Results 21 to 30 of about 462 (171)
To study the protective performance of ceramic materials against the high‐speed penetration of projectiles, seven ceramic‐reactive powder concrete (C‐RPC) composite targets were designed. Using a 100/30 mm two‐stage light‐gas gun, penetration tests were performed at 1.4–2.0 km/s.
Xuezhi Wu +5 more
wiley +1 more source
A Review on the Application of Circulating Fluidized Bed Fly Ash in Building Materials
Circulating fluidized bed (CFB)‐based coal burning technology is a type of clean coal combustion technology. Owing to its characteristics of low temperature combustion and desulfurization in furnace, the CFB fly ash is quite different from ordinary fly ash. Based on the comprehensive understanding of physical and chemical characteristics of CFB fly ash,
Guanhua Jia +3 more
wiley +1 more source
Composite bridge decks consisting of steel plates and concrete are used to minimize fatigue cracking and damage of asphalt pavement of orthotropic steel bridge decks subjected to wheel loads. This paper presents a methodology to optimize the parameters and mechanical performance of a corrugated steel plate‐ultrahigh‐performance concrete (UHPC ...
Anhua Wang +4 more
wiley +1 more source
The present research work tries to assess the performance of a self‐compacting mortar containing zircon sand as a substitute for river aggregate in combination with nanoalumina and nanosilica as cement replacements. The fresh state results, as observed through the mini slump cone and mini V funnel, showed positive effects of zircon sand on workability ...
Sahaya Ruben +4 more
wiley +1 more source
Agro Waste Sugarcane Bagasse as a Cementitious Material for Reactive Powder Concrete
In the field of advanced concrete science, the construction industry has risen to great heights. Due to its own characterisation, the manufacturing cost of reactive powder concrete (RPC) is very high.
Selvadurai Sebastin +4 more
doaj +1 more source
Flexural Reinforcement of Over‐Reinforced Beam by Ultrahigh Performance Concrete Layer
In order to improve the failure state of over‐reinforced beams and enhance their ductility, an innovative reinforcement method was proposed by adding an ultrahigh performance concrete (UHPC) layer on the top surface of the over‐reinforced beam to take advantage of the high compressive strength of UHPC.
Yang Song +3 more
wiley +1 more source
Mechanical properties of reactive powder concrete: a comparison study
Reactive Powder Concrete (RPC) is one of the new and most important concrete manufacturing advancements. A significant number of researchers have studied the mechanical properties of such type of concrete and the effect of different parameters on it ...
Zahraa Hadi Marzoq +1 more
doaj +1 more source
Experimental Investigation of Compressive and Tensile Strength of Steel Fiber Reactive Powder Concrete [PDF]
Reactive powder concrete (RPC) is one of the ultra high performance concrete ( UHPC ) with superior physical and mechanical properties . Reactive powder concrete is produced using cement and very fine powdered materials including crushed quartz , silica ...
Mohammad Ali Dashti Ramatabadi +2 more
doaj +1 more source
Mechanical Behavior of Reactive Powder Concrete Subjected to Biaxial Loading
To investigate the biaxial mechanical characteristics of reactive powder concrete (RPC), RPC plate specimens and bone‐shaped specimens were tested under compression‐compression and compression‐tension loadings, respectively. The strengths and strains of the specimens were recorded, and the crack patterns and failure modes in various stress states were ...
Ziruo Yu +4 more
wiley +1 more source
Prediction of the Nominal Bending Moment Capacity for Plain and Singly Reinforced Rectangular RPC Beam Sections [PDF]
A new generation of Ultra High Performance Concrete (UHPC) named Reactive Powder Concrete (RPC) was developed in the last decades, which offers, superior strength, durability and ductility.
Hisham M. Al-Hassani +2 more
doaj +1 more source

