Results 171 to 180 of about 777 (212)

Separation and Recycling of Used Oil-Based Drilling Fluids

IPTC 2009: International Petroleum Technology Conference, 2009
Abstract A novel approach has been taken to separating, recovering and recycling the oil-continuous phase from used oil-based drilling fluids. The method is based on destabilizing and aggregating the suspended solids and brine droplets through the application of polymers and surfactants in a controlled mixing device.
Ray Farinato, Henry M. Masias, Diana Garcia, Richard Bingham, Glenn David Antle   +4 more
openaire   +1 more source

Sag of Weight Materials in Oil Based Drilling Fluids

Proceedings of IADC/SPE Asia Pacific Drilling Technology, 2002
Abstract To be able to keep a well under control during drilling it is important to have the weight material suspended during the whole operation. Especially in oil based, or synthetic based drilling fluids, controlling sag is difficult.
openaire   +1 more source

Drilling and Gravel Packing with an Oil Base Fluid System

Journal of Petroleum Technology, 1969
Formation damage usually is attributable to fluid systems that contain clay or significant amounts of water. Field experience, as well as laboratory studies, indicates that this damage can be avoided through the use of an oil-asphalt fluid system for drilling, completing, and gravel packing. Introduction
Norbert E. Methven, Jerome G. Kemick
openaire   +1 more source

Anaerobic Biodegradability of Oil Base Fluid For Invert Emulsion Drilling Fluid.

Proceedings of IADC/SPE Drilling Conference, 1998
Abstract Environmental legislations restrict the use of oil based muds, specially in North Sea and their discharge under the form of oily cuttings. Different synthetic based muds (SBM) are proposed for replacing gas oil as the base fluid.
D. Blanchet, A. Audibert, J-F. Argillier
openaire   +1 more source

Monitoring of Atmospheres Associated With Oil-Based Drilling Fluids

Proceedings of SPE Health, Safety and Environment in Oil and Gas Exploration and Production Conference, 1994
Abstract In the latest years there has been a growing concern about the environmental aspects of the oil & gas industry activities. This awareness has been expressed not only by the public and the authorities but also by the industry itself.
openaire   +1 more source

Flat-rheology oil-based drilling fluid for deepwater drilling

International Journal of Heat and Technology, 2017
Xin Zhao, Zhengsong Qiu, Jiangen Xu, Chao Zhao, Jian Gao   +4 more
openaire   +1 more source

Oil-based drilling fluid inspired by paints recipes

Applied Clay Science, 2023
Qiang Li, Laurence de Viguerie, Christelle Souprayen, Sandra Casale, Maguy Jaber   +4 more
openaire   +1 more source

Anaerobic Biodegradability of Oil-Based Fluid for Invert-Emulsion Drilling Fluids

Journal of Petroleum Technology, 1998
This article is a synopsis of paper SPE 39386, "Anaerobic Biodegradability of Oil-Base Fluid for Invert-Emulsion Drilling Fluids," by D. Blanchet, A. Audibert, SPE, and J-F. Argillier, SPE, Inst. Francais du Petrole, originally presented at the 1998 IADC/SPE Drilling Conference, Dallas, 3-5 March.
openaire   +1 more source

Experimental Study on the Influence of Nanoparticles on Oil-Based Drilling Fluid Properties

Journal of Petroleum Science and Engineering, 2022
Evgeniya Mikhienkova, A V Minakov, V Ya Rudyak   +2 more
exaly  

A New Environmental Friendly Oil-Based Drilling Fluid

2023
Jia-qi Zhang, Xie Tao, Li-li Yan, Rong-chao Cheng, Jian-hua Wang, Hai-jun Yang, Xiao-xiao Ni   +6 more
openaire   +1 more source