Results 31 to 40 of about 145,637 (315)

Evaluation of Groundwater in the Coastal Portion of Guasave, Sinaloa for White Shrimp Farming (Penaeus vannamei) through VES, Chemical Composition, and Survival Tests

open access: yesJournal of Marine Science and Engineering, 2021
We studied the potential of white shrimp farming with groundwater from the coastal aquifer of Guasave, Sinaloa. The use of water from the aquifer in aquaculture represents challenges due to variability in the quality of groundwater.
Mauro Espinoza Ortiz   +6 more
doaj   +1 more source

High Temperature Oxidized SnO2 Films Prepared by Reactive Sputtering

open access: yesActive and Passive Electronic Components, 1987
Undoped and Sb-doped tin oxide films were prepared by d.c. reactive ion sputtering in an argon atmosphere with oxygen partial pressures ranging from 0 to 50%. The films were anneled in oxygen in the temperature range 360 - 893℃.
G. Beensh-Marchwicka   +2 more
doaj   +1 more source

Dependence of Electrical and Optical Properties of Sol-gel-derived SnO2 Thin Films on Sb-substitution

open access: yesMedžiagotyra, 2019
In the present work, Sb-doped SnO2 (ATO) thin films were deposited on Si substrates by spin-coating method and the influence of Sb-doping on surface roughness, structural, optical and electrical properties has been investigated.
Elisée MUHIRE   +3 more
doaj   +1 more source

Anisotropy of the In-Plane and Out-of-Plane Resistivity and the Hall Effect in the Normal State of Vicinal-Grown YBa2Cu3O7−δ Thin Films

open access: yesNanomaterials, 2021
The resistivity and the Hall effect in the copper-oxide high-temperature superconductor YBa2Cu3O7-δ (YBCO) are remarkably anisotropic. Using a thin film of YBCO grown on an off-axis cut SrTiO3 substrate allows one to investigate these anisotropic ...
Gernot Heine   +3 more
doaj   +1 more source

Area Selective Deposition of Metals from the Electrical Resistivity of the Substrate

open access: yes, 2021
Area selective deposition (ASD) of films only on desired areas of the substrate opens for less complex fabrication of nanoscaled electronics. We show that a newly developed CVD method, where plasma electrons are used as the reducing agent in deposition ...
Robert, Boyd   +4 more
core   +1 more source

Testing of resistivity of dense ash slurry and return water from 'Kostolac A' thermal power plant under laboratory conditions [PDF]

open access: yesZbornik Radova: Elektrotehnički Institut "Nikola Tesla", 2015
The paper presents the measured results of the resistivity values of dense ash slurry and return water mixture originating from the 'Kostolac A' thermal power plant.
Kostić Vojin   +4 more
doaj   +1 more source

Study on the Effect of Cold Deformation and Heat Treatment on the Properties of Cu-Ag Alloy Wire

open access: yesMicromachines, 2023
The effects of various drawing parameters and annealing processes on the structure and properties of Cu-Ag wires, containing 1 wt% silver, were investigated using specialized equipment including fine wire-drawing machines, very fine wire-drawing machines,
Xuefeng Wu   +4 more
doaj   +1 more source

Electrical Resistivity Characteristics and Mechanism of Solidified Loess Mixed with Calcium Oxide-modified Red Mud

open access: yesTaiyuan Ligong Daxue xuebao
Purposes This study focues on the resistivity characteristics and mechanism of solidified loess mixed with CaO-modified red mud. Methods The resistivity of the samples with different CaO and red mud contents and curing ages was tested.
Zhiwei SONG   +4 more
doaj   +1 more source

Analysis of the Effect of Capillary Water Absorption on the Resistivity of Cementitious Materials

open access: yesApplied Sciences, 2023
In a humid environment, the stray current generated by subway operation will corrode the underground pipe network and the internal steel structure of the track plate, which will seriously affect the service life of the subway track plate and increase the
Xiangyu He   +3 more
doaj   +1 more source

Temperature dependence of the electrical resistivity and the anisotropic magnetoresistance (AMR) of electrodeposited Ni-Co alloys

open access: yes, 2010
The electrical resistivity and the anisotropic magnetoresistance (AMR) was investigated for Ni Co alloys at and below room temperature. The Ni Co alloy layers having a thickness of about 2 micron were prepared by electrodeposition on Si wafers with ...
Pádár, József   +9 more
core   +1 more source

Home - About - Disclaimer - Privacy