Results 1 to 10 of about 7,024 (160)
Impact of Temperature and Relative Humidity on Reverberation Time in a Reverberation Room
Changes in acoustic parameters measured in a room may depend on the location and orientation of the sound source and microphones or on the reverberation conditions of the room.
Artur Nowoświat
doaj +4 more sources
Children’s recall of words spoken in their first and second language:Effects of signal-to-noise ratio and reverberation time [PDF]
Speech perception runs smoothly and automatically when there is silence in the background, but when the speech signal is degraded by background noise or by reverberation, effortful cognitive processing is needed to compensate for the signal distortion ...
Anders eHurtig +8 more
doaj +2 more sources
Determination of the Reverberation Time Using the Measurement of Sound Decay Curves
In the measurements of reverberation time, measurement methods of different accuracy are used depending on the room. For ordinary rooms, the measurements are made using the interrupted noise method, which consists of determining the decay curve after ...
Artur Nowoświat
doaj +3 more sources
BIM-based reverberation time analysis [PDF]
Building Information Modeling (BIM) can store information of building elements and provide a computational platform for physical analyses for building systems. BIM can resolve several problems throughout various phases of design (as well as construction and operation).
Mazdak Nik-Bakht
exaly +3 more sources
Experimental Validation of the Model of Reverberation Time Prediction in a Room
It is well known that the uncertainty of input data has a great influence on the accuracy of room acoustics simulations. The aforementioned accuracy is significantly influenced by the selection of the acoustic properties of room-delimiting materials ...
Artur Nowoświat, Marcelina Olechowska
doaj +3 more sources
Reverberation time measurements in non-diffuse acoustic field by the modal reverberation time
Abstract The increasing presence of low frequency sources and the lack of acoustic standard measurement procedures make the extension of reverberation time measurements to frequencies below 100 Hz necessary. In typical ordinary rooms with volumes between 30 m 3 and 200 m 3 the sound field is non-diffuse at such low frequencies, entailing ...
Federico Casassa +2 more
exaly +5 more sources
Reverberation lags viewed in hard X-rays from an accreting stellar-mass black hole [PDF]
The X-ray-emitting corona near a black hole (BH) is too small to be directly imaged, but the rapid variability is used to infer the geometry by measuring time lags caused by coronal X-rays reflecting off the disk, known as reverberation lags.
Bei You +7 more
doaj +2 more sources
The Republic of Korea is currently an aging society, and it will enter an ultra-aging society in 2025. This study aimed to investigate the undesignated appropriate reverberation time of learning spaces for elderly people in Korea.
Seung-Min Lee +2 more
doaj +1 more source
Reverberation is the primary background interference of active sonar systems in shallow water environments, affecting target position detection accuracy.
Zhen Wang +6 more
doaj +1 more source
A Space-Time Adaptive Processing Method Based on Sparse Reconstruction of Reverberation Interference
Aiming at the problem of how to obtain reverberation samples and estimate their covariance matrix in the space-time adaptive processing(STAP) of sonar system, a new space-time adaptive processing method is proposed based on sparse reconstruction of ...
doaj +1 more source

