Results 131 to 140 of about 498,478 (298)
Advanced Engineering Materials, EarlyView.Primary phases and a fatigue crack are studied in a forged blank of an aluminum alloy using synchrotron and laboratory X‐ray computed tomography. To image the crack, the fatigue test is interrupted, and a static tensile load is applied to open the crack.
Jakob Schröder +6 more
wiley +1 more source
Residual Stress States in Microstructurally Graded PBF–LB/M Austenitic Steel Components
Advanced Engineering Materials, EarlyView.This study examines microstructurally graded 316L rectangular tube profiles fabricated via PBF–LB/M using a dual‐laser system. A 1 kW top‐hat and a 400 W Gaussian laser create distinct grain sizes and crystallographic texture. Mechanical properties are linked to microstructural evolution driven by processing conditions.
Nico Möller +5 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.When realized as inserts in high‐pressure die casting, aluminum cooling channels for electric powertrain components and similar applications typically require a stabilizing filler to survive the process. The present study investigates relinquishing this filler using additively manufactured inserts promising performance improvements.
Dirk Lehmhus +9 more
wiley +1 more source
Project HIAM Informal Report, Dec. 1965 - May 1966 [PDF]
Research on planetary atmospheres, Venus dark side emission, ozone concentration, cloud and aerosol scattering, atmospheric radiation scattering, and earth heat budget and ...
Mc Govern, W. E.
core +1 more source
Advanced Engineering Materials, EarlyView.This work reveals the phase composition and quantitative morphology analysis of precipitation‐hardened Fe32Cu12Ni11Ti16Al29 complex‐concentrated alloy. The precipitates are shown to have a high coherency. Morphology transition between sphere, cuboidal, and elongated morphology is observed. Finally, the overaging behavior is captured using microhardness.
Rostyslav Nizinkovskyi +4 more
wiley +1 more source
Comparative Study of Experimental Methods for Measuring Thermal Properties of 100Cr6 Steel Powders
Advanced Engineering Materials, EarlyView.This study investigates the thermal properties of 100Cr6 steel in both bulk and powder forms. Measuring the very low thermal conductivity typically exhibited by powders poses significant challenges. To address this, two novel measurement techniques—temperature gradient and finite laser pulse response—are introduced and evaluated by comparison with the ...
Junsheng Zhuo +8 more
wiley +1 more source
Effectiveness of additional lead shielding to protect staff from scattering radiation during endoscopic retrograde cholangiopancreatography procedures. [PDF]
J Radiat Res, 2018 Morishima Y, Chida K, Meguro T.
europepmc +1 more source
Aerosol scattering of ultraviolet sunlight in the tropical maritime atmosphere [PDF]
The effects of atmospheric aerosol scattering on the vertical profile of solar ultraviolet radiation are investigated. Measurements of diffuse and total ultraviolet radiation were made using a rocketborne optical sonde in the marine atmosphere of Antigua.
Fraser, R. S., Ghazi, A., Krueger, A. J.
core +1 more source
Advanced Functional Materials, EarlyView.Graded refractive index (GRI) structures are prepared from the layer‐by‐layer spray coating of the mesoporous SiO2 nanoparticles, showing high solar transparency and thermal emissivity. Under outdoor conditions, after 50 days, the GRI‐coated photovoltaics show on average 6.65 ± 1.48 °C lower than that of the non‐coated references, maintaining 80.9 ± 8 ...
Heesuk Jung +14 more
wiley +1 more source
Advanced Functional Materials, EarlyView.Transarterial Chemoembolization (TACE) may aggravate liver fibrosis. In this study, a novel oral targeting nanoemulsion is fabricated to enhance the therapeutic effect of antifibrotic drug‐pirfenidone (PFD) on fibrosis after TACE. Studies have shown that PFD nanoemulsion can enhance the oral liver targeting effect of PFD, and effectively improve the ...
Zhimei Cheng +12 more
wiley +1 more source