Results 71 to 80 of about 1,089,540 (201)
Phosphorus‐modified TPUs are prepared by one‐step, solvent‐free reactive melt processing using phosphate‐ or phosphonate‐containing diols and PEG or PPG soft segments. Fire behavior and mechanical response depend strongly on both chemistries. Peak heat release rate decreases by up to 54%, but reduced tensile strength and V‐2 dripping behavior reveal a ...
Léa Gratier +4 more
wiley +1 more source
The Importance of Thermodynamic Data for Pyrrole Pyrolysis and Combustion Chemistry
High level ab initio quantum chemical computations with ORCA 6.1.1 are done to derive enthalpy and entropy of formation at 298.15 K for 32 species that include both radicals and stable molecules relevant to the pyrolysis and combustion of pyrrole. The effects of thermochemical data on chemical model performance are assessed.
Atmadeep Bhattacharya +3 more
wiley +1 more source
Characterization of a 5-nozzle array using premix/micromix injection for hydrogen
Hydrogen is one of the most promising fuels to decarbonize energy systems since it has a high specific energy, a carbon-free combustion process, and may be produced sustainably through electrolysis.
Antoine Durocher +8 more
doaj +1 more source
A modeling study on the combustion characteristics of alcohol/diesel dual fuel counterflow flame
This study combines a 0D Well Stirred Reactor (WSR), 1D counterflow flame, experimental data, and a 1D gas dynamic model to create an integrated modeling tool to study the dual fuel combustion behavior in engine-relevant conditions, fueled with E85 and ...
Pourya Rahnama +2 more
doaj +1 more source
It is of practical significance to understand the flame puffing behavior under varying mass flow rate of primary air ṁpri. An experiment was conducted to study the impact of ṁpri on flame puffing in a swirl partially premixed combustor, the puffing ...
Zhongya Xi +4 more
doaj +1 more source
Synthesis of functionalized polyolefins in a new continuous bench‐scale reactor apparatus
Abstract In‐reactor functionalized polyolefins (FPOs), produced by molecular catalysts, are a new class of polymer materials with applications ranging from high performance adhesives to bitumen compatibilization. In this work, we disclose a procedure for the synthesis of FPOs in a new Continuous Bench‐scale Reactor Apparatus (COBRA).
Miloud Bouyahyi +7 more
wiley +1 more source
CFD analysis of a diesel–CH4–H2 tri‐fuel engine shows that increasing hydrogen energy share (HES) enhances mixing and accelerates combustion, improving pressure, efficiency, and reducing CO and soot. At 60% HES, ISFC improves 26.2%, soot drops 95%, while NOx increases due to higher temperatures. ABSTRACT The global commitment to achieve net‐zero carbon
Md. Ifthaker Alam +4 more
wiley +1 more source
In recent years, the tomographic visualization of laminar and turbulent flames has received much attention due to the possibility of observing combustion processes on-line and with high temporal resolution.
Thomas Häber +2 more
doaj +1 more source
Effect of HBr on Explosion Limits of Stoichiometric Hydrogen‐oxygen Mixture
ABSTRACT This work, based on numerical simulations, discusses the effect of HBr as an inhibitor on the explosion limit of stoichiometric hydrogen‐oxygen gas mixture in a closed spherical vessel. The numerical simulation solves the complete governing equations for mass, momentum, species and energy.
Chunkan Yu, Peter Glarborg
wiley +1 more source
This study reveals the regulatory effect of LPG addition on laminar burning velocity of DME/air mixtures, and elucidates the governing mechanisms of flame instability under varying initial conditions. ABSTRACT Liquefied petroleum gas/dimethyl ether (LPG/DME) blended gas is a promising clean alternative fuel, characterized by high efficiency and clean ...
Qi Zhang +12 more
wiley +1 more source

