Results 11 to 20 of about 7,982,343 (363)

Nanoplastics adsorption and removal efficiency by granular activated carbon used in drinking water treatment process.

open access: yesScience of the Total Environment, 2021
In this study Granular Activated Carbon (GAC) used in drinking water treatment processes is evaluated for its capacity to adsorb and remove polystyrene (PS) nanoplastics.
Lina Ramirez Arenas   +3 more
semanticscholar   +1 more source

High SO2 Removal Efficiency Testing [PDF]

open access: yes, 1997
On the base program, testing was completed at the Tampa Electric Company`s (TECo`s) Big Bend Station in November 1992. The upgrade option tested was DBA additive. Additional testing was conducted at this site during the previous quarter (April through June 1997). Results from that testing were presented in the Technical Progress Report dated July 1997.
Blythe, Gary M., Phillips, James L.
openaire   +10 more sources

Simultaneous removal efficiency of H2S and CO2 by high-gravity rotating packed bed: Experiments and simulation

open access: yesOpen Chemistry, 2021
This study explores the possibility of applying high-gravity rotating packed bed (HGRPB) in removing H2S and CO2 from biogas. Ca(OH)2 aqueous solution was used as the absorbent in this study.
Tran Lien Thi   +7 more
doaj   +1 more source

Synthesis, characterization and heavy metal removal efficiency of nickel ferrite nanoparticles (NFN’s)

open access: yesScientific Reports, 2021
The heavy metals, such as Cr(VI), Pb(II) and Cd(II), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings.
Waheed Ali Khoso   +3 more
semanticscholar   +1 more source

Removal of Typical PPCPs by Reverse Osmosis Membranes: Optimization of Treatment Process by Factorial Design

open access: yesMembranes, 2023
In this paper, the removal effect of reverse osmosis (RO) on three common pharmaceuticals and personal care products (PPCPs), including ibuprofen (IBU), carbamazepine (CBZ), and triclosan (TCS), were compared under different process conditions, and the ...
Jianing Liu   +4 more
doaj   +1 more source

Efficient removal of black henna tattoos [PDF]

open access: yesPediatric Dermatology, 2020
AbstractBackground/ObjectivesPara‐phenylenediamine, a dye frequently added to henna tattoos to create the black color, is a potent contact allergen. Severe contact dermatitis may arise within days even after the first application. Our objective was to develop a method for rapid and complete removal of para‐phenylenediamine‐containing black henna ...
David M. Ferrari   +3 more
openaire   +3 more sources

Antibiotics in Wastewater: Baseline of the Influent and Effluent Streams in Kuwait

open access: yesToxics, 2022
This study provides baseline information on the concentrations of antibiotics in influent and effluent from two wastewater treatment plants in regular operation in the State of Kuwait.
Bondi Gevao   +4 more
doaj   +1 more source

EFFECT OF ADSORPTION CONDITIONS ON THE REMOVAL OF LEAD (II) USING SEWAGE SLUDGE AS ADSORBENT MATERIAL

open access: yesJournal of Engineering and Sustainable Development, 2022
The introduction of more stringent legislation limiting the disposal and use of sewage sludge, combined with an increase in its production and the loss of previously recognized disposal routes, has sparked a search for alternate applications for sewage ...
Ahmed M. Fat’hi, Ahmed H. Ali
doaj   +1 more source

Assessing Hydrocarbon Removal from Petroleum Hydrocarbon-containing Effluent using UV/O3 Advanced Oxidation [PDF]

open access: yesمحیط زیست و مهندسی آب, 2018
The purpose of this study was to experimentally investigate the treatment of petroleum hydrocarbons-contaminated wastewater using UV/O3 method. To predict the degree of pollutant destruction, the initial concentrations of O3 and pollutant, pH, solution ...
Maral Rashidi Fard, Majid Amiri
doaj   +1 more source

Removing metallic impurities from ferrosilicon alloy by Ar-O2 gas blowing

open access: yesCailiao gongcheng, 2021
Ferrosilicon alloy is widely used as alloying agent and deoxidizer in the steelmaking process, which containing the metallic impurities of Al, Ca, and Ti would directly affect the cleanliness of the molten steel.
ZHANG Yan-hui   +3 more
doaj   +1 more source

Home - About - Disclaimer - Privacy