Interparticle Forces Behind Plasticity of Ceramic Pastes: A Literature Review
International Journal of Ceramic Engineering &Science, Volume 8, Issue 1, January 2026.During the plastic forming process, ceramic pastes are deformed into the desired shapes in response to applied external forces. It has been claimed that ceramic pastes' plasticity can be achieved by controlling the interparticle interaction that is attractive at long‐range and repulsive at short‐range.
Kimiyasu Sato +4 more
wiley +1 more source
Three-Dimensional Printing of Si₃N₄ Bioceramics by Robocasting
, 2018 Silicon nitride (Si3N4) implants have been used in spinal fusion surgery since 2008. The ability to fabricate Si3N4 implants with anatomically relevant shapes and controllable architecture can be particularly beneficial in patient-specific applications ...
Wei Xiao +3 more
core +1 more source
Environmentally friendly water-based robocasting of complex barium titanate structures
Open CeramicsIn this work, barium titanate structures (e.g., cellular and monolithic) were fabricated by robocasting, which is an extrusion-based additive manufacturing process in which shear-thinning pastes are deposited.
Larissa Wahl +4 more
doaj +1 more source
Open CeramicsRobocasting stands as a pertinent additive manufacturing technique for producing intricate ceramic parts. Amidst stricter environmental regulations, the adoption of natural additives becomes imperative.
Delphine Gourdonnaud +9 more
doaj +1 more source
Estabelecimento dos parâmetros reológicos mais adequados para a fabricação aditiva por robocasting de pastas plásticas argilosas [PDF]
No presente trabalho propôs-se desenvolver e produzir pastas cerâmicas de faiança, grés e porcelana, assim como métodos de caracterização reológica, para fabrico de peças através da técnica de manufatura aditiva de robocasting ou direct ink writing.
Medeiros, Raúl Jorge da Costa
core
Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering
Three dimensional scaffolds with controlled pore architecture were prepared from 45S5 Bioglass (R) powders by robocasting (direct-writing) using carboxymethyl cellulose (CMC) as the single processing additive.
Lemos, Alexandra +5 more
core +1 more source
Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration
Acta Biomaterialia, 2010 The effect of polymer infiltration on the compressive strength of β-tricalcium phosphate (TCP) scaffolds fabricated by robocasting (direct write assembly) is analyzed in this work. Porous structures consisting of a tetragonal three-dimensional mesh of interpenetrating rods were fabricated from concentrated TCP inks with suitable viscoelastic properties.
Martínez-Vázquez, Francisco J. +4 more
openaire +4 more sources
Benefits of Re-sintering on the Properties of Al2O3-based Ceramics Obtained by Extrusion 3D Printing [PDF]
Materials ResearchIn this study, Al2O3-based ceramics were obtained by 3D extrusion printing using an ink containing carboxymethylcellulose (CMC) and polyethyleneimine (PEI) as additives.
Bruno M. Silva +5 more
doaj +1 more source
Beta tricalcium phosphate doping and macroporous shaping by robocasting
, 2021 Ce travail de thèse porte sur l’élaboration de phosphate β-tricalcique (β-TCP, β-Ca3(PO4)2) dopé à l’aide de quatre cations (Mg2+, Sr2+, Ag+ et Cu2+) par la méthode de co-précipitation et la fabrication de macroporeux par robocasting.
Somers, Nicolas
core
Optimization of clay-based ceramic mixtures with sugarcane bagasse fiber for 3D printing
Case Studies in Construction MaterialsRobocasting is an additive manufacturing technique that utilizes a numerically controlled extruder to 3D print objects layer by layer by continuously extruding a paste-like material through a nozzle onto a build surface.
Guilherme Pante Leme de Campos +4 more
doaj +1 more source