Results 11 to 20 of about 18,652 (294)
Egyptian Journal of Petroleum, 2023 Amine processes are the advanced technology available today for the removal of carbon dioxide (CO2) and hydrogen sulfide (H2S) acid gases. Methyldiethanolamine (MDEA) is a well-known tertiary amine used selectively for the removal of carbon dioxide from ...
Walaa Mahmoud Shehata +2 more
doaj +1 more source
Egyptian Journal of Petroleum, 2017 One of the most significant procedures in oil refineries is naphtha catalytic reforming unit in which high octane gasoline is gained. Normally, in oil refineries, flow instability in the composition of feedstock can affect the product quality. The aim of
Hussien A. Elsayed +4 more
doaj +1 more source
Hydrotreating of waste lube oil by rejuvenated spent hydrotreating catalyst
Egyptian Journal of Petroleum, 2014 Large quantities of catalysts are used in the Egyptian refining industry for the purification and upgrading of various petroleum streams. These catalysts gradually lose activity through deactivation with time and the spent catalysts were usually ...
Sadeek A. Sadeek +4 more
doaj +1 more source
Fabrication of CoNiMo/γ-Al2O3 from waste aluminum foil to convert waste lube oil to hydrotreated oil
Egyptian Journal of Petroleum, 2021 Because of the heavy metal content and other toxic chemicals, used lubricating oil remains one of the most serious environmental concerns. The target of this work is the synthesis of γ-Al2O3 from waste aluminum foil and re-refining waste lubricating oils
Asmaa A. Abdelrahman +3 more
doaj +1 more source
Energy saving in oilfields by using waste heat in the disposed water [PDF]
Chemical Industry and Chemical Engineering Quarterly, 2023 The present work aims to retrofit an existing Egyptian oilfield plant to improve desalter performance and reduce the power of crude oil shipping pumps. In this work, waste heat in disposed water that represents a value is used in heating brackish water ...
Shehata Walaa Mahmoud +2 more
doaj +1 more source
Development of a New Two-Phase Fluid Atomizer Nozzle in Pilot Scale for Fluid Catalytic Cracking Process [PDF]
Iranian Journal of Chemistry & Chemical Engineering, 2021 The uniform atomization of FCC feed causes to produces desirable products like gasoline and decreases undesirable products like coke and dry gas. The atomization process caused the selectivity and efficiency of main products to increase.
Amir Farshi, Ali Jabreili Jolodar
doaj +1 more source
Highly effective ionic liquids for biodiesel production from waste vegetable oils
Egyptian Journal of Petroleum, 2015 As conventional energy sources deplete, the need for developing alternative energy resources which are environment friendly becomes more imperative. Vegetable oils are attracting increased interest in this purpose.
Fathy A. Yassin +5 more
doaj +1 more source
Characterization of various zinc oxide catalysts and their activity in the dehydration-dehydrogenation of isobutanol [PDF]
Journal of the Serbian Chemical Society, 2008 Mono and bifunctional zinc oxide catalysts were prepared to study their activity in the catalytic conversion of isobutanol. The prepared catalysts were characterized by X-ray diffraction analysis and nitrogen adsorption measurements.
Saad Lamia, Riad Mary
doaj +1 more source
Enhanced light olefins production via n-pentane cracking using modified MFI catalysts
Heliyon, 2022 n-pentane catalytic cracking was studied over a series of MFI zeolites with varying SiO2/Al2O3 ratios (30, 80, 280, 500, and 1500) using a fixed-bed reactor operated at temperature 550–650 °C.
Ziyauddin S. Qureshi +5 more
doaj +1 more source
Egyptian Journal of Petroleum, 2014 A series of dealuminated Y-zeolites impregnated by 0.5 wt% Pt catalysts promoted by different amounts of Ni, Pd or Cr (0.3 and 0.6 wt%) were prepared and characterized as hydrocracking catalysts. The physicochemical and structural characterization of the
S.A. Hanafi +4 more
doaj +1 more source