Results 61 to 70 of about 23,232 (306)

Electrochemical Evaluation of Compressed Selective Laser Melted AlSi7Mg and AlSi10Mg Alloys in Chloride Environment

Advanced Engineering Materials, EarlyView.
The corrosion performance of AlSi7Mg and AlSi10Mg alloys produced through selective laser melting (SLM) was examined under compressive stress in a chloride environment. Electrochemical analyses, including open‐circuit potential (OCP), potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were complemented by scanning ...
Femi John Akinfolarin, Samson Dare Oguntuyi, Peter Apata Olubambi   +2 more
wiley   +1 more source

Innovative Processing of Compacted Waste Aluminum Alloy Powders via Controlled Remelting and Solidification

Advanced Engineering Materials, EarlyView.
This study demonstrates an efficient recycling route for out‐of‐spec AlSi10Mg atomized powders through compaction and arc remelting followed by suction casting. By correlating compaction load, cooling rate, and resulting microstructure, we show that intermediate pressures (50–80 kN) and rapid cooling refine dendrites, reduce porosity, and enhance ...
Mila Christy de Oliveira, Marcella Gaute Cavalcante Xavier, Abdoul‐Aziz Bogno, Piter Gargarella, José Eduardo Spinelli   +4 more
wiley   +1 more source

Zein‐Based Adhesives: Sustainable Extraction and Application in Bioadhesive Technologies

Advanced Engineering Materials, EarlyView.
Zein is extracted from corn gluten meal using a simple and scalable process with high yield (~90%). The resulting protein is applied in bioadhesives modified with Ca2+ and Fe3+ ions, exhibiting substrate‐dependent adhesion. The findings demonstrate competitive bonding performance and highlight the role of ionic interactions in tuning adhesion ...
Paula Bertolino Sanvezzo, Daniela Winsley Valereto Friozi, Vinícius de Oliveira, Marcia Cristina Branciforti   +3 more
wiley   +1 more source

Renewable Electric Energy Storage Systems by Storage Spheres on the Seabed of Deep Lakes or Oceans

, 2023
This paper describes a new underwater pumped storage hydropower concept (U.PSH) that can store electric energy by using the high water pressure on the seabed or in deep lakes to accomplish the energy transition from fossil to renewable sources ...
Michael Düren, Garg, Andreas, Frobeen, Heinz, Luther, Gerhard, Andreas Garg, Gerhard Luther, Düren, Michael, Heinz Frobeen, Schmidt-Böcking, Horst Werner, Bernhard Ernst, Ernst, Bernhard, Tom Bender, Matthias Puchta, Bender, Tom, Horst Werner Schmidt-Böcking, Puchta, Matthias   +15 more
core   +1 more source

Near‐Field Electrospinning Micro‐Printhead Achieves Precise Control of Nanofiber Deposition

Advanced Engineering Materials, EarlyView.
A micro‐printhead for near‐field electrospinning enables reproducible deposition of polymer nanofibers with diameters below 50 nm. Systematic parameter studies uncover the mechanisms linking operating conditions to fiber morphology, paving the way for precise and low‐cost nanoscale 3D manufacturing.As a high‐resolution, cost‐effective, and rapid ...
Han Xu, Dario Mager, Jan G. Korvink
wiley   +1 more source

Low head pumped hydro storage with contra-rotating pump-turbines [Elektronisk resurs]

, 2022
The increasing share of electrical energy production by intermittent sources pushes the demand for energy storage. Pumped hydro storage (PHS) has a long history of providing a cost-efficient energy storage solution. However, for PHS to be a viable option,
Fahlbeck, Jonathan,
core  

Air‐Pressure–Actuated Vibroacoustic Metamaterial With Tunable Bandgap: Design, Modeling, and Characterization

Advanced Engineering Materials, EarlyView.
This article presents the design, modeling, and characterization of air‐pressure–actuated programmable vibroacoustic metamaterials (PVAMM). The study focuses on leveraging air pressure to dynamically tune resonance frequencies for effective noise attenuation.
William Kaal, Michael M. Becker, Sarah C. L. Fischer   +2 more
wiley   +1 more source

Research on pressure fluctuation distribution law and rotor-stator interaction of pump-turbine in vaneless region of turbine mode

Frontiers in Energy Research
The vibration issue of pumped storage power station unit will directly affect the safe and stable operation of the unit, and the pressure pulsation in the vaneless region is an important index to evaluate the stability of the unit.
Chuanbao Yi, Chuanbao Yi, Zequan Zhang, Haiyang Dong, Yonggang Lu, Shuangquan Xu, Xiji Li, Chuanzhen Sun, Shuaishuai Zhang, Zhengwei Wang   +9 more
doaj   +1 more source

Productivity‐Driven Optimization of Laser Powder Bed Fusion Parameters for IN718 Superalloy: Process Control, Microstructure, and Mechanical Properties

Advanced Engineering Materials, EarlyView.
This study demonstrates how optimizing laser power, scanning speed, and hatching distance in laser powder bed fusion can boost the productivity of Inconel 718 manufacturing by up to 29% while maintaining mechanical integrity. The work delivers a validated process window and cost–time analysis, offering industry‐ready guidelines for efficient additive ...
Amir Behjat, Guido Barale, John Stavridis, Ehsan Norouzi, Jin‐Yoo Suh, Dong‐Ik Kim, Luca Iuliano, Abdollah Saboori   +7 more
wiley   +1 more source

Note on the pumped storage potential of the Onslow-Manorburn depression, New Zealand

, 2005
The Onslow-Manorburn depression in the South Island of New Zealand has possibility for development as the upper reservoir of the world's largest pumped storage scheme, as measured by an energy storage capacity of 10,200 GWh of realisable potential energy.
Bardsley, W. Earl
core