Results 61 to 70 of about 738 (181)

Contact stresses on the rake face of cutting tools with PCBN in turning of hardened steel [PDF]

Журнал інженерних наук, 2017
The paper presents the results of experimental study of determination of the geometric parameters of the contact zone of the chips with the rake face of cutting tools, as well as the shrinkage of chips during the final turning of hardened HVG steel by ...
S. A. Klimenko, S. An. Klimenko, A. S. Manokhin, Yu. A. Mel’nichuk, M. Yu. Kopіeikina, A. A. Chumak   +5 more
doaj  

Effect of binder content on microstructure and mechanical properties of PcBN composites [PDF]

Processing and Application of Ceramics
In this study, polycrystalline cubic boron nitride (PcBN) composites were successfully prepared under ultrahigh pressure (5.5GPa) and high temperature (1500 °C) by using cBN as precursor and TiC, Ti and Al as binders.
Mo Peicheng, Yu Wenlin, Cheng Jiarong, Sun Yuan, Wang Peixun, Li Huixia, Yang Yufu, Cheng Chao   +7 more
doaj   +1 more source

Thin Fluoride Insulators for Improved 2D Transistors: From Deposition Methods to Recent Applications

physica status solidi (RRL) – Rapid Research Letters, Volume 20, Issue 7, July 2026.
2D materials hold significant promise for next‐generation electronic and optoelectronic devices, but suitable gate dielectrics are still a challenge. Fluoride insulators, offering inert, dangling‐bond‐free surfaces, have recently emerged as strong candidates. This review covers recent publications on high‐quality fluoride thin‐film deposition and their
Behzad Dadashnia, Saeed Rasouli, Walter M. Weber, Daniele Nazzari   +3 more
wiley   +1 more source

MXene/PEDOT Functional Coatings on Flexible Microelectrode Arrays for Multianalyte In Vivo Neurochemical Sensing and Electrophysiology

Advanced Functional Materials, Volume 36, Issue 46, 8 June 2026.
A MXene/PEDOT coating enables multimodal functionality and dual‐analyte detection of dopamine and serotonin in flexible microelectrode arrays while enhancing electrophysiological recording quality. The anti‐fouling, low‐impedance interface overcomes key limitations of conventional coatings, providing a robust and versatile platform to investigate the ...
Ilaria Gatti, Karamullah Eisawi, Umisha Siwakoti, Greyson Jadwin, Ashmita Sigdel, Michela Chiappalone, Deepak Kumbhare, Michael Naguib, Elisa Castagnola   +8 more
wiley   +1 more source

Effects of tool material on the machinability of titanium (Grade-5) alloy by using RSM [PDF]

International Journal of Advanced Design and Manufacturing Technology, 2013
This paper presents the findings of experimental investigations into the effects of cutting speed, feed rate, depth of cut and approach angle on the machinability of titanium (Grade-5) alloy.
kali Dass
doaj  

Cutting Performance and Wear/Damage Characteristics of PCBN Tool in Hard Milling

Applied Sciences, 2019
In the intermittent machining of hardened steel for the die and mold industry, determining how to reduce the wear of PCBN (Polycrystalline Cubic Boron Nitride) tools and improve their machining efficiency and quality is an important subject.
Haining Gao, Xianli Liu, Zhitao Chen
doaj   +1 more source

Machining Simulation of Recrystallized SiC: Failure Mechanisms, Numerical Influences, Tool Dynamics, and Friction Behavior

Journal of the American Ceramic Society, Volume 109, Issue 6, June 2026.
ABSTRACT This paper presents a comprehensive study on the machining simulation of recrystallized silicon carbide (R‐SiC), with a focus on material failure mechanisms, numerical influences, tool kinematics, and frictional behavior. A representative volume of interest was derived from CT data, and a meshing algorithm for CT‐based structures was ...
Simon Unseld, Stefan Kleiner, Achim Rösiger, Ralf Goller, Dietmar Koch   +4 more
wiley   +1 more source

Recent Developments in Deep‐Ultraviolet Flat Optics

Nanophotonics, Volume 15, Issue 10, 27 May 2026.
Deep‐ultraviolet flat optics (DUVFO) is emerging as a key platform for next‐generation photonics, enabling advanced functionalities beyond conventional DUV optics. This review outlines materials, devices, and system advances, highlighting wide‐bandgap platforms, while identifying key challenges in dispersion control, characterization, and wafer‐scale ...
Omar A. M. Abdelraouf, Tao Wang, Zeng Wang   +2 more
wiley   +1 more source

Fabrication of Polycrystalline Cubic Boron Nitride/Metal Composite Particles by Surface Metallization Followed by Electroless Deposition Technique. [PDF]

Materials (Basel), 2021
Mohamed Daoush W, Saad Alkhuraiji T, Alshammri AD.   +2 more
europepmc   +1 more source

Reaction sintering of polycrystalline cubic boron nitride at high pressure and temperature.

Journal of the Japan Society of Powder and Powder Metallurgy, 1989
Single phase sintered compact of cBN (polycrystalline cBN) may be prepared under high pressure and temperature (>5.2GPa, >1350°C) from hBN compact carrying a small amount of Mg3BN3 as a catalyst. This work investigated the influence of the amount of Mg3BN3 added to the hBN compact on the microstructure and the thermal conductivity of the prepared ...
Sumiya, Hitoshi, Tsuji, Kazuo, Yazu, Shuji   +2 more
openaire   +2 more sources