Results 161 to 170 of about 38,631 (210)
Some of the next articles are maybe not open access.
Pyrolysis of polyolefin elastomers
British Polymer Journal, 1976Commercial samples of two ethylene—propylene terpolymers (EPDM), two isobutene— isoprene copolymers (IIR), one polyisobutene (PIB) and one chlorosulphonated polyethylene (CSPE) were pyrolysed at temperatures between 770 and 1370 K in a quartz micro-furnace.
Derek A. Smith, J. W. Youren
openaire +1 more source
Laser welding of polyolefin elastomers to thermoplastic polyolefin
ICALEO 2003: 22nd International Congress on Laser Materials Processing and Laser Microfabrication, 2003Polyolefin elastomers (POEs) are used in stand-alone applications or as impact modifiers for thermoplastic polyolefins (TPO). The weldability of POEs to TPO is an important consideration for their incorporation into automotive products and so a study was performed to assess their weldability using through-transmission laser welding (TTLW).
D. Mark Douglass, Chung-Yuan Wu
openaire +1 more source
Polymer Blends Based on Polyolefin Elastomer and Polypropylene
Journal of Applied Polymer Science, 1997A new family of homogeneous polyolefin polymers that exhibit unique molecular and rheological properties designated polyolefin elastomers (POEs) are characterized by a narrow molecular weight and high degrees of comonomer distribution. Because these copolymers are often elastomeric in nature, one of the uses for these materials is as impact properties ...
Maria Inês Bruno Tavares +2 more
exaly +2 more sources
Direct Synthesis of Polar-Functionalized Polyolefin Elastomers
Angewandte Chemie - International EditionAbstract Polyolefin elastomers (POEs) are widely used for many applications including plastic toughening and encapsulating photovoltaic modules. The introduction of polar groups into POEs improves their compatibility and adhesion with polar components, but it is challenging to prepare high‐molecular‐weight polar ...
Chen Zou, Changle Chen
exaly +3 more sources
Macromolecular Research, 2010
The effect of incorporating a hydrogenated polybutadiene segment (HPB) in a thermoplastic polyurethane elastomer (TPU) on the compatibility of TPU with a thermoplastic polyolefin elastomer (TPO) was examined. Scanning electron microscopy showed that the particle size of the dispersed phase in the TPU/TPO blends decreased with increasing HPB ...
Tae Kyoon Kim +5 more
openaire +1 more source
The effect of incorporating a hydrogenated polybutadiene segment (HPB) in a thermoplastic polyurethane elastomer (TPU) on the compatibility of TPU with a thermoplastic polyolefin elastomer (TPO) was examined. Scanning electron microscopy showed that the particle size of the dispersed phase in the TPU/TPO blends decreased with increasing HPB ...
Tae Kyoon Kim +5 more
openaire +1 more source
Polyolefin Elastomers Based on Ethylene and Propylene
Rubber Chemistry and Technology, 1972Abstract In 1940, the first all-hydrocarbon elastomer containing limited olefinic functionality, butyl rubber, was announced. Because of its resistance to em-brittlement on aging, cracking on exposure to ozone, its impermeability to gases, and high damping capacity, this elastomer found use in inner tubes, cable insulation and miscellaneous ...
F. P. Baldwin, G. Ver Strate
openaire +1 more source
Reactive Polyolefin Elastomer/Polypropylene Blends
Journal of Polymer Engineering, 2006Reactive modification of polyolefin elastomer/polypropylene (PP) blends using an organic peroxide initiator is investigated. In the presence of a polyolefin elastomer matrix the crosslinking reaction dominates over the degradation of PP. Partition of the peroxide in the two phases and crosslink density depend highly on the method of incorporation of ...
Zuning Li, Marianna Kontopoulou
openaire +1 more source
Functionalization of polyolefins and elastomers with an oxazoline compound
Journal of Applied Polymer Science, 1999The aim of this work was to graft ricinoloxazoline maleinate (OXA) onto polyethylene (PE), and onto an ethylene propylene copolymer (E/P) and styrene ethylene/butylene styrene copolymer (SEBS), by melt free radical grafting in a twin-screw midiextruder.
U. Anttila, C. Vocke, J. Sepp�l�
openaire +1 more source
Physical characterization of a polyolefinic thermoplastic elastomer
Polymer, 1998Physical characterization of a commercial polyolefinic thermoplastic elastomer (TPE), Santoprene®, was undertaken to understand the elastomeric nature of the two-phase material in which rubber particles are dispersed in a matrix of polypropylene (PP). Dynamic mechanical analysis showed that the PP matrix contains a small amount of rubber.
Ying Yang +3 more
openaire +1 more source
New polyolefin elastomers from metallocenes
Macromolecular Symposia, 1995AbstractIn this paper, new polyolefin elastomers, obtained from metallocene based catalytic systems, are presented. The potentialities of metallocenes for the preparation of polyolefin elastomers are discussed with reference to the traditional vanadium and titanium based catalysts. The role played by a Ziegler ‐ Natta catalyst, either stereospecific or
GALIMBERTI, MAURIZIO STEFANO +6 more
openaire +1 more source

