Results 111 to 120 of about 81,961 (270)
Nanohybrid of Silver‐MXene: A Promising Sorbent for Iodine Gas Capture from Nuclear Waste
Advanced Materials Interfaces, EarlyView.Silver‐MXene (Ag‐Ti3C2Tx) nanohybrids effectively captured iodine gas at 150 °C, with Ag nanoparticles loaded onto MXene via silver nitrate reduction. Upon exposure to iodine gas, silver iodide forms, confirming successful adsorption. Ag‐Ti3C2Tx shows superior iodine uptake (946 mg g−1) compared to conventional sorbents, demonstrating its potential as ...
Karamullah Eisawi +7 more
wiley +1 more source
The effect of catalyst on pyrolysis behavior of cotton and PEs for waste clothes reusing
Mechanical Engineering JournalIn recent years, the amount of waste clothes has been increasing. And the recycling of the waste clothes would be necessary for material cycles. A new method for separating blended fibers is required, because the separating of fibers is difficult to be ...
Akira SUAMI +3 more
doaj +1 more source
Co-pyrolysis of oil palm trunk and polypropylene: Pyrolysis oil composition and formation mechanism
South African Journal of Chemical Engineering, 2023 Pyrolysis oil can be used as a precursor to synthesize value-added biochemicals. Co-pyrolysis of two or more feedstocks generally improves the selectivity and yield of the target compounds.
Liza Melia Terry +7 more
doaj
Impact of growth conditions on the nature of magnetism and magnetotransport of $Sm_{0.55} Sr_{0.45} Mn O_3$ thin films [PDF]
arXiv, 2013 The impact of growth conditions on the magnetic and electrical transport properties of oriented polycrystalline Sm0.55Sr0.45MnO3 thin films prepared on nearly lattice matching LSAT(100) single crystal substrates by nebulized spray pyrolysis has been studied.
arxiv
Laser‐Induced Plasma Effects on Bond Breaking in High‐Density Polyethylene Pyrolysis
Advanced Materials Interfaces, EarlyView.This study introduces a novel application of Laser‐Induced Breakdown Spectroscopy (LIBS) for bond breaking in high‐density polyethylene (HDPE), an area previously unexplored in laser‐plastic interactions. For the first time, a numerical model has been developed to differentiate between photon‐induced and laser field‐induced plasma, demonstrating the ...
Rao Adeel Un Nabi +5 more
wiley +1 more source
Banana pseudo-stem biochar derived from slow and fast pyrolysis process
Heliyon, 2023 This study evaluated the properties of banana pseudo-stem (BPS) biochar derived from two different types of pyrolysis. The fast pyrolysis experiment was performed using a worktable-scale fluidized-bed reactor, while a bench-scale fixed-bed reactor was ...
Nurhayati Abdullah +4 more
doaj
A Three-Phase Analysis of Synergistic Effects During Co-pyrolysis of Algae and Wood for Biochar Yield Using Machine Learning [PDF]
arXivPyrolysis techniques have served to be a groundbreaking technique for effectively utilising natural and man-made biomass products like plastics, wood, crop residue, fruit peels etc. Recent advancements have shown a greater yield of essential products like biochar, bio-oil and other non-condensable gases by blending different biomasses in a certain ...
arxiv
Novel procedure to prepare cadmium stannate films using spray pyrolysis technique for solar cell applications [PDF]
arXiv, 2005 Thin films of cadmium stannate was prepared using low cost cadmium acetate and tin (II) chloride precursors by spray pyrolysis technique at three different substrate temperatures of 400, 450 and 5000 C. A novel procedure of simultaneously forming additional layer, introduced for the first time in this work, on the already coated cadmium stannate film ...
arxiv
Advanced Materials Interfaces, EarlyView.Nitrogen doping on Ru(0001) is investigated using ion implantation and annealing, tuning the distribution of graphitic (GN) and pyridinic (PN) nitrogen sites. STM, XPS, and DFT identified the structure and site distribution, and a thermodynamic phase diagram showed that GN is most stable at the Atop region, while PN preferred boundaries between FCC and
Buddhika S. A. Gedara +8 more
wiley +1 more source
Advanced Materials Interfaces, EarlyView.The present work is concerned with the fabrication of CO2 sensors based on MWCNTs/ZnO material, which is obtained by RF magnetron sputtering and electron‐beam deposition methods. The sensor exhibits highly sensitive and selective behavior, high repeatability, and temporal stability at low CO2 concentrations.
Mikayel Aleksanyan +6 more
wiley +1 more source