Results 71 to 80 of about 447,918 (297)
Simple Method for the Preparation of Composites Based on PA6 and Partially Exfoliated Graphite [PDF]
, 2012 In the present work, the preparation of composite systems based on polyamide 6 (PA6) and exfoliated graphite was attempted by applying a simple procedure, which consists of a preliminary dispersion/exfoliation of graphite in the monomer, namely, ε ...
Bocchini, Sergio +5 more
core +3 more sources
Advanced Engineering Materials, EarlyView.Stabilization of L‐PBF Ni50.7Ti49.3 under low‐cycle loading was investigated. Recoverable strain after cycling was dependent on the amount of applied load. Recovery ratio was 53.4% and 35.1% at intermediate and high load, respectively. The maximum total strain reached 10.3% at a high load of 1200 MPa.
Ondřej Červinek +5 more
wiley +1 more source
Noise2Void for denoising atomic resolution scanning transmission electron microscopy images
npj Computational MaterialsThe Noise2Void technique is demonstrated for successful denoising of atomic resolution scanning transmission electron microscopy (STEM) images. The technique is applied to denoising atomic resolution images and videos of gold adatoms on a graphene ...
William Thornley +5 more
doaj +1 more source
Journal of Materials Research and TechnologyNi–Cr–Al coarse-grained (CG) or nanograined (NC) alloys with 5 wt% Al but various Cr concentrations (10 wt% and 30 wt%) were prepared via casting and magnetron sputtering, respectively.
Xia Zhang +6 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.Creep experiments at 900°C on coarse‐grained steel‐ceramic composites containing recycled magnesia reveal that higher ceramic volume fractions significantly enhance the creep resistance. Detailed EBSD investigations identify subgrain formation in the steel matrix as the dominant deformation mechanism.
Moritz Müller +6 more
wiley +1 more source
Post-acquisition image based compensation for thickness variation in microscopy section series
, 2015 Serial section Microscopy is an established method for volumetric anatomy reconstruction. Section series imaged with Electron Microscopy are currently vital for the reconstruction of the synaptic connectivity of entire animal brains such as that of ...
Bogovic, John A. +2 more
core +1 more source
EBIC/TEM investigations of process-induced defects in EFG silicon ribbon [PDF]
, 1981 Electron bombardment induced conductivity and scanning transmission electron microscopy observations on unprocessed and processed edge-defined film-fed growth ribbon show that the phosphorus diffused junction depth is not uniform, and that a variety of ...
Ast, D. G., Cunningham, B.
core +2 more sources
Advanced Engineering Materials, EarlyView.Thermomechanical fatigue tests of laser beam powder bed fusion (PBF‐LB) Inconel 718 show that the additively manufactured material reaches almost the lifetimes of conventionally‐rolled material under no‐dwell conditions. Introducing dwell times at the maximum temperature markedly reduces the lifetimes due to pronounced grain boundary sliding associated
Stefan Guth +6 more
wiley +1 more source
Deformation Mechanisms and Fracture of Ni-Based Metallic Glasses
Archives of Metallurgy and Materials, 2016 The cracking of materials and fracture surface is of great practical and academic importance. Over the last few years the development of the fractography of crystalline alloys resulted in a useful tool for the prediction or failure analysis.
Lesz S., Griner S., Nowosielski R.
doaj +1 more source
Proposal for a three-dimensional magnetic measurement method with nanometer-scale depth resolution
, 2018 We propose a magnetic measurement method based on combining depth sectioning and electron magnetic circular dichroism in scanning transmission electron microscopy.
Idrobo, Juan-Carlos +3 more
core +1 more source