Results 211 to 220 of about 141,433 (299)
Our study reveals that caving‐enhanced geothermal systems (C‐EGS) with adequately fractured reservoirs achieve optimal heat extraction by minimizing preferential flow paths, while conventional fracturing (F‐EGS) and pipe‐based (P‐EGS) systems suffer accelerated thermal drawdown.
Fangchao Kang +4 more
wiley +1 more source
Enhancing Permeability and Gas Extraction in Low-Permeability Coal Seams: A Study on Gas-Liquid Two-Phase Jet Technology. [PDF]
Li Y.
europepmc +1 more source
An experimental device for physical simulation of hydraulic fracturing, comprising: a load‐bearing mechanism with multiple interconnected plates that collectively form an sample chamber; a load‐generating mechanisms, with multiple load‐generating mechanisms arranged within the experimental chamber.
Delei Shang +5 more
wiley +1 more source
Surface hydration‐induced damage in tight oil‐bearing sandy conglomerate reservoirs
A series of techniques such as X‐ray diffraction, scanning electron microscopy, energy‐dispersive spectroscopy, conductivity tests, and infrared thermal imaging were used. The key findings are the identification of a two‐stage surface hydration process and the elucidation of the effects of various minerals and elements on the hydration process ...
Anbang Zhao +5 more
wiley +1 more source
The impact of forced closure on proppant distribution of hydraulic fracturing in shale formations
Research findings demonstrate that implementing forced closure within shale formations can remarkably mitigate proppant settlement, concurrently increasing the effective propped surface area from 29.74% to 38.68%. Abstract Forced closure is widely used in conventional oil and gas reservoirs to promote uniform proppant placement.
Tongxuan Gu +3 more
wiley +1 more source
Study on crude oil displacement efficiency by fracturing fluid in tight sandstone reservoir. [PDF]
Li J +6 more
europepmc +1 more source
B1 is bord width 1, B2 is bord width 2, L is the pillar length, W is the pillar width, red color and letter A represent the pillars, and white color and number 1 represent excavated areas. Pstress is the average pillar stress; σv is the vertical component of the virgin stress, MPa; and e is the areal extraction ratio. e = B o B o + B P ${\rm{e}}=\frac{{
Tawanda Zvarivadza +4 more
wiley +1 more source
Application of CO₂ fracturing blasting in mountain tunnel construction adjacent to existing structures. [PDF]
Li Z +6 more
europepmc +1 more source
Effect of antenna size on rock mass breaking efficiency under open-ended microwave treatment
Shou-Ning Xue +4 more
openalex +2 more sources

