Results 61 to 70 of about 6,392,536 (349)

Life cycle assessment of Libyan crude oil [PDF]

open access: yes, 2014
Petroleum products such as petrol and diesel are fossil fuels and have a high environmental impact. There is a demand to minimize these impacts especially in the upstream and midstream oil operations, i.e. exploration, production and refining processes,
Higginson, M, Irhoma, A, Su, D
core  

Population of Nonmetallic Inclusions in Liquid High‐Silicon Electrical Steel in Contact With MgO–C Refractories Based on Recyclates and Environmentally Friendly Binders

open access: yesAdvanced Engineering Materials, EarlyView.
The formation of nonmetallic inclusions (NMIs) was investigated in this study, carrying out immersion tests for 30 min at a temperature of 1600°C with liquid high‐silicon electrical steel (Si ≈ 3 mass‐%) and different MgO–C refractories. Conventional MgO–C refractories were considered, as well as MgO–C refractories containing MgO–C recyclate and ...
Lukas Neubert   +6 more
wiley   +1 more source

Endurance Assessment of the Concrete and Reinforced Concrete Load-Bearing Structures, Impregnated by Petroleum

open access: yesRUDN Journal of Engineering Research, 2014
In many concrete and reinforced concrete elements of load-bearing structures, exposed to the frequently changing loads, accumulated fatigue damage of the material, leading to destruction.
A P Svintsov   +2 more
doaj  

Toward Low‐Consumable Anodes: Process Simulation and Prospective Life Cycle Assessment of NiFe2O4‐NiO‐Ni‐Cu vs. Prebaked Anodes for Aluminum Production with use of Molten Salt Electrolysis

open access: yesAdvanced Engineering Materials, EarlyView.
Low‐consumable nickel ferrite‐based anodes for the Hall–Héroult process are compared with conventional prebaked carbon anodes using thermodynamic simulation and prospective life cycle assessment under contrasting future electricity system pathways from 2025 to 2050.
Felipe Alejandro Garcia Paz   +6 more
wiley   +1 more source

Decontamination of petroleum products Patent [PDF]

open access: yes, 1968
Decontamination of petroleum products with ...
Mosier, J. R.
core   +1 more source

Interaction of Ladle Slag With Varying SiO2 Content and Recyclate‐Based MgO–C Refractories

open access: yesAdvanced Engineering Materials, EarlyView.
Ladle slags (CaO/Al2O3 = 1) with 1–20 wt% SiO2 were investigated in contact with industrial MgO–C refractories fabricated from fresh magnesia and 50 wt% recyclate. The sessile drop method at 1600°C reveals intensive gas formation, delayed slag infiltration in recyclate‐based samples, and, under high‐SiO2 slag, formation of a dense MgAl2O4‐rich ...
Anton Yehorov   +6 more
wiley   +1 more source

Narrow-leaved willowherb – phytogenic supplement for dairy cow diets

open access: yesЖурнал биологических наук и сельского хозяйства
To create effective feed additives for animal husbandry, various wild and cultivated plants are used. A promising crop for use in dairy cattle breeding is narrow-leaved Wwillowherb.
O.B. Filippova   +3 more
doaj   +1 more source

Impact of Sustainable Binders Based on Lignin and Collagen on the Volume Stability and Mechanical Properties of MgO‐C Refractories with MgO‐C Recyclates

open access: yesAdvanced Engineering Materials, EarlyView.
Collagen hydrolysate is evaluated as a sustainable binder for MgO‐C refractories. Its thermally induced cross‐linking and gas release lead to expansion and cracking in large bricks, but tailored batches with lignin, recyclates, or fine graphite improve the gas release while thermal treatment and stability.
Till M. J. Stadtmüller   +8 more
wiley   +1 more source

Will oil prices choke growth? [PDF]

open access: yes
Petroleum products - Prices ; Petroleum industry and ...
Christopher J. Neely
core  

Development of Sustainable MgO–C Refractories Using MgO–C Recyclates and a Novel Eco‐Friendly Fructose–Tannin Binder Crosslinked With Citric Acid

open access: yesAdvanced Engineering Materials, EarlyView.
This study develops sustainable MgO–C refractories using recycled materials and eco‐friendly fructose–tannin binders. The enhanced performance of citric acid as a cross‐linker and functional additives on mechanical and thermomechanical properties was examined. Characterization included strength tests, immersion trials, and microstructural and inclusion
Dinesh K. Gunasekar   +7 more
wiley   +1 more source

Home - About - Disclaimer - Privacy