Results 211 to 220 of about 7,225 (255)
Some of the next articles are maybe not open access.
The Polymer in Polymer Flooding: Is its Value Overestimated?
SPE Heavy Oil Conference-Canada, 2014Abstract Reservoir recovery processes are complex and typically entail several physical or chemical mechanisms. Polymer flooding has often been depicted to be dominated by one mechanism: water viscosification reduces the mobility ratio, and stabilizes the displacement front to increase oil recovery.
P. San Blas, E. Vittoratos
openaire +1 more source
ASP Flood After a Polymer Flood vs. ASP Flood After a Water Flood
SPE Improved Oil Recovery Conference, 2018Abstract Alkaline-surfactant-polymer (ASP) flooding is an effective technique to improve oil recovery. It has been applied typically after a water flood. Recently, there has been a successful field test where an ASP flood was conducted after a polymer flood.
Almas Aitkulov +2 more
openaire +1 more source
Polymer Flooding In Stratified Cores
Annual Technical Meeting, 1984Abstract The effectiveness of any enhanced oil recovery process is influenced by the mixing of injected and reservoir fluids since the oil recovery efficiency of the injected fluids usually deteriorates with dilution.
J. Novosad +2 more
openaire +1 more source
Some Aspects of Polymer Floods
Journal of Petroleum Technology, 1966Abstract Adsorption of polymers and transport, rheology and oil recovery efficiency of their solutions were studied in the laboratory to evaluate the use of polymers in waterflooding. While a tenfold mobility reduction was obtained with polymer concentrations as low as 0.05 per cent by weight, the mobility reduction
N. Mungan, F.W. Smith, J.L. Thompson
openaire +1 more source
Numerical Simulation of Polymer Flooding
SPE Russian Petroleum Technology Conference, 2020Abstract Many factors affect the efficiency of polymer flooding, but the key is polymer adsorption on the rock. The analysis of the main methods of experimental elaboration of uncertainties associated with the estimation of adsorption on micromodels is carried out in this article.
Elina Mirsayanova +4 more
openaire +1 more source
Proceedings, 2013
Low salinity waterflooding has received increasing attention. However, the increased oil recovery by low salinity is in most cases very limited. Combining low salinity with other EOR methods has been our focus in recent years. The combined effect of brine chemistry and added surfactant on oil recovery was addressed by Alagic and Skauge in recent ...
A. Skauge, B.S. Shiran
openaire +1 more source
Low salinity waterflooding has received increasing attention. However, the increased oil recovery by low salinity is in most cases very limited. Combining low salinity with other EOR methods has been our focus in recent years. The combined effect of brine chemistry and added surfactant on oil recovery was addressed by Alagic and Skauge in recent ...
A. Skauge, B.S. Shiran
openaire +1 more source
Prediction of Polymer Flood Performance
Society of Petroleum Engineers Journal, 1971Patton, J.T., Member AIME, Patton, J.T., Member AIME, Computer/Bioengineering Institute, Inc., Houston, Tex. Coats, K.H., Member AIME, International Computer Applications Ltd., Houston, Tex. Colegrove, G.T., Kelco Co., Houston, Tex. Abstract This experimental and numerical study was performed to ...
J.T. Patton, K.H. Coats, G.T. Colegrove
openaire +1 more source
Fundamentals of Polymer Flooding
1984Increasing the viscosity of injected water for more efficient oil recovery has been of interest to the petroleum industry since 1900. In recent years, certain high molecular weight water soluble organic polymers have been developed which, in small concentrations, can increase the viscosity of water substantially and, under certain conditions, recover ...
openaire +1 more source
Introduction to polymer flooding
1991In the very early days of the oil industry, the general practice in land-based shallow reservoirs was to produce oil by primary depletion. In this method, the compressional energy of the reservoir was used to force oil to the producer wells, with a consequent drop in the reservoir pressure.
openaire +1 more source
Environmental Consequences of Polymer Flooding
Proceedings, 2017Worldwide polymer flooding (PF) is being introduced as a viable option for increasing recovery rates. In PF projects, back-produced polymer are ideally disposed of by reinjection or injection to a deposit well. However, significant challenges with offshore produced polymer water management creates possibilities for intermittent overboard discharge.
E.O. Opsahl, R.K. Kommedal
openaire +1 more source

