Results 141 to 150 of about 529 (180)

Recycling of polished tile waste as a main raw material in porcelain tiles

Journal of Cleaner Production, 2016
Abstract The manufacture of traditional porcelain tiles is often associated with a large amount of ceramic wastes during the polishing stage. These wastes need to be properly handled due to the corresponding environment problems. This paper aims to evaluate the possibility of reusing the polished tile waste as a main raw material to produce porcelain
Shanjun Ke, Yanmin Wang, Zhidong Pan, Chengyun Ning, Shulong Zheng   +4 more
openaire   +1 more source

Influence of Strengthening Components on Industrial Mixture of Porcelain Stoneware Tiles

Key Engineering Materials, 2004
A typical industrial formulation for porcelain stoneware tiles was modified by adding synthetic mullite, and mullite-precursors, such as kaolin and gibbsite in order to enhance the mechanical properties by increasing the mullite content. The change in the physical properties as well as the technological and mechanical behaviour were evaluated on the ...
C Zanelli, M Dondi, G Guarini, M Raimondo, I Roncarati   +4 more
openaire   +4 more sources

PORCELAINIZED STONEWARE TILE

1995
Dense, low-porosity, small-pore-size tile can be manufactured from kaolin clays at maximum firing temperatures. The unglazed porcelainized stoneware tile can be used for exterior applications and as frost-resistant materials.
MANFREDINI, Tiziano, PELLACANI, Gian Carlo, ROMAGNOLI, Marcello, PENNISI L.   +3 more
openaire   +1 more source

Delayed curvature and residual stresses in porcelain tiles

Journal of the European Ceramic Society, 2013
Abstract Most industrial porcelain tiles suffer changes in their curvature after firing: such process is known as delayed curvature. One of the hypotheses used to explain this phenomenon is based on the relaxation of residual stresses by creep. In this study two types of industrial glazed porcelain tiles have been studied.
Bannier, Emilie, García Ten, Francisco Javier, Castellano, Javier, Cantavella Soler, Vicente   +3 more
openaire   +2 more sources

Use of Ornamental Rock Waste in Porcelain Tile

Materials Science Forum, 2008
The ornamental rock industry generates huge amounts of waste in form of fine powder, demanding adequate alternatives for its final disposal. The possibility of using ornamental rock waste as a flux in porcelain tile has been assessed. The porcelain tile formulations are constituted mainly by kaolin, feldspar and quartz. The waste was added to a typical
A.J. Souza, Bruno C.A. Pinheiro, S.J.G. Sousa, J.N.F. Holanda   +3 more
openaire   +1 more source

Elastic properties of porous porcelain stoneware tiles

Ceramics International, 2017
Abstract Porcelain stoneware tiles are industrially processed by using high sintering temperatures and fast firing cycles that result in products characterized by an almost impervious surface layer surrounding a rather porous bulk material. Since mechanical properties are affected by porosity, the knowledge of the material stiffness is an important ...
Rambaldi, Elisa, Pabst, Willi, Gregorová, Eva, Prete, Francesca, BIGNOZZI, MARIA   +4 more
openaire   +2 more sources

A study on porcelain anti slip tile design

2011 IEEE Colloquium on Humanities, Science and Engineering, 2011
Literally, the application of corundum as an agent of hardness to glaze surface are determined to the hardness of the glaze properties itself. Corundum reacts as a coating agent that allowing surface roughness rating increase. Alumina is a compound with melting point of about 2,000 °C and sp. gr.
V. V. Vermol, K. Kamsah, O. H. Hassan, R. Anwar   +3 more
openaire   +1 more source

Chromite as a Pigment for Fast-Fired Porcelain Tiles

2008
In this paper the authors report the main characteristic of inorganic pigment used to color industrial ceramic ...
BONDIOLI, Federica, FERRARI, Anna Maria, LEONELLI, Cristina, MANFREDINI, Tiziano   +3 more
openaire   +4 more sources

Curvature Evolution of Porcelain Tile during Firing

Materials Science Forum, 2015
Planarity is one of indispensable attribute of a ceramic tile quality. During the firing changes on curvature may be permanent causing damage on quality and productivity. The objective was to evaluate curvature evolution on porcelain tile during heating stage of firing. Effects of engobe and glaze coating were evaluated.
Patrick Henrique, Augusto Wanderlind, Agenor de Noni   +2 more
openaire   +1 more source

Solar cells on porcelain stoneware tiles

2006
Porcelain stoneware tilesare getting a prominent role on the market offering excellent solution either for interiors or for exteriors construction for flooring and coverings. This ceramic material meets the basic requirements to be compatible with different semiconductor deposition technique. Based on these consideration we investigated the possibility
IENCINELLA, DANIELE, CENTURIONI, EMANUELE, A. Salomoni, B. Mazzanti, M. G. Busana, FREGNI, ALBERTO, FAZIO, SANDRA   +6 more
openaire   +3 more sources