Results 41 to 50 of about 308 (200)
Reductive conversion of CO2 to formic acid with waste silicon reducing agent catalyzed by in situ generation of active fluoride species from a tertiary amine, protonic acid, and simple inorganic fluoride salt, such as KF and NaF. ABSTRACT The activation and catalytic reduction of carbon dioxide (CO2) using silicon‐based reducing agents is an important ...
S. M. A. Hakim Siddiki +6 more
wiley +1 more source
Neutron irradiation-induced embrittlement of the reactor pressure vessel (RPV) leads to an increase in the reference temperature (T0) of the RPV steel and reduces the operating lifetime of nuclear reactors. Fracture mechanics testing of RPV steels before
A. Das +4 more
doaj +1 more source
First Operation Results of a Methanol Demonstration Plant With Real Steel Mill Gases
A demonstration plant with industrial setup regarding length, diameter, boiling water cooling system and gas recycle was initially operated with cleaned blast furnace gas and compared with earlier experiments with bottle gases. Dynamic disturbances from the steel mill and gas cleaning unit were noticed and could be compensated by the control system ...
Johannes Michael Voß, Tim Schulzke
wiley +1 more source
This study evaluates how small water impurities—typical in ammonia cracking feedstock—affect catalyst performance at elevated pressures and temperatures. By decoupling permanent degradation from reversible inhibition, the findings highlight trace water as a significant factor for reliable catalyst screening and industrial ammonia cracking scale‐up ...
Bruno V. P. Lago +6 more
wiley +1 more source
Abstract Acid catalyzed conversion of durene by isomerization, disproportionation, and transalkylation is of interest to the development of a methanol‐to‐jet process to reduce the amount of durene in the kerosene. It was of interest to determine whether durene conversion could be performed at a temperature lower than 350°C.
Aida G. Velasco Ortiz +2 more
wiley +1 more source
The activated corrosion product assessments of fusion structural materials are essential to designing components and evaluating workers’ radiation exposure.
Motoki Nakajima, Takashi Nozawa
doaj +1 more source
Monitoring gas–liquid dynamics using Electrical resistance tomography for process intensification in stirred tanks Abstract Electrical resistance tomography (ERT) is a non‐invasive technique widely applied to the study of multiphase flows, where phases exhibit different electrical properties.
Federico Alberini +2 more
wiley +1 more source
On the transition of short cracks into long fatigue cracks in reactor pressure vessel steels
Short fatigue cracks, having dimension less than 1 mm, propagate at much faster rates (da/dN) even at lower stress intensity factor range (da/dN) as compared to the threshold stress intensity factor range obtained from long fatigue crack growth studies ...
Singh Rajwinder +4 more
doaj +1 more source
Experimental methods in chemical engineering: Magnetometry
Abstract Magnetometry is a non‐invasive technique to characterize the behaviour of magnetic materials of which the most common contain Fe, Co, and Ni. Vibrating sample magnetometers (VSMs) vibrate samples at a fixed frequency in a static, homogeneous magnetic field to induce a voltage in pick up coils according to Faraday's law of induction.
Michael Claeys +3 more
wiley +1 more source
The magnetic hysteresis loops and Barkhausen noise of a single α-iron with nonmagnetic particles are simulated to investigate into the magnetic hardening due to Cu-rich precipitates in irradiated reactor pressure vessel (RPV) steels.
Yi Li +5 more
doaj +1 more source

