Results 41 to 50 of about 45,005 (267)
Application of Beam Functions for Static Calculation of Bending Rods and Rectangular Plates
In this paper, the deflections of a rod and a rectangular plate with any types of boundary conditions are proposed to be represented as a series and a double series of eigenfunctions of the differential equation of bending vibrations of a beam or plate ...
S. V. Bosakov
doaj +1 more source
Hydrogen‐Assisted Fracture of Iron‐Based Fe–Ni–Al Alloys
Principal relations and fracture mechanisms of single‐phase and precipitate‐strengthened Fe–Ni–Al alloys subjected to prior electrochemical hydrogen charging are identified. The mechanisms of hydrogen effect on strength and microhardness are discussed, including hydrogen‐induced increase in microhardness and the role of hydrogen in fracture behavior ...
Nataliya Yadzhak +3 more
wiley +1 more source
Numerical analysis of propeller-excited plate vibrations
Intense vibrations excited by a propeller worsen the structural reliability of a ship. In this study, a ship hull is modeled as a simple rectangular plate to study propeller excitation vibrations. The interaction between a rectangular plate and propeller
Weipeng Zhang +5 more
doaj +1 more source
Creep Properties and Deformation Mechanism of Additively Manufactured NiAl‐CrMo Composites
Additively manufactured NiAl‐CrMo composites contain numerous interfaces and cell boundaries that control their creep response. At 700°C under high applied stress, creep is dominated by dislocation‐controlled power‐law mechanisms. At 800°C–900°C and lower stresses, creep is primarily diffusion‐controlled along cell boundaries.
Jan Vollhüter +9 more
wiley +1 more source
Investigating Flat Plate Drag Reduction Using Taguchi Robust Design
Research has shown when a rectangular cylinder is located near a flat plate, the flat plate skin friction coefficient changes as a function of the rectangular aspect ratio, gap height between the rectangular and flat plate, distance of rectangular from ...
Ghodrat Ghassabi, Mohsen Kahrom
doaj
Analysis on free vibration and critical buckling load of a FGM porous rectangular plate
The properties of functionally gradient materials (FGM) are closely related to porosity, which has effect on FGM's elastic modulus, Poisson's ratio, density, etc. Based on the classical theory of thin plates and Hamilton principle, the mathematical model
doaj +1 more source
Scandium (Sc)‐doped AlCoCrFeMo HEA coatings are fabricated via flame spraying with 0.1, 0.3, and 0.5 wt% Sc additions. Among these, the HEA‐Sc0.3 coating exhibits the highest corrosion resistance, indicated by a more positive corrosion potential and lower current density.
Pankaj Kumar +7 more
wiley +1 more source
Deep‐UV (258 nm) femtosecond pulses enable uniform amorphous silicon writing on Si(100)/(111) with a six‐fold larger fluence amorphization window than NIR methods. Optimized fluence and overlap yield 20–45 nm uniform and continuous amorphous layers. Microscopy shows sharp interfaces, and real‐time reflectivity reveals nanosecond melt–resolidification ...
Wissal Benali +5 more
wiley +1 more source
Free Vibration Analysis of a Rectangular Plate with Kelvin Type Boundary Conditions
The transverse vibrations of a rectangular plate with the Kelvin type boundary conditions at four corners are investigated. The plate is modeled as being attached to four lumped spring-damper systems at the corners.
R. Kırışık, Ş. Yüksel
doaj +1 more source
Finite element analysis of a solar collector plate using two plate geometries
The thermal behavior of an absorber plate in a solar collector is investigated using finite element analysis. The thermal behavior and efficiency of two absorber plate geometries are studied, using a typical solar collector with a rectangular profile as ...
Diego Manuel Medina Carril +3 more
doaj +1 more source

