lithium Iron Phosphate
Advanced Materials Interfaces, EarlyView.This review centers on LiFeO4 cathodes, outlining their core advantages and performance limitations, then systematically elucidating failure mechanisms, proposing key optimization strategies, and summarizing future research directions that integrate advanced characterization with intelligent design.
Zheng‐Xin Qian +8 more
wiley +1 more source
Advanced Materials Interfaces, EarlyView.Nonwoven textile architectures are emerging as versatile platforms for next‐generation energy storage, demonstrating how tailored materials and fabrication strategies enhance ion transport, conductivity, flexibility, and scalability for high‐performance sustainable devices.
Tarikul Islam +6 more
wiley +1 more source
Bandgap‐Dependent Band‐to‐Band Tunneling in Carbon Nanotube Transistors
Advanced Materials Interfaces, EarlyView.We systematically investigate bandgap‐dependent BTBT in SWCNT transistors by comparing wide‐bandgap (6,5) (Eg≈1.13 eV), medium‐bandgap HiPco, and narrow‐bandgap Arc‐discharge (Eg≈0.59 eV) SWCNT networks. The narrow‐bandgap networks show stronger BTBT, higher off‐state leakage, and lower on/off ratio, while wide‐bandgap (6,5) devices suppress BTBT and ...
Yuxiang Wei +10 more
wiley +1 more source
Fabrication of TiN/TiO2 Nanotube‐Based Heterostructure for Hydrogen Sensing Applications
Advanced Materials Interfaces, EarlyView.A hydrogen sensor based on titanium dioxide nanotubes coated with titanium nitride has been developed. The coating process causes a mixed titanium oxynitride layer to form, which improves the sensor performance. Sensor response R depends on the TiN thickness and is not degraded after 7 days in air.
Esme Isik +4 more
wiley +1 more source
Advanced Materials Interfaces, EarlyView.A cation‐π interaction‐based biointerface is engineered on a CNT‐FET for label‐free detection of PD‐1. PD‐1 monoclonal antibodies are orientedly immobilized via cation‐π interactions between PCz‐wrapped semiconducting single‐walled carbon nanotubes and the Fc region of the monoclonal antibody.
Chunmin Jia +8 more
wiley +1 more source
Polyaniline Nanotubes/Carbon Cloth Composite Electrode by Thermal Acid Doping for High-Performance Supercapacitors. [PDF]
Polymers (Basel), 2019 Hui J, Wei D, Chen J, Yang Z.
europepmc +1 more source
Shape Memory Polymer‐Based Flexible Pressure Sensor for Real‐Time Venous Thrombosis Monitoring
Advanced Materials Interfaces, EarlyView.A shape‐memory tubular flexible pressure sensor with a 100‐mesh microstructured SMP‐PLA/MWCNTs sensing layer was developed for PICC‐mounted monitoring of thrombosis‐related pressure changes. The sensor combines high sensitivity (204 kPa−1), a fast response time (28 ms), and conformal catheter fixation and was validated by hydrostatic and ex vivo ...
Yi Chen +7 more
wiley +1 more source
Recent Advances of Slip Sensors for Smart Robotics
Advanced Materials Technologies, EarlyView.This review summarizes recent progress in robotic slip sensors across mechanical, electrical, thermal, optical, magnetic, and acoustic mechanisms, offering a comprehensive reference for the selection of slip sensors in robotic applications. In addition, current challenges and emerging trends are identified to advance the development of robust, adaptive,
Xingyu Zhang +8 more
wiley +1 more source