Results 221 to 230 of about 22,159 (314)
Large‐scale tests of 50‐year‐old prestressed concrete bridge girders
Structural Concrete, EarlyView.Abstract An experimental investigation has been carried out as part of the BRIDGE|50 research project, focusing on large‐scale loading tests performed on five 50‐year‐old prestressed concrete (PC) girders. The study aimed at evaluating the structural response of five girders retrieved from a viaduct in the urban area of Turin, Italy, subjected to 4 ...
Francesco Tondolo +7 more
wiley +1 more source
Structural Concrete, EarlyView.Abstract With the market introduction of new reinforcing materials, such as corrosion‐resistant steel, the effect of their stress–strain relationship on the ductility of reinforced concrete structures needs to be evaluated. Their moment‐curvature behavior significantly influences bending moment redistributions, rotation capacity, and deformation at ...
Nathalie Reckinger +2 more
wiley +1 more source
Structural Concrete, EarlyView.Abstract In practice, reinforced concrete (RC) wall‐like columns often have openings to facilitate building services, which creates stress concentrations around the opening, resulting in the weakening of their load‐carrying capacity. This study proposes innovative strengthening methods using near‐surface mounted (NSM) incorporating steel materials to ...
Ahmed Hamoda +4 more
wiley +1 more source
Flexural performance of concrete‐filled steel tubular beams with wood chip aggregate
Structural Concrete, EarlyView.Abstract This study investigates the flexural performance of concrete‐filled steel tubular (CFST) beams with partial replacement of aggregates by wood chips (0%–25%) through experimental and numerical analysis. This study is novel in that it experimentally and numerically investigates the flexural behavior of CFST beams with partial replacement of ...
Mizan Ahmed +6 more
wiley +1 more source
Structural Concrete, EarlyView.Abstract Compression field approaches such as the Cracked Membrane Model with fixed, interlocked cracks (CMM‐F) are efficient tools for the mechanical modeling of reinforced concrete elements, providing the mechanical model σ=fε$$ \boldsymbol{\upsigma} =f\left(\boldsymbol{\upvarepsilon} \right) $$ required for finite element analyses.
Andreas Näsbom +2 more
wiley +1 more source
Pre‐failure behavior of continuous post‐tensioned and post‐grouted beam in case of tendon failure
Structural Concrete, EarlyView.Abstract Grouted tendons are a common solution for long‐span bridge structures. The grout provides bond and corrosion protection for prestressing steel. However, if the grouting is defective, corrosion of the prestressing steel may initiate and eventually lead to tendon failure.
Olli Asp +2 more
wiley +1 more source
Structural Concrete, EarlyView.Abstract Steam curing is commonly used to manufacture precast culverts to accelerate early strength development. This study investigates the effect of supplementary cementitious materials (SCMs) on the permeability properties of steam‐cured precast concrete culverts.
Saugat Humagain +3 more
wiley +1 more source
Structural Concrete, EarlyView.Abstract The use of fiber reinforced concrete (FRC) in precast tunnel segments is among the most established and representative applications of this material. Over the past two decades, numerous tunnel linings were constructed with partial or total substitution of conventional steel reinforcement by fibers, this yielding to quantifiable benefits in ...
Vladimir Rusanov +4 more
wiley +1 more source
Structural Concrete, EarlyView.Abstract Globally, there is a growing trend toward taller, larger, and more structurally diverse buildings that require expansive interior spaces. Rapid technological advancements have surged the demand for data centers, while the expansion of e‐commerce has increased logistics volumes, driving the need for large‐scale warehouses.
Han Yong Lee +2 more
wiley +1 more source