Results 131 to 140 of about 562 (182)

Flame stretch effects on partially premixed flames

Combustion and Flame, 2000
Abstract Flame stretch is an important characteristic of flame behavior that arises due to flow motion and nonuniformity, and flame curvature. Various investigators have obtained different expressions for flame stretch by employing dissimilar analytical approaches for diverse flame configurations.
Chun W Choi, Ishwar K Puri
openaire   +1 more source

Modelling and Calculation of a Partially Premixed Turbulent Flame

Combustion Science and Technology, 1999
A partially premixed turbulent flame has been modelled using the laminar flamelet concept, i.e. the assumption that laminar flames are embedded in the turbulent flow field. A combination of a premixed flamelet model and a diffusion flamelet model has been used for modelling this partially premixed flame.
Ovink, R., Lamers, A.P.G.G.
openaire   +2 more sources

Partially premixed turbulent flame propagation in jet flames

Symposium (International) on Combustion, 1994
Flamelet formulations for premixed and non-premixed combustion are combined in order to treat partiallypremixed combustion in the fast chemistry limit. The flamelet concept for non-premixed combustion is based on the equation for the mixture fraction Z (x, t ), while that for premixed combustion uses a field equation for the scalar field G (x, t ...
C.M. Müller, H. Breitbach, N. Peters
openaire   +1 more source

NO formation in counterflow partially premixed flames

Combustion and Flame, 2007
An experimental and computational study of NO formation in low-strain-rate partially premixed methane counterflow flames is reported. For progressive fuel-side partial premixing the peak NO concentration increased and the NO distribution along the stagnation streamline broadened.
Hemant Mungekar, Arvind Atreya
openaire   +1 more source

Partial premixing in diffusion flame quenching

ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2001
AbstractUsing Direct Numerical Simulation, we focus on the development of partial premixing in laminar diffusion flame quenching. Calculations are performed in the configuration of a 2‐D diffusion flame squeezed by a pair of vortices. First, the flame undergoes strong finite rate chemistry effects, linked to high levels of strain rate induced by ...
Favier, V., Vervisch, L.
openaire   +2 more sources

Influence of Fuel Premixing on Partially Premixed Flames in Porous-Wall Channels

International Journal of Nonlinear Sciences and Numerical Simulation, 2017
Abstract This paper examines the influence of mixing a fuel with an oxidizer-rich reactant on the existence and propagation of partially premixed flames formed in a porous-wall channel. The amount of the injected fuel has been taken as a parameter to generate different states of the combustion mixtures.
openaire   +2 more sources

Partially premixed flames in stagnating turbulence: The merging of planar triple flames

Combustion and Flame, 2008
Abstract The aim of this work, which takes a RANS perspective, is to consider the prospect of establishing a planar turbulent triple flame whose mean consists of two parallel premixed flame brushes separated by a nonpremixed flame brush. Experiments involving a counterflow between fuel-rich and fuel-lean turbulent streams are considered.
Bray, K.N.C., Champion, M., Libbay, P.A
openaire   +1 more source

Fuel effects on NOx emissions in partially premixed flames

Combustion and Flame, 2004
Abstract The requirement to significantly reduce NOx and particulate emissions while maintaining combustor performance is one of the main drivers for internal combustion engine research. Partially premixing and using fuel blends represent two promising approaches for reducing both the NOx and the particulate emissions from flames.
Suresh Aggarwal, Sayangdev Naha
openaire   +1 more source

Combustion Modeling of Partially Premixed Flames

Volume 2: Combustion, Fuels and Emissions, Parts A and B, 2010
Accurate and properly validated turbulence-chemistry interaction models for RANS combustion computational fluid dynamics (CCFD) simulations are required in support of the development process of modern gas turbine combustors. Although standard models are available for fully premixed and purely non premixed turbulent combustion, models describing ...
Ilona Zimmermann, Michael Pfitzner
openaire   +1 more source

Edge flames and partially premixed combustion in diffusion flame quenching

Combustion and Flame, 2001
The aim is to focus on the development of partially premixed combustion after diffusion flame quenching. To this end, the quenching of a planar two-dimensional diffusion flame is studied by using numerical simulation. A flame hole is obtained by submitting the reaction zone to a high strain and scalar dissipation rate resulting from the interaction ...
Vervisch, Luc, Favier, Valérie
openaire   +3 more sources