Passive Cooling Solutions for High Power Server CPUs with Pulsating Heat Pipe Technology: Review
Data centers are becoming more powerful and more integrated with the continuous development of smart cities, which brings us more technological convenience, but also generates a large amount of waste heat.
Chenxi Li, Ji Li
doaj +1 more source
Modeling of pulsating heat pipes. [PDF]
This report summarizes the results of a computer model that describes the behavior of pulsating heat pipes (PHP). The purpose of the project was to develop a highly efficient (as compared to the heat transfer capability of solid copper) thermal groundplane (TGP) using silicon carbide (SiC) as the substrate material and water as the working fluid.
Givler, Richard C., Martinez, Mario J.
openaire +2 more sources
New progress in the theoretical research and application of pulsating heat pipe
As a new type of heat transfer device with a unique working mechanism, the pulsating heat pipe (PHP) has high heat transfer efficiency, high resistance capability to drying out, and good environmental adaptability.
LI Qing-feng +4 more
doaj +1 more source
An experimental study on heat transfer performance of a pulsating heat pipe radiator for CPU heat dissipation [PDF]
To meet the requirement of electronic heat dissipation with high heat flux, a kind of heat dissipation device using pulsating heat pipe (PHP) for CPU heat dissipation was put forward.
Shang Fumin +4 more
doaj +1 more source
Chaotic behavior of pulsating heat pipes [PDF]
Chaotic behavior of closed loop pulsating heat pipes (PHPs) was studied. The PHPs were fabricated by capillary tubes with outer and inner diameters of 2.0 and 1.20 mm. FC-72 and deionized water were used as the working fluids. Experiments cover the following data ranges: number of turns of 4, 6, and 9, inclination angles from 5 degrees (near horizontal)
Song, Yanxi, Xu, Jinliang
openaire +2 more sources
A Novel Approach for Flow Analysis in Pulsating Heat Pipes: Cross-Correlation of Local Heat Flux
Pulsating heat pipe is a promising two-phase heat transfer device that has many advantages such as a simple wickless structure and high thermal performance.
Naoko Iwata +5 more
doaj +1 more source
Characterizing Helium Pulsating Heat Pipes
A series of experiments and modeling activities have been carried out over the past few years at the University of Wisconsin – Madison with a helium pulsating heat pipe (PHP). This report describes the results of various methods used to characterize the behavior of the PHP, including developing correlations of the heat flux q" at the evaporator end in ...
J.M. Pfotenhauer +3 more
openaire +1 more source
An Experimental Investigation of Micro Pulsating Heat Pipes [PDF]
Two Si-based micro pulsating heat pipes (µPHPs) charged using HFE-7100 were either horizontally or vertically oriented and were tested using several heating powers. The width of each channel was 0.8 mm in one µPHP containing uniform channels, and the channel width was 1.0 mm or 0.6 mm in the other µPHP, which did not contain uniform channels. The depth
Kai-Shing Yang +4 more
openaire +2 more sources
Fluid-flow pressure measurements and thermo-fluid characterization of a single loop two-phase passive heat transfer device [PDF]
A Novel Single Loop Pulsating Heat Pipe (SLPHP), with an inner diameter of 2 mm, filled up with two working fluids (Ethanol and FC-72, Filling Ratio of 60%), is tested in Bottom Heated mode varying the heating power and the orientation.
Araneo, L +7 more
core +5 more sources
Start-up and Heat Transfer Characteristics of L-shaped Pulsating Heat Pipe
In this study, an L-shaped pulsating heat pipe was proposed to address the thermal management problem of lithium-ion batteries in electric vehicles. A pulsating heat pipe has a long heating section, a short cooling section, and a short insulation section.
Chi Riguang, Guo Zirui, Gong Xujin
doaj

