Results 91 to 100 of about 295,461 (303)

Smart and Sustainable Sizing: Investigating the Sensing Behavior of Glass Fabrics Coated With Waterborne Polyurethane/Graphene Dispersions

Advanced Materials Technologies, EarlyView.
Waterborne polyurethane/graphene formulations are developed as piezoresistive coatings on glass fabric to enable flexible strain sensing. The graphene‐enabled conductive network provides a stable electromechanical response under cyclic compression. The coating demonstrates reliable pressure‐dependent resistance changes, highlighting its potential for ...
Vishnu Vijayan Pillai, Premika Govindaraj, Sai Aditya Pradeep, Olivia Sequerth, Srikanth Pilla, Franz Konstantin Fuss, Peter Kingshott, Nishar Hameed, Nisa V Salim   +8 more
wiley   +1 more source

Experimental and numerical analysis of polyurethane spraying materials as a compressible layer in deep soft rock tunnels

Journal of Rock Mechanics and Geotechnical Engineering
Polyurethane foam, when used as a compressible layer in deep soft rock tunnels, offers a feasible solution to reduce the support pressure on the secondary lining.
Haibo Wang, Fuming Wang, Tongming Qu, Jun Liu, Lei Qin, Chengchao Guo   +5 more
doaj   +1 more source

3D Printing of Stretchable, Compressible and Conductive Porous Polyurethane for Soft Robotics

Advanced Materials Technologies, EarlyView.
A 3D‐printable porous dopamine‐polyurethane acrylate elastomer results in conductive, stretchable, and compressible structures that can be metallized in situ through catechol‐mediated silver reduction. The resulting material function as both compliant soft robot with a and strain sensors without complex assemblies, enabling fully 3D‐printed soft ...
Ouriel Bliah, Konstantin Sakharov, Pooi See Lee, Shlomo Magdassi   +3 more
wiley   +1 more source

Hierarchical Multi‐Material Architectures With Gradient Design for Dynamic‐Range Flexible Tactile Sensing

Advanced Materials Technologies, EarlyView.
Hierarchical multi‐material TPMS lattices are engineered as flexible tactile sensors by combining soft and stiff elastomeric layers with a conformal conductive coating. The bilayer architecture delivers sensitivity at low pressures while maintaining a broad detectable range under large loads, enabling reliable pressure and vibration monitoring for ...
Reza Noroozi, Domenic Quiquero, Yan Yan Shery Huang, HaoTian Harvey Shi   +3 more
wiley   +1 more source

Water transport mechanism and performance evaluation in polyurethane materials: A state-of-the-art review

Polymer Testing
In environments with high humidity or water exposure, the performance of polyurethane materials could be adversely affected by water and its penetration, which could compromise their long-term utility.
Cuixia Wang, Zihan Xu, Yangyang Xia, Chao Zhang, Hongyuan Fang, Kangyan Sun   +5 more
doaj   +1 more source

Stretchable and Strain‐Tolerant Gold‐Coated Fibrous Biosensor for Superoxide Anion Monitoring

Advanced Materials Technologies, EarlyView.
A breathable, stretchable gold nanomesh–TPU fiber platform is developed via controlled electroless deposition, enabling uniform through‐thickness conductivity while preserving porosity. Functionalized with superoxide dismutase, the system achieves selective, real‐time electrochemical detection of superoxide with high sensitivity, mechanical durability,
Jafar M. Batayneh, Ahyeon Koh
wiley   +1 more source

Experimental and Numerical Analysis of the Impact Resistance of Polyurethane Foam Aluminum-Concrete Sandwich Structures

Buildings
The objective of this research paper is to examine the shock-absorption capabilities of sandwich structures that utilize polyurethane foam and aluminum as energy-absorbing materials.
Yong Zhang, Fenfang Yin, Junwei Ma
doaj   +1 more source

Flexible Pressure Sensor With Co‐Optimized Sensitivity and Linearity Based on Gradient Toroidal Microstructures

Advanced Materials Technologies, EarlyView.
A flexible piezoresistive pressure sensor with gradient toroidal CNT/PDMS microstructures is reported. The hierarchical geometry enables sequential electrode contact, achieving a sensitivity of 256.20 kPa−1 and linear response (R2 = 0.99) over 0–1000 kPa.
Rongmei Wang, Ruolin Liu, Ming Lei, Yifan Liu, Fengming Hu, Bing Ji, Chao Peng, Jianyi Luo, Bingpu Zhou   +8 more
wiley   +1 more source

Fully Printed Electrocaloric Heat Pump

Advanced Materials Technologies, EarlyView.
A system based on a flexible printed PEDOT:PSS/P(VDF‐TrFE‐CFE) electrocaloric membrane. The membrane periodically alternates between the cold and hot sides following its electrocaloric cycle and successfully generates a temperature difference. The entire fabrication process is industrially scalable, cost‐effective, and based on widely accessible ...
Adrian Agreda, Florian Le Goupil, Guillaume Payrot, Sokha Khiev, Jean‐David Isasa, Wiljan Smaal, Guillaume Fleury, Georges Hadziioannou   +7 more
wiley   +1 more source

Progress in hydrophilic modification of medical polyurethane

Hecheng xiangjiao gongye
Polyurethane was widely used as a basic material in the medical field, but it lacked certain biocompatibility. Based on the demand of improving biocompatibility of medical polyurethane, the me?鄄chanism and practical application of hydrophilic coating ...
FU Yuchen1, ZHANG Chen1, ZHI Shudi1, YUAN Kunshan1, ZHAO Yanwei1, ZHANG Haijun1,2
doaj   +1 more source