Results 41 to 50 of about 8,107 (260)
The silver occurrence state and process mineralogical characteristics are critical to its beneficiation process and recovery indicators, which can be used for assisting in process development, plant design, and improvement of silver recovery. In order to
Ligang WEN +4 more
doaj +1 more source
Abstract This study proposes a novel, green, and sustainable method for synthesizing magnetic iron oxides from metallurgical copper slag (CS), leveraging its iron content as a valuable resource. Iron was extracted via acid leaching using edible citric acid (ECA), forming a citrate–iron complex (CSL), which was subsequently thermally decomposed at 300°C
Melisa Portilla‐Sangabriel +4 more
wiley +1 more source
Technological Mineralogical Analysis and Flotation Test of a Refractory Lead-zinc Ore in Hebei
This is an article in the field of mineral processing engineering. The main valuable elements in a lead-zinc mine in Hebei are lead and zinc, with grades of 1.07% and 2.08%, respectively.
Guanglin QIN +4 more
doaj +1 more source
Preparation, modification, and characterization of biochar from woodchips and its application in stream water filtration, evaluated through physicochemical and microbiological analyses. Abstract Global microbial water contamination affects 1.8 billion people, necessitating efficient and sustainable treatment methods.
Tariq Khalil +8 more
wiley +1 more source
Objective The embedded granularity of target minerals refers to their particle size and distribution in ore, which directly influences the design and effectiveness of ore beneficiation processes.
Huaming TANG +8 more
doaj +1 more source
Abstract This study investigates the effect of moisture on CO2 adsorption in South African coals using both experimental and machine learning approaches. Three coal samples (SL, TN, and EM) with varying ranks (RoVmr: 3.49%, 1.26%, and 0.64%, respectively) were collected from different regions of South Africa.
Kasturie Premlall +3 more
wiley +1 more source
Technological Mineralogical Characteristics and Mineral Processing Test of Donganshan Iron Ore
This is an article in the field of mineral processing engineering. In order to accurately grasp the influence of various types of ores on field production, the process mineralogy of various types of ores was systematically and deeply studied by means of ...
Shuyong LIU +5 more
doaj +1 more source
Study on Process Mineralogy of a Tungsten Ore in Yunnan Province
By applying chemical phase analysis, mineral liberation analyzer (MLA), SEM, optical microscope and energy spectrum analysis, the mineral composition, grain size and occurrence states of valuable minerals are studied in this article, also the ...
Xingwang Zhang, Zhiyong Sun
doaj +1 more source
Lithium carbonate (Li2CO3) obtained from the black mass of recycled lithium batteries is dissolved in water under controlled conditions to remove lithium fluoride (LiF), which is present at a concentration of 3.08 % by weight. The dissolution is carried out at temperatures below 10 °C, and it has been demonstrated that lower temperatures result in ...
Laura Rosso +3 more
wiley +1 more source
Review and prospects of shear test of bolted rock joints
The laboratory shear test equipment, test method, and numerical simulation of bolted rock joints were summarized. The shortcomings and limitations of the current research were analyzed, and the research prospects were proposed. Abstract Rock bolting is a critical approach in geotechnical engineering for supporting weak rocks.
Shulin Ren +4 more
wiley +1 more source

