Results 221 to 230 of about 68,049 (303)

Investigation of Creep Properties of Ti‐43Al‐5V‐4Nb Alloy Considering Oxidation Effects Using Miniature Specimens

Fatigue &Fracture of Engineering Materials &Structures, EarlyView.
ABSTRACT In the present study, creep tests of a TiAl alloy were conducted using miniature specimens (d = 2 mm) under various conditions to investigate their creep properties at 760°C. The test results indicate that creep rupture time obtained using miniature specimens at identical applied stress levels increase with the order of test condition Ar gas ...
Lei He, Takamoto Itoh, Noritake Hiyoshi
wiley   +1 more source

Influence of Finish Line and CAM Unit on the Marginal Adaptation and Margin Trueness of Lithium Disilicate Glass‐Ceramic and Composite Resin Onlay Restorations

Journal of Esthetic and Restorative Dentistry, EarlyView.
ABSTRACT Objective To evaluate the marginal adaptation and margin trueness of lithium disilicate glass‐ceramic (LDS) and glass‐filler reinforced composite resin (CR) onlays fabricated using three different finish lines and two chairside CAM units (4‐ and 5‐axis). Methods LDS (e.max CAD) and CR (Tetric CAD) onlays were fabricated on butt joint, chamfer,
João Pitta, Gülce Çakmak, Maurice Salem, Philippe Mojon, Irena Sailer, Philippe Boitelle   +5 more
wiley   +1 more source

Diagnostic Accuracy of Dentin Sclerosis by Optical Coherence Tomography and the North Carolina Index in Noncarious Cervical Lesions

Journal of Esthetic and Restorative Dentistry, EarlyView.
ABSTRACT Objective To evaluate the diagnostic accuracy of optical coherence tomography (OCT) and the North Carolina Index (NCI) for identifying dentin type (sclerotic vs. nonsclerotic) in natural noncarious cervical lesions (NCCLs). Materials and Methods Thirty extracted human premolars with 30 NCCLs (90 regions of interest) were analyzed. Two blinded,
Nathalie Murielly Rolim de Abreu, Rudyard dos Santos Oliveira, Anauara Lima e Silva, Laryssa Mylenna Madruga Barbosa, Alessandro Dourado Loguercio, Frederico Barbosa de Sousa   +5 more
wiley   +1 more source

Leveraging modified ex situ tomography data for segmentation of in situ synchrotron X‐ray computed tomography

Journal of Microscopy, EarlyView.
Abstract In situ synchrotron X‐ray computed tomography enables dynamic material studies. However, automated segmentation remains challenging due to complex imaging artefacts – like ring and cupping effects – and limited training data. We present a methodology for deep learning‐based segmentation by transforming high‐quality ex situ laboratory data to ...
Tristan Manchester, Adam Anders, Julio Spadotto, Hannah Eccleston, William Beavan, Hugues Arcis, Brian J. Connolly   +6 more
wiley   +1 more source

Trueness of the apical and middle root portion segments of 3D‐printed removable die and alveolar cast designs manufactured using stereolithographic 3D printing

Journal of Prosthodontics, EarlyView.
Abstract Purpose The present study evaluated the effects of the root portion design, segment (middle vs. apical), and part (die vs. cast) on the trueness of three‐dimensional (3D)‐printed removable die‐cast complex. Material and Methods The trueness of apical and middle segments of the root portion of 45 3D‐printed removable dies and casts with three ...
Francisco X. Azpiazu‐Flores, William M. Johnston, Dean Morton, Wei‐Shao Lin, Burak Yilmaz   +4 more
wiley   +1 more source

Marginal gap of printed, milled, and heat‐pressed two‐piece polyetheretherketone abutments before and after thermal cycling, and their pull‐off bond strength after thermal cycling

Journal of Prosthodontics, EarlyView.
Abstract Purpose To evaluate the marginal gap of two‐piece polyetheretherketone (PEEK) abutments fabricated with different methods, before and after thermal cycling, while also focusing on their pull‐off bond strength. Materials and Methods A two‐piece abutment was virtually designed after digitizing a titanium‐base (Ti‐base) abutment.
Almira Ada Diken Türksayar, Burcu Kanpalta, Naime Bilinç Bulucu, Sandra Schulnig, Sebastian Spintzyk, Münir Demirel, Mustafa Borga Donmez   +6 more
wiley   +1 more source

Effect of margin thickness and cement gap on the fabrication and fit accuracy of additively manufactured crowns in definitive resins with different filler content

Journal of Prosthodontics, EarlyView.
Abstract Purpose To evaluate how commercially available composite resins in varying filler content affect the fabrication and fit accuracy (trueness and precision) of additively manufactured (AM) definitive crowns with different margin thickness and cement gaps by comparing them to subtractively manufactured (SM) polymer‐infiltrated ceramic crowns ...
Mustafa Borga Dönmez, Gülce Çakmak, Çiğdem Kahveci, Amir H. Nejat, Burak Yilmaz, Pinar Altinci   +5 more
wiley   +1 more source

Effects of printing temperature and post‐curing duration on the dimensional reproducibility and fracture load of 3D‐printed dental prostheses: An exploratory study

Journal of Prosthodontics, EarlyView.
Abstract Purpose This in vitro study aimed to evaluate the effects of printing temperature and post‐curing duration on the dimensional reproducibility and mechanical properties of three‐dimensional (3D)–printed dental prostheses. Materials and Methods Photopolymer specimens were fabricated using a stereolithographic 3D printer at two temperatures: room
Ji‐Min Lee, KeunBaDa Son, Kyu‐Bok Lee   +2 more
wiley   +1 more source

Using reflectance spectra and Pl@ntNet to identify herbarium specimens: a case study with Lithocarpus

New Phytologist, EarlyView.
Summary The digitisation of plant collections is bringing large quantities of information into accessible electronic databases. However, in recent decades, traditional taxonomic work in collections has declined, meaning that more specimens are only determined to family or genus, particularly when lacking key identification structures.
Barbara M. Neto‐Bradley, Pierre Bonnet, Hervé Goëau, Alexis Joly, Jeannine Cavender‐Bares, David A. Coomes   +5 more
wiley   +1 more source

Reduced snow cover at the alpine treeline: resistance and recovery of saplings

New Phytologist, EarlyView.
Summary At high elevations, tree saplings and shrubs are usually protected by mid‐winter snow cover, although climate change is expected to extend the snow‐free (SF) period. Exposure to winter drought, freeze–thaw events and freezing temperatures will therefore increase, inducing damages to the hydraulic system and to living cells, resulting in reduced
Katline Charra‐Vaskou, Guillaume Charrier, Andrea Ganthaler, Thierry Améglio, Stefan Mayr   +4 more
wiley   +1 more source