Results 21 to 30 of about 11,912,762 (211)
Metals, 2022 Al/Cu dissimilar joining is a key technology for reducing the weight and cost of electrical components. In this study, the dissimilar friction stir lap welding (FSLW) of a Ni-containing Al alloy to pure Cu was performed, and the effects of the addition ...
Kota Kurabayashi +2 more
doaj +1 more source
Electron Microscopy Characterization of Ni-Cr-B-Si-C Laser Deposited Coatings [PDF]
, 2013 During laser deposition of Ni-Cr-B-Si-C alloys with high amounts of Cr and B, various microstructures and phases can be generated from the same chemical composition that results in heterogeneous properties in the clad layer.
Ocelik, V. +8 more
core +1 more source
Journal of Materials Research and Technology, 2023 Non-BCC high entropy alloys have been created and characterized in their as-cast and oxidized condition. The effect of Si on the microstructures in Al–Cu–Ni–Mn alloy has also been explored. The microstructure remained unaltered by the addition of Si.
Mckenna Mae Lin Hitter, S.K. Varma
doaj +1 more source
Phase stability of Ni–Al nanoparticles
Journal of Materials Research, 1999 The phase stability of Ni–Al clusters of nanometer size was studied by using the embedded atom model and Monte Carlo simulation techniques. For temperatures of 500 and 1000 K and for a range of compositions below 70 at.% Al, the equilibrium structures of the system were determined and compared with the bulk results. We found that the bulk NiAl (B2) and
Ramos, Susana +2 more
openaire +4 more sources
Metals, 2021 Dissimilar metal joining between Al and Cu is effective for reducing the weight and cost of electrical components. In this study, dissimilar lap joining of pure Al to pure Cu with an Al-Ni filler material was conducted using tungsten inert gas (TIG) arc ...
Hiroki S. Furuya +3 more
doaj +1 more source
Materials & Design, 2021 Here, the novel combination of multi-interlayers composed of Ni, Al, and Zn foil was used to join AZ31/2024 dissimilar alloys via ultrasonic-assisted transient liquid phase bonding (U-TLP) in air condition.
Zilong Peng +5 more
doaj +1 more source
Materials Research Express, 2020 Herein, the effect of substitution of Ni with Ni _3 Al and two-step sintering on the phase transformation, microstructure evolution, and properties of W–6Ni–4Co alloys were evaluated. The results show that the reaction products of Ni _3 Al and Co include
Hongfeng Dong +3 more
doaj +1 more source
Der Dīwān des ʿAbd-al-Laṭīf Fatḥallāh
, 1984 Der Dīwān des ʿAbd-al-Laṭīf ...
Fatḥallāh, ʿAbd-al-Laṭīf Ibn-ʿAlī
core +1 more source
Lightweight Gaussian Process-Based Visual Servoing for Autonomous Wheelchair Sidewalk Navigation
IEEE AccessThe personal mobility of wheelchair users is pivotal to their overall well-being. Navigating electric wheelchairs through confined spaces poses notable challenges, particularly for individuals with disabilities.
A. H. Abdul Hafez +3 more
doaj +1 more source
Materials Research Express, 2021 ZrO _2 /Ni _3 Al-Ni _3 Al double-layer coating on stainless steel was prepared by powder sintering one-step forming process. The surface-interface morphologies, chemical element distribution and phase compositions of the coatings before and after thermal
Xinxing Li +4 more
doaj +1 more source