Results 1 to 10 of about 1,504,487 (204)

High-Entropy Alloys Fabricated via Powder Metallurgy. A Critical Review

Powder Metallurgy, 2019
High-entropy alloys (HEAs) have attracted a great deal of interest over the last 14 years. One reason for this level of interest is related to these alloys breaking the alloying principles that have been applied for many centuries.
Paula Alvaredo, José Manuel Torralba, Andrea García-Junceda   +2 more
exaly   +2 more sources

Powder Metallurgy of Titanium – Past, Present, and Future

International Materials Reviews, 2018
Powder metallurgy (PM) of titanium is a potentially cost-effective alternative to conventional wrought titanium. This article examines both traditional and emerging technologies, including the production of powder, and the sintering, microstructure, and ...
James D Paramore, Zhigang Zak Fang, Pei Sun   +2 more
exaly   +2 more sources

Core-shell structure and domain engineering in Bi0.5Na0.5TiO3-based ceramics with enhanced dielectric and energy storage performance

Journal of Materiomics, 2023
Core–shell structured Bi0.5Na0.5TiO3KTaO3 + x% (in mass) Li2CO3 ceramics were fabricated in this study. Increasing x from 0 to 2 leads to the decrease of sintering temperature from 1 175 °C to 1 020 °C.
Guoliang Xue, Xuefan Zhou, Yingchun Su, Lin Tang, Jinzhu Zou, Dou Zhang   +5 more
doaj   +1 more source

Synthesis of an Aluminum Alloy Metal Matrix Composite Using Powder Metallurgy: Role of Sintering Parameters

Applied Sciences, 2022
Powder metallurgy-based metal matrix composites (MMCs) are widely chosen and used for the development of components in the fields spanning aerospace, automotive and even electronic components. Engineered MMCs are known to offer a high strength-to-weight (
K. C. Nayak, K. Rane, P. Date, T. Srivatsan   +3 more
semanticscholar   +1 more source

Effect of Tungsten Carbide Addition on the Microstructure and Mechanical Behavior of Titanium Matrix Developed by Powder Metallurgy Route

Advances in Materials Science and Engineering, 2022
The ambition of this research work is to evaluate the hardness and wear behavior of titanium alloy reinforced with tungsten carbide particle (WC) composite prepared by powder metallurgy route.
Venkatesan Govindarajan, R. Sivakumar, P. Patil, S. Kaliappan, T. C. A. Kumar, M. Kannan, B. Ramesh   +6 more
semanticscholar   +1 more source

Design of In Situ Metal Matrix Composites Produced by Powder Metallurgy—A Critical Review

Metals, 2022
In situ composite manufacture is an approach to improve interfacial adhesion between matrix and reinforcements, in which reinforcements are synthesized along composite processing itself. In situ powder metallurgy route, in particular, offers alternatives
Isadora Schramm Deschamps, Daniel dos Santos Avila, Enzo Vanzuita Piazera, Robinson Carlos Dudley Cruz, C. Aguilar, A. Klein   +5 more
semanticscholar   +1 more source

Perforation Characteristics of Three-Layer Steel Plates Subjected to Impact with Different Shapes and Velocities of Reactive Fragments

Applied Sciences, 2023
In this paper, the AUTODYN/Smoothed Particle Hydrodynamics (SPH) method was used to study the impact of reactive fragments on three-layer equidistant steel plates.
Huanteng Sun, Yunzhu Ma, Qingshan Cai
doaj   +1 more source

High-Throughput Screening of Optimal Process Parameters for PVD TiN Coatings With Best Properties Through a Combination of 3-D Quantitative Phase-Field Simulation and Hierarchical Multi-Objective Optimization Strategy

Frontiers in Materials, 2022
Physical vapor deposition (PVD) is one of the most important techniques for coating fabrication. With the traditional trial-and-error approach, it is labor-intensive and challenging to determine the optimal process parameters for PVD coatings with best ...
Rao Dai, Shenglan Yang, Tongdi Zhang, Jing Zhong, Li Chen, Chunming Deng, Lijun Zhang   +6 more
doaj   +1 more source

Development of Ti–Zr alloys by powder metallurgy for biomedical applications

Powder Metallurgy, 2021
Commercial pure titanium offers excellent biocompatibility, but its properties are poor for some biomedical applications where both mechanical properties and biocompatibility are required.
Angèlica Amigó-Mata, Montserrat Haro-Rodriguez, Á. Vicente-Escuder, V. Amigó-Borrás   +3 more
semanticscholar   +1 more source

Materials and technologies of powder metallurgy in components of aviation and space engineering

Весці Нацыянальнай акадэміі навук Беларусі: Серыя фізіка-тэхнічных навук, 2020
Examples of the implementation of powder metallurgy methods and their individual elements in the processes of producing materials with special properties and products thereof are considered.
A. Ph. Ilyushchanka, A. K. Kryvanos, Ya. Ya. Piatsiushyk, V. A. Osipov, S. G. Baray   +4 more
doaj   +1 more source