Results 1 to 10 of about 4,904 (167)

Flexural behavior of concrete beams with horizontal and vertical openings reinforced by glass-fiber-reinforced polymer (GFRP) bars

open access: yesJournal of the Mechanical Behavior of Materials, 2022
This study conducted an analytical investigation on the behavior of concrete beams with openings reinforced by glass-fiber-reinforced polymer (GFRP) bars. In this study, five proposed beams reinforced by GFRP bars as flexural and shear reinforcement with
Ali Hasan Hussein   +1 more
exaly   +2 more sources

Experimental Study on the Performance of Concrete Beams Including Holes Reinforced with Glass Fiber Polymer [PDF]

open access: yesE3S Web of Conferences, 2023
This paper carried out An examination of the performance characteristics of concrete beams including openings that were reinforced with Glass Fiber Reinforced Polymer (GFRP) bars.
Ali Hasan Hussein, Said Abdulmuttailb I.
doaj   +1 more source

Performance of Reinforced Concrete Gable Beam with Quadrilateral Openings of Different Side Inclinations [PDF]

open access: yesE3S Web of Conferences, 2023
The existence of openings in a gable beam would have numerous advantages, the most important of which would be a reduction in the overall weight. These advantages include geometric flexibility, ease of handling when erected, and more.
Mohammed Mohammed H., Izzet Amer F.
doaj   +1 more source

Energy Dissipation Through Pool Downstream Vertical Gates [PDF]

open access: yesPort Said Engineering Research Journal, 2023
The hydraulic jump downstream gates leads to increase the length of stilling basin for protection hydraulic structures from failures. In this paper a new technique to increase energy dissipation between upstream and downstream through vertical gate with ...
tarek nasralla, ahmed awwad
doaj   +1 more source

Influence of Masonry Infill Wall Position and Openings in the Seismic Response of Reinforced Concrete Frames

open access: yesApplied Sciences, 2022
It is now widely recognized that the masonry infill frame used in reinforced concrete structures (RC) greatly enhances both the rigidity and strength of the surrounding frame.
Abdelghaffar Messaoudi   +3 more
doaj   +1 more source

Effects of Openings and Axial Load Ratio on the Lateral Capacity of Steel-Fiber-Reinforced Concrete Shear Walls

open access: yesBuildings, 2022
Shear walls are commonly adopted as main structural members to resist vertical and lateral forces, thanks to their high load capacity and high lateral stiffness.
Zhou Lin   +3 more
doaj   +1 more source

Performance of FRP-Upgraded RC One-Way Ribbed Slabs with an Opening in Flexure Zone

open access: yesBuildings, 2023
Reinforced concrete (RC) one-way ribbed slabs serve as a prevalent flooring solution in the Middle East. In this region, the occurrence of openings within these slabs is frequent, particularly when making modifications to existing buildings.
Amjad Al Kallas   +4 more
doaj   +1 more source

Structural Efficiency of Hollow Reinforced Concrete Beams Subjected to Partial Uniformly Distributed Loading

open access: yesBuildings, 2021
Reinforced concrete (RC) beams containing a longitudinal cavity have become an innovative development and advantage for economic purposes of light-weight members without largely affecting their resistance against the applied loads.
Hadi Naser Ghadhban Al-Maliki   +3 more
doaj   +1 more source

Experimental and Numerical Analysis of Structural Capacity of Perforated Stiffened Plates

open access: yesJournal of Marine Science and Engineering, 2023
This study presents experimental and numerical analyses of compressive collapse tests of initially corroded steel-stiffened plates with multiple circular openings, which may be used as tank wash plates.
S. Saad-Eldeen, Yordan Garbatov
doaj   +1 more source

Studies on the reaction sintered zirconia-mullite-alumina composites with titania as additive

open access: yesCerĂ¢mica, 2013
Zirconia-mullite-alumina composites were prepared by reaction sintering of micro fine calcined alumina and zircon flour in different ratios. TiO2 was added in different proportions as an additive and the starting materials were iso-statically pressed ...
D. Chandra   +3 more
doaj   +1 more source

Home - About - Disclaimer - Privacy