Results 61 to 70 of about 38,767 (265)

Design of Nonuniform Filter Bank Transceivers for Frequency Selective Channels

EURASIP Journal on Advances in Signal Processing, 2007
In recent years, there has been considerable interest in the theory and design of filter bank transceivers due to their superior frequency response.
Yuan-Pei Lin, See-May Phoong, Han-Ting Chiang   +2 more
doaj   +2 more sources

Nonlinear Response of High Arch Dams to Nonuniform Seismic Excitation Considering Joint Effects

Journal of Engineering, 2013
Nonuniform excitation due to spatially varying ground motions on nonlinear responses of concrete arch dams is investigated. A high arch dam was selected as numerical example, reservoir was modelled as incompressible material, foundation was assumed as ...
Masoomeh Akbari, Mohammad Amin Hariri-Ardebili, Hasan Mirzabozorg   +2 more
doaj   +1 more source

Influence of Test Temperature and Test Frequency on Fatigue Life of Aluminum Alloy EN AW‐2618A

Advanced Engineering Materials, EarlyView.
The influence of test temperature and test frequency on the fatigue life of EN AW‐2618A is investigated. High‐cycle fatigue tests are performed at different test temperatures and frequencies on the 1000 h/230°C overaged state. Both test parameters reduce fatigue life due to time‐dependent damage mechanisms.
Ying Han, Julian M. Rosalie, Jan Radners, Mauro Madia, Philipp von Hartrott, Birgit Skrotzki   +5 more
wiley   +1 more source

Nonuniform Sampling and Multiscale Computation [PDF]

Multiscale Modeling & Simulation, 2014
In homogenization theory and multiscale modeling, typical functions satisfy the scaling law $f^ε(x) = f(x,x/ε)$, where $f$ is periodic in the second variable and $ε$ is the smallest relevant wavelength, $0<ε\ll1$. Our main result is a new $L^{2}$-stability estimate for the reconstruction of such bandlimited multiscale functions $f^ε$ from periodic ...
Björn Engquist, Christina Frederick
openaire   +2 more sources

High‐Temperature Nanoindentation of Metals: Assessing Thermal Drift, Frame Compliance, and Chemical Composition Effects on the Reported Mechanical Properties

Advanced Engineering Materials, EarlyView.
Do not let thermal drift and instrument artifacts deceive high‐temperature nanoindentation results. We compare classical Oliver–Pharr and automatic image recognition analyses across steels and a Ni alloy to quantify these effects. Accounting for artifacts reveals systematic softening with temperature, while Cr and Ni additions boost resistance ...
Velislava Yonkova, Steffen Brinckmann, Ruth Schwaiger   +2 more
wiley   +1 more source

Space cutter compensation method for five-axis nonuniform rational basis spline machining

Advances in Mechanical Engineering, 2015
In view of the good machining performance of traditional three-axis nonuniform rational basis spline interpolation and the space cutter compensation issue in multi-axis machining, this article presents a triple nonuniform rational basis spline five-axis ...
Yanyu Ding, Taiyong Wang, Bo Li, Jingchuan Dong, Zhe Liu   +4 more
doaj   +1 more source

Creep Properties and Deformation Mechanism of Additively Manufactured NiAl‐CrMo Composites

Advanced Engineering Materials, EarlyView.
Additively manufactured NiAl‐CrMo composites contain numerous interfaces and cell boundaries that control their creep response. At 700°C under high applied stress, creep is dominated by dislocation‐controlled power‐law mechanisms. At 800°C–900°C and lower stresses, creep is primarily diffusion‐controlled along cell boundaries.
Jan Vollhüter, Andreas Bezold, Johan Westraadt, Katharina Fiegl, Subham Chattoraj, Benjamin Wahlmann, Carolin Körner, Michael Mills, Mathias Göken, Steffen Neumeier   +9 more
wiley   +1 more source

A Dichotomy Theorem for Nonuniform CSPs [PDF]

2017 IEEE 58th Annual Symposium on Foundations of Computer Science (FOCS), 2017
In this paper we prove the Dichotomy Conjecture on the complexity of nonuniform constraint satisfaction problems posed by Feder and Vardi.
openaire   +2 more sources

Recycling of NiTi Shape Memory Alloys: Fundamental and Technological Aspects of a Vacuum Induction Melting Processing Route

Advanced Engineering Materials, EarlyView.
The present study investigates recycling of NiTi shape memory alloys via vacuum induction melting. An ingot was synthesized from elemental Ni and Ti and subjected to three subsequent remelting cycles. Remelting increases process durations and impurity levels and adversely affects microstructures and functional properties.
Sakia Sophia Noorzayee, Son Tung Mai, Sarath Menon, Braulio Gadiel Sánchez Ortega, Ralf Drautz, Alexander Kauffmann, Gunther Eggeler, Jan Frenzel   +7 more
wiley   +1 more source

Cathodic Cage Plasma Deposition of Nanostructured Cu–Fe–Se Coatings on Poly(methyl Methacrylate)

Advanced Engineering Materials, EarlyView.
Nanostructured Cu–Fe–Se coatings are deposited on PMMA by a modified cathodic cage plasma process, enabling low‐temperature deposition on polymer substrates. A transition from discontinuous to compact morphology is observed with temperature, with optimal properties at 200°C, where improved CuFeSe2‐type bonding, lowest sheet resistance, and favorable ...
V. S. S. Sobrinho, M. Naeem, T. H. C. Costa, M. S. Libório, J. C. A. Queiroz, C. B. B. Luna, R. R. M. Sousa, P. S. Vieira, E. M. Araújo   +8 more
wiley   +1 more source