Results 1 to 10 of about 70 (66)
Phase Change Materials (PCMs) Integrated Into Transparent Building Elements: A Review [PDF]
Phase change materials (PCMs) represent an innovative solution that can contribute to the improvement of the energy performance of buildings. Recently a trend towards integrating PCMs into transparent envelope components is observed. This study aims to present the main solutions proposed in the literature for applications in the past few years for PCMs
Angeliki Kylili +2 more
exaly +3 more sources
Thermal Storage of Nitrate Salts as Phase Change Materials (PCMs) [PDF]
This study presents the energy storage potential of nitrate salts for specific applications in energy systems that use renewable resources. For this, the thermal, chemical, and morphological characterization of 11 samples of nitrate salts as phase change materials (PCM) was conducted.
Marco A. Orozco +4 more
openaire +3 more sources
Latent Heat Storage with Phase Change Materials (PCMs) [PDF]
Latent heat thermal energy storage with phase change materials (PCMs) is attractive since providing a high energy density storage due to the phase change by solidification/melting at constant temperature. Relative to sensible heat energy storage systems, latent heat storage with PCMs requires a smaller weight and volume of material for a given amount ...
Zhang H. +3 more
openaire +2 more sources
Free Cooling with Phase Change Materials (PCM) [PDF]
Phase change materials (PCM) are described along with some of their advantages in air conditioning installations, particularly with regard to taking advantage of the free cooling that can be obtained from the ambient air, by using either sensible heat or evaporation.
M* Domínguez, C. García, J.M. Arias
openaire +1 more source
Granulation Of Porous Materials with Phase Change Material (PCM)
The paper describes the research on the method of production of granulated phase-change materials (PCM) used in construction industry for the accumulation of thermal energy. As mineral materials for the granules preparation zeolite from fly ash Na-P1 and natural diatomite dust were used which were impregnated with paraffinic filtration waste and ...
openaire +3 more sources
In this study, n-dodecanol and 1-tetradecanol were nanoencapsulated by poly(methyl metharcylate-co-methacrylic acid) (p(MM-co-MA)) wall using emulsion polymerization method which was defined as one-stage (OS) or two-stage (TS). Nanocapsules were analyzed by Fourier-transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM ...
Simge ÖZKAYALAR, Sennur ALAY AKSOY
openaire +6 more sources
Methods for Determining the Thermal Transfer in Phase-Changing Materials (PCMs)
A very important issue that needs to be solved as simply and correctly as possible is how to establish the thermal performance of phase-changing materials (PCM). The undertaken researches have analyzed the values of the thermal performances of the PCM taking into account the method of finite elements and the experimental research, respectively, based ...
Vasile Bendic +5 more
openaire +2 more sources
Compatibility of plastic with phase change materials (PCM)
Even though paraffin interactions with plastics are known by industry, plastics are commonly proposed as container materials for encapsulating phase change materials (PCM) in many applications. In the literature, there are very few experimental studies of organic PCM migration in plastics and its effects on plastic properties.
Castellón, Cecilia +4 more
openaire +2 more sources
Solar Drying System Integrated with Phase Change Material PCM
The post-harvest losses for agricultural products are around 30%-40% [1]. Drying is a one of the necessary processes for the preservation of agricultural products. Agricultural products require hot air of temperature above 40 ºC for drying. Open sun drying takes more time for drying of products due to slower drying rates.
S. P. Salve +2 more
openaire +1 more source
Heat transfer analysis for phase change materials (PCMs) [PDF]
The heat transfer enhancement for phase change materials (PCMs) has received much attention nowadays, since most of PCMs have low thermal conductivities which prolong the charging and discharging processes. Metal foams, as a sort of novel material with relatively high thermal conductivity, are believed to be a promising solution to enhance heat ...
Tian, Y. (Yuan), Zhao, Changying
openaire +3 more sources

