Results 31 to 40 of about 344,780 (314)

Practical Enhancements in Current Density and Power Generation of Bifacial Semitransparent Ultrathin CIGSe Solar Cells via Utilization of Wide Bandgap Zn‐Based Buffer

open access: yesAdvanced Science, 2022
Among many building‐integrated semitransparent photovoltaics (BISTPVs), semitransparent ultrathin (STUT) Cu(Inx,Ga1‐x)Se2 (CIGSe) solar cells are distinguishable due to their potential high power conversion efficiency (PCE) among other thin‐film solar ...
Dongryeol Kim   +8 more
doaj   +1 more source

Near‐Infrared Materials: The Turning Point of Organic Photovoltaics

open access: yesAdvances in Materials, 2021
Near‐infrared (NIR)‐absorbing organic semiconductors have opened up many exciting opportunities for organic photovoltaic (OPV) research. For example, new chemistries and synthetical methodologies have been developed; especially, the breakthrough Y‐series
Dong Meng   +5 more
semanticscholar   +1 more source

Indoor photovoltaics awaken the world’s first solar cells

open access: yesScience Advances, 2022
Selenium (Se) solar cells were the world’s first solid-state photovoltaics reported in 1883, opening the modern photovoltaics. However, its wide bandgap (~1.9 eV) limits sunlight harvesting.
Binghai Yan   +9 more
semanticscholar   +1 more source

Minimizing the Cycle Time for a Rapid Quantum Efficiency Measurement by Modulating Multiple Channels of LED Solar Simulators

open access: yesSiliconPV Conference Proceedings
LED-based solar simulators have been shown to provide many advantages compared to Xenon-based flashers in particular regarding the flexibility of the spectrum, flash duration and illumination intensity.
Manuel Meusel   +2 more
doaj   +1 more source

Spin-coated planar Sb2S3 hybrid solar cells approaching 5% efficiency

open access: yesBeilstein Journal of Nanotechnology, 2018
Antimony sulfide solar cells have demonstrated an efficiency exceeding 7% when assembled in an extremely thin absorber configuration deposited via chemical bath deposition.
Pascal Kaienburg   +2 more
doaj   +1 more source

Perovskite-perovskite tandem photovoltaics with optimized band gaps [PDF]

open access: yesScience, 2016
Tandem perovskite cells The ready processability of organic-inorganic perovskite materials for solar cells should enable the fabrication of tandem solar cells, in which the top layer is tuned to absorb shorter wavelengths and the lower layer to absorb ...
G. Eperon   +26 more
semanticscholar   +1 more source

Influence of Temperature and Electrolyte Composition on the Performance of Lithium Metal Anodes

open access: yesBatteries, 2021
Lithium metal anodes have again attracted widespread attention due to the continuously growing demand of cells with higher energy density. However, the lithium deposition mechanism and the affecting process of influencing factors, such as temperature ...
Sanaz Momeni Boroujeni   +3 more
doaj   +1 more source

Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics

open access: yesScience, 2019
Optimizing surface passivation Unproductive charge recombination at surface defects can limit the efficiency of hybrid perovskite solar cells, but these defects can be passivated by the binding of small molecules. Wang et al.
Rui Wang   +16 more
semanticscholar   +1 more source

Extremely Long Electron Lifetime in Spontaneously Passivated Polycrystalline Perovskite Layers via Illumination‐Assisted Trap Filling

open access: yesAdvanced Functional Materials, EarlyView.
ABSTRACT Perovskite solar cells (PSCs) are promising next‐generation photovoltaics. The high performance of PSCs is attributed to the long carrier lifetimes of perovskite photoabsorbers. However, the carrier lifetimes of polycrystalline perovskite layers, which serve as the photoabsorbers in practical PSCs, have remained limited to several tens of ...
Naoyuki Nishimura   +2 more
wiley   +1 more source

Material screening for the development of a photovoltaic module using biodegradable materials from renewable raw materials

open access: yesEPJ Photovoltaics
The development of photovoltaic (PV) modules made of bio-degradable materials from renewable resources offers numerous advantages. It reduces the ecological footprint of the photovoltaic industry and promotes its sustainability.
Pander Matthias   +3 more
doaj   +1 more source

Home - About - Disclaimer - Privacy