Results 1 to 10 of about 1,830,941 (244)

Shear Behaviour of RC Beams Strengthened by Various Ultrahigh Performance Fibre-Reinforced Concrete Systems

open access: yesAdvances in Civil Engineering, 2020
This study presents a numerical investigation on the shear behaviour of shear-strengthened reinforced concrete (RC) beams by using various ultrahigh performance fibre-reinforced concrete (UHPFRC) systems.
Walid Mansour, Bassam A. Tayeh
doaj   +2 more sources

Fatigue Damage Behaviors of TRC-Strengthened RC Beams. [PDF]

open access: yesMaterials (Basel), 2022
For the investigation of fatigue damage behavior of textile reinforced concrete (TRC)-strengthened RC beams, in this study, eight RC beams were fabricated, and five of them were strengthened with TRC and tested under fatigue loading until failure, using a four-point bending setup.
Sheng J, Yu Z, Dou G, Liu H.
europepmc   +3 more sources

Natural Frequency Response Evaluation for RC Beams Affected by Steel Corrosion Using Acceleration Sensors [PDF]

open access: yesSensors, 2020
This paper presented a laboratory investigation for analyzing the natural frequency response of reinforced concrete (RC) beams affected by steel corrosion.
Yuwei Zhang   +6 more
doaj   +2 more sources

Textile-reinforced mortar (TRM) versus fibre-reinforced polymers (FRP) in flexural strengthening of RC beams [PDF]

open access: yes, 2017
The aim of this paper is to compare the flexural performance of reinforced concrete (RC) beams strengthened with textile-reinforced mortar (TRM) and fibre-reinforced polymers (FRP).
ACI A. 440.3 R-04   +41 more
core   +3 more sources

Experimental Study of the Flexural Behaviour of RC Beams Made of Eco-friendly Sawdust Concrete and Strengthened by a Wooden Plate

open access: yesInternational Journal of Concrete Structures and Materials, 2023
In this paper, the effectiveness of the strengthening by a wooden plate for reinforced concrete (RC) beams that incorporate waste sawdust (SD) as a partial substitute for fine aggregate (sand) has been investigated.
A. Maglad   +5 more
semanticscholar   +1 more source

Effect of main and NSM reinforcing materials on the behavior of the shear strengthened RC beams with NSM reinforced HSC layers and bars

open access: yesCase Studies in Construction Materials, 2023
It became common practice to utilize near-surface mounted (NSM) bars to improve the shear capacity of steel-reinforced concrete (RC) beams. Consequently, carbon fiber-reinforced polymer (FRP) is usually used to improve RC beams' shear performance ...
Ayman Abdo   +3 more
doaj   +1 more source

Experimental Study on Bending Performance of High-Performance Fiber-Reinforced Cement Composite Prefabricated Monolithic Composite Beams

open access: yesBuildings, 2023
To enhance the mechanical properties and damage resistance of prefabricated monolithic composite beams, this study introduces HPFRCC precast mold shells as a replacement for ordinary concrete in the construction of prefabricated monolithic composite ...
Tingting Lu, Kai Guan, Haowei Jin
doaj   +1 more source

Flexural strengthening of RC beams using sisal fibre reinforced polymer (SFRP) composite with anchorage systems

open access: yesResults in Engineering, 2023
This research paper presents a study on the use of sisal fibre reinforced polymer (SFRP) composite as a sustainable alternative to artificial fibre reinforced polymers (FRPs) for strengthening reinforced concrete (RC) beams.
Arslan Qayyum Khan   +2 more
doaj   +1 more source

Flexural behavior of ultra-high performance geopolymer RC beams reinforced with GFRP bars

open access: yes, 2021
Geopolymer concrete (GPC) reinforced with glass fiber reinforced polymer (GFRP) bars can give a good structure system with high durability and strength.
Taha A. El-Sayed, Y. A. Algash
semanticscholar   +1 more source

Assessment of Glulam and Reinforced Concrete Beams in Multi-Storey Building

open access: yesCivil and Environmental Engineering, 2022
This study assesses glulam and reinforced concrete (RC) beams in a multi-storey building in Gävle in Sweden. StruSoft FEM-Design software is used to conduct the current study.
Bahrami Alireza, Azizian Dawod
doaj   +1 more source

Home - About - Disclaimer - Privacy