Results 21 to 30 of about 17,656 (308)
Effective all-fiber pump recycler for kilowatt fiber lasers
Applied Optics, 2022 We report an effective pump recycler for industrial kilowatt fiber lasers. The pump recycler is a ( 6 + 1 ) × 1 tapered fiber bundle, with signal ports of Ge-doped fiber (GDF) with core/cladding diameters of 20/400 µm and pump fiber ports (PFPs) with core/cladding diameters of 135/155 µm.
Lin, Weixuan +5 more
openaire +3 more sources
Garment Waste Recycled Cotton/Polyester Thermal and Acoustic Properties of Air-Laid Nonwovens
Advances in Materials Science and Engineering, 2020 This research paper reports a study on thermal and sound insulation samples developed from garment waste recycled cotton/polyester fiber (recycled cotton/PET) for construction industry applications.
S. Sakthivel +5 more
doaj +1 more source
Fracture and Structural Integrity, 2022 In order to promote the application of steel fiber recycled concrete in road and bridge construction, 25 groups of steel fiber recycled concrete with different mix proportions were designed, taking the replacement rate of recycled aggregates and the ...
Xia Zhengbing, Duan Xiaofang
doaj +1 more source
Review of Mechanical and Temperature Properties of Fiber Reinforced Recycled Aggregate Concrete
Buildings, 2022 Recycled aggregate concrete has received increasing attention owing to its broad development prospects in recent years. This study discusses the enhancement mechanism of various fibers on the mechanical properties, high-temperature resistance, and freeze–
Xinglong Yao +6 more
doaj +1 more source
Recycled Tire Fibers as Reinforcement for Recycled Polyethylene
, 2023 Recycled tire fibers (RTF) are currently one of the most abundant waste not being recovered due to several processing hurdles and the presence of high amounts of residual ground rubber particles (GR). Therefore, this study proposes a simple approach to separate most of rubber particles from fibers and to determine their rubber content using ...
Hossein Kazemi +3 more
openaire +1 more source
Recycled Fibers for Sustainable Hybrid Fiber Cement Based Material: A Review
, 2021 Reinforcing fibers have been widely used to improve physical and mechanical properties of cement-based materials. Most fiber reinforced composites (FRC) involve the use of a single type of fiber to improve cement properties, such as strength or ductility.
Balea Martín, Ana +4 more
core +2 more sources
Fiber association and network formation in PLA/lignocellulosic fiber composites. [PDF]
, 2013 PLA composites were prepared in an internal mixer with a lignocellulosic fiber having relatively large aspect ratio. Fiber content changed between 0 and 60 vol% and the homogenized material was compression molded to 1 mm thick plates.
Renner, Károly +4 more
core +1 more source
Experimental and multi-scale investigation of the mechanical behavior of mechanically recycled glass fiber reinforced thermoplastic composites [PDF]
, 2023 Fiber reinforced thermoplastic polymer composites have gained a lot of attention over the past two decades, due to their excellent mechanical performance and their lightweight resulting in lower CO 2 emissions for airplanes and vehicles.
PELTIER, Laurent +9 more
core +1 more source
Recycling of Reinforced Glass Fibers Waste: Current Status [PDF]
Materials, 2022 In this paper, a review of the current status and future perspectives for reinforced glass fiber waste is undertaken, as well as an evaluation of the management hierarchy for these end-of-life materials. Waste levels are expected to increase in the coming years, but an improvement of collection routes is still necessary.
R. M. Gonçalves +2 more
openaire +3 more sources
Study on Pavement Performance of Cement Stabilized Recycled Brick Aggregate Base with Basalt Fiber
Advances in Materials Science and Engineering, 2022 The solution to environmental problems caused by the generation of construction brick waste is its use as a substitute for natural gravel aggregate in highway base material.
Zhenxia Li +9 more
doaj +1 more source