Mokslas: Lietuvos Ateitis, 2016 In this article jacked pile installation technology and its current processes, altering the base physical and mechanical characteristics are discussed. For the jacked pile static load test simulation Plax 3D software was selected, the opportunities and ...
Tautvydas Statkus
doaj +3 more sources
3D Modeling on Slope Stability Using Gabion Reinforcement with Finite Element-Based Plaxis 3D
Media Komunikasi Teknik Sipil, 2023 The slope is a surface that lies at an angle to the horizontal. If the driving force at the slope is bigger than the resisting force, it can inflict a landslide.
Indra Noer Hamdhan, Emilia Eliza
doaj +2 more sources
Analysis of Embankment Supported by Rigid Inclusions Using Plaxis 3D
Acta Technica Jaurinensis, 2021 A rigid inclusion-supported embankment is used to overcome the problems of soft soils. This system is considered complex due to the various interactions between its elements, namely the embankment body, load transfer platform, geogrid layers, piles, and ...
Rashad Alsirawan
doaj +3 more sources
Analysis on Laterally Loaded Group Piles by Plaxis 3D Foundation
ComTech, 2011 It has been known that a group pile lateral capacity is smaller than the sum of each pile capacity composing the group. A reduction factor, also known as efficiency factor, is required to determine the effective lateral capacity of group piles.
Sri Dewi, Gouw Tjie Liong
doaj +3 more sources
Geotechnical modelling and subsurface analysis of complex underground structures using PLAXIS 3D
International Journal of Geo-Engineering, 2022 In this study, analysis of complicated underground structure of Horemheb tomb (KV57) at Luxor, Egypt by using the software PLAXIS 3D is adopted and the deformation that occurs in the body of the underground structure after applied the failure load ...
Sayed Hemeda
doaj +2 more sources
Numerical Simulation and Deformation Prediction of Deep Pit Based on PSO-BP Neural Network Inversion of Soil Parameters [PDF]
SensorsThe finite element numerical simulation results of deep pit deformation are greatly influenced by soil layer parameters, which are crucial in determining the accuracy of deformation prediction results.
Qingwang Li, Feng Cheng, Xinran Zhang
doaj +2 more sources
Analysis of Lightweight Concrete “Cakar Ayam” Foundation for Road Construction using Plaxis 3D Foundation Software [PDF]
Applied Mechanics and Materials, 2014 Road settlement often occurs because that soil cannot accommodate the load capacity. Therefore, the study to analysis of lightweight concrete “cakar ayam” foundation was conducted. The idea of “cakar Ayam” concept was introduced by Prof. Dr. Ir. Sediyatmo. Objective of these studies was achieved which is to determine the settlement value of lightweight
Ahmad Hakimi Mat Nor +2 more
core +3 more sources
Implementation of a Stress-dependent Strength Material Model in PLAXIS 3D [PDF]
, 2013 To perform tests on bucket foundations, full-scale testing is rarely used since it is rather expensive. Instead small-scale testing is done to examine the static and dynamic behaviour of such structures. In the laboratory at Aalborg University, small-scale testing of offshore support structures can be performed in a pressure tank, where a pressure can ...
Knudsen, Bjørn S. +2 more
openaire +3 more sources
PLAXIS 3D numerical analysis of complex geotechnical problems of colossal built heritage
Heritage ScienceThe paper aims to contribute to the preservation of high valuable historic masonry structures and historic urban landscapes through the combination of geotechnical, structural engineering.
Sayed Hemeda
doaj +2 more sources
IMPROVEMENT OF PIPELINE SETTLEMENT USING MICROPILES [PDF]
JES: Journal of Engineering Sciences, 2022 IMPROVEMENT OF PIPELINE SETTLEMENT USING MICROPILESABSTRACTLoose sand soil is one of the problematic soils and according to that, buried pipelines interact with the loose sand soil.
Nasser Ahmed Abdelgawad Radwan
doaj +1 more source